A nonlinear flow reservoir mathematical model was established based on the flow characteristic of low-permeability reservoir.The well-grid equations were deduced and the dimensionless permeability coefficient was intr...A nonlinear flow reservoir mathematical model was established based on the flow characteristic of low-permeability reservoir.The well-grid equations were deduced and the dimensionless permeability coefficient was introduced to describe the permeability variation of nonlinear flow.The nonlinear flow numerical simulation program was compiled based on black-oil model.A quarter of five-spot well unit was simulated to study the effect of nonlinear flow on the exploitation of low-permeability reservoir.The comprehensive comparison and analysis of the simulation results of Darcy flow,quasi-linear flow and nonlinear flow were provided.The dimensionless permeability coefficient distribution was gained to describe the nonlinear flow degree.The result shows that compared with the results of Darcy flow,when considering nonlinear flow,the oil production is low,and production decline is rapid.The fluid flow in reservoir consumes more driving energy,which reduces the water flooding efficiency.Darcy flow model overstates the reservoir flow capability,and quasi-linear flow model overstates the reservoir flow resistance.The flow ability of the formation near the well and artificial fracture is strong while the flow ability of the formation far away from the main streamline is weak.The nonlinear flow area is much larger than that of quasi-linear flow during the fluid flow in low-permeability reservoir.The water propelling speed of nonlinear flow is greatly slower than that of Darcy flow in the vertical direction of artificial fracture,and the nonlinear flow should be taken into account in the well pattern arrangement of low-permeability reservoir.展开更多
In order to evaluate the need of controlling the temperature of water discharged from the Fenhe Reservoir, the reservoir water temperature distribution was examined. A three-dimensional mathematical model was used to ...In order to evaluate the need of controlling the temperature of water discharged from the Fenhe Reservoir, the reservoir water temperature distribution was examined. A three-dimensional mathematical model was used to simulate the in-plane and vertical distribution of water temperature. The parameters of the model were calibrated with field data of the temperature distribution in the Fenhe Reservoir. The simulated temperature of discharged water is consistent with the measured data. The difference in temperature between the discharged water and the natural river channel is less than 3 ℃ under the current operating conditions. This will not significantly impact the environment of downstream areas.展开更多
The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling te...The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling techniques are not readily assimilated by students,because the traditional modeling needs to obey the complicated physical laws for different engineering areas and requires a highly iterative process.In this paper,the simulation-based graphic modeling method is introduced to help students model the system and improve their performance in engineering education.The results from the questionnaire indicate that the simulation-based graphic method can help students to do the modeling of the system and improve their performance compared to the traditional ways.展开更多
This study aimed to optimize cross-sectional area of the extruder and the flow rate of the material through the extruder. Extrusion process was first modelized using the continuum mechanics method before being simulat...This study aimed to optimize cross-sectional area of the extruder and the flow rate of the material through the extruder. Extrusion process was first modelized using the continuum mechanics method before being simulated with the commercial software LS-DYNA using the Johnson-Cook model based on the finite element method after optimization of the factors with simplex algorithm. The study was carried out on a connecting rod: diameter of 145 mm, cross-section of 1.65 m<sup>2</sup>, length of 0.25 m, volume of 0.41 m<sup>3</sup> and a mass of 37 kg. Optimum parameters obtained were temperature of 850℃, flow rate of 0.237 m/s, die diameter of 19.2 mm, pin diameter of 14 mm, extrusion strength of 565.6 kN and press pressure of 245 GPa. From these factors, a blank was obtained with external and internal diameters of 19.2 and 14 mm respectively over a length of 28 m with a thickness of 2.6 mm. Simulation using LS-DYNA software resulted in a difference in values of 7.4% between optimization and simulation when the difference of 2.4% was found between modelling and simulation. These values make the process optimal for industrial application to improve the extrusion requirements of copper tubes.展开更多
基金Project(10672187) supported by the National Natural Science Foundation of ChinaProject(2008ZX05000-013-02) supported by the National Science and Technology Major Program of China
文摘A nonlinear flow reservoir mathematical model was established based on the flow characteristic of low-permeability reservoir.The well-grid equations were deduced and the dimensionless permeability coefficient was introduced to describe the permeability variation of nonlinear flow.The nonlinear flow numerical simulation program was compiled based on black-oil model.A quarter of five-spot well unit was simulated to study the effect of nonlinear flow on the exploitation of low-permeability reservoir.The comprehensive comparison and analysis of the simulation results of Darcy flow,quasi-linear flow and nonlinear flow were provided.The dimensionless permeability coefficient distribution was gained to describe the nonlinear flow degree.The result shows that compared with the results of Darcy flow,when considering nonlinear flow,the oil production is low,and production decline is rapid.The fluid flow in reservoir consumes more driving energy,which reduces the water flooding efficiency.Darcy flow model overstates the reservoir flow capability,and quasi-linear flow model overstates the reservoir flow resistance.The flow ability of the formation near the well and artificial fracture is strong while the flow ability of the formation far away from the main streamline is weak.The nonlinear flow area is much larger than that of quasi-linear flow during the fluid flow in low-permeability reservoir.The water propelling speed of nonlinear flow is greatly slower than that of Darcy flow in the vertical direction of artificial fracture,and the nonlinear flow should be taken into account in the well pattern arrangement of low-permeability reservoir.
文摘In order to evaluate the need of controlling the temperature of water discharged from the Fenhe Reservoir, the reservoir water temperature distribution was examined. A three-dimensional mathematical model was used to simulate the in-plane and vertical distribution of water temperature. The parameters of the model were calibrated with field data of the temperature distribution in the Fenhe Reservoir. The simulated temperature of discharged water is consistent with the measured data. The difference in temperature between the discharged water and the natural river channel is less than 3 ℃ under the current operating conditions. This will not significantly impact the environment of downstream areas.
基金supported by the Jiangsu Science and Technology Programme(Grant No.BK20230229)the Research Development Fund of Xi’an JiaotongLiverpool University under Grant RDF-21-01-022+1 种基金the XJTLU AI University Research Centre,Jiangsu Province Engineering Research Centre of Data ScienceCognitive Computation at XJTLU and SIP AI innovation platform(YZCXPT2022103)。
文摘The first step for engineering students to understand the practical system is to describe the system,which means to establish the mathematic model for the considered system.However,traditional mathematical modeling techniques are not readily assimilated by students,because the traditional modeling needs to obey the complicated physical laws for different engineering areas and requires a highly iterative process.In this paper,the simulation-based graphic modeling method is introduced to help students model the system and improve their performance in engineering education.The results from the questionnaire indicate that the simulation-based graphic method can help students to do the modeling of the system and improve their performance compared to the traditional ways.
文摘This study aimed to optimize cross-sectional area of the extruder and the flow rate of the material through the extruder. Extrusion process was first modelized using the continuum mechanics method before being simulated with the commercial software LS-DYNA using the Johnson-Cook model based on the finite element method after optimization of the factors with simplex algorithm. The study was carried out on a connecting rod: diameter of 145 mm, cross-section of 1.65 m<sup>2</sup>, length of 0.25 m, volume of 0.41 m<sup>3</sup> and a mass of 37 kg. Optimum parameters obtained were temperature of 850℃, flow rate of 0.237 m/s, die diameter of 19.2 mm, pin diameter of 14 mm, extrusion strength of 565.6 kN and press pressure of 245 GPa. From these factors, a blank was obtained with external and internal diameters of 19.2 and 14 mm respectively over a length of 28 m with a thickness of 2.6 mm. Simulation using LS-DYNA software resulted in a difference in values of 7.4% between optimization and simulation when the difference of 2.4% was found between modelling and simulation. These values make the process optimal for industrial application to improve the extrusion requirements of copper tubes.
