Geochemical and Isotopic Techniques Constraints on the Origin,Evolution,and Residence Time of Low-enthalpy Geothermal Water in Western Wugongshan,SE China

Geothermal resources are increasingly gaining attention as a competitive,clean energy source to address the energy crisis and mitigate climate change.The Wugongshan area,situated in the southeast coast geothermal belt of China,is a typical geothermal anomaly and contains abundant medium-and low-temperature geothermal resources.This study employed hydrogeochemical and isotopic techniques to explore the cyclic evolution of geothermal water in the western Wugongshan region,encompassing the recharge origin,water-rock interaction mechanisms,and residence time.The results show that the geothermal water in the western region of Wugongshan is weakly alkaline,with low enthalpy and mineralization levels.The hydrochemistry of geothermal waters is dominated by Na-HCO_(3)and Na-SO_(4),while the hydrochemistry types of cold springs are all Na-HCO_(3).The hydrochemistry types of surface waters and rain waters are NaHCO_(3)or Ca-HCO_(3).The δD and δ^(18)O values reveal that the geothermal waters are recharged by atmospheric precipitation at an altitude between 550.0 and 1218.6 m.Molar ratios of maj or solutes and isotopic compositions of^(87)Sr/^(86)Sr underscore the significant role of silicate weathering,dissolution,and cation exchange in controlling geothermal water chemistry.Additionally,geothermal waters experienced varying degrees of mixing with cold water during their ascent.Theδ^(13)C values suggest that the primary sources of carbon in the geothermal waters were biogenic and organic.Theδ^(34)S value suggests that the sulfates in geothermal water originate from sulfide minerals in the surrounding rock.Age dating using 3H and^(14)C isotopes suggests that geothermal waters have a residence time exceeding 1 kaBP and undergo a long-distance cycling process.

Particle residence time distribution and axial dispersion coefficient in a pressurized circulating fluidized bed by using multiphase particle-in-cell simulation

The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.

Mathematical model for precursor gas residence time in isothermal CVD process of C/C composites

In the chemical vapor deposition（CVD） process of C/C composites,the dynamics and mechanism of precursor gas flowing behavior were analyzed mathematically,in which the precursor gas was infiltrated by the pressure difference of the gas flowing through felt.Differential equations were educed which characterized the relations among the pressure inside the felt,the pressure outside the felt of the precursor gas and the porosity of the felt as a function of CVD duration.The gas residence time during the infiltration process through the felt was obtained from the differential equations.The numerical verification is in good agreement with the practical process,indicating the good reliability of the current mathematical model.

Effects of Temperature and Hydraulic Residence Time (HRT) on Treatment of Dilute Wastewater in a Carrier Anaerobic Baffled Reactor

Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.

Estimation of groundwater residence time and recession rate in watershed of the Loess Plateau

Groundwater residence time is an important indicator of hydrological cycle and essential for water resources development and utilization. In this paper, groundwater residence time in non-flood season, flood season and water year has been determined from daily streamflow hydrograph of ten hydrological stations in Wudinghe River Basin located in the middle reaches of the Yellow River Basin. Results have showed that： baseflow recession constant in Wudinghe River Basin ranges from 0.72 to 0.94 with a larger recession rate in flood season than that in non-flood season. Spatially, the recession rate of baseflow in loess area is the biggest, but is the smallest in the sandy area. The half-residence time of groundwater varies from 1.8 to 45.5 days while overall residence time of groundwater is between 34 and 342 days in different sub-basins of the Wudinghe River Basin. The annual average overall residence time of groundwater decreases from 117 days in the upper reaches to 73 days in the lower reaches.

Particle Residence Time in Column Flotation Based on Cyclonic Separation

The cyclonic static micro-bubble column flotation (FCSMC) is an effective separation device for fine particle treatment. The high mineralization rate and short flotation time of this equipment can be attributed to its unique cyclonic force field. It also has been observed that the presence of a cyclonic force field leads to a lower bottom separation size limit and a reduction of unselective entrainment. The collection zone of the column is considered to consist of two parts,a column separation zone and a cyclonic zone. Total recovery of the collection zone was developed. For our study,we analyzed the particle movement in the cyclonic zone. Particle residence time equations for the cyclonic zone were de-rived by force analysis. Results obtained in this study provide a theoretical foundation for the design and scale-up of the FCSMC.

Modeling on Residence Time Distribution in Subsurface Flow Constructed Wetlands by Multi Flow Dispersion Model

As an important design factor for constructed wetlands,hydraulic retention time and its distribution will affect the treatment performance.Instantaneously injected sodium chloride tracers were used to obtain residence time distributions of the lab scale subsurface flow constructed wetland.Considering the presence of trailing and multiple peaks of the tracer breakthrough curve,the multi flow dispersion model(MFDM)was used to fit the experimental tracer breakthrough curves.According to the residual sum of squares and comparison between the experimental values and simulated values of the tracer concentration,MFDM could fit the residence time distribution(RTD)curve satisfactorily,the results of which also reflected the layered structure of wetland cells,thus to give reference for application of MFDM to the same kind of subsurface flow constructed wetlands.

Effects of loading rate and hydraulic residence time on anoxic sulfide biooxidation

The optimal operation conditions in an anoxic sulfide oxidizing (ASO) bioreactor were investigated. The maximal removal rates for sulfide and nitrate were found to be 4.18 kg/(m3·d) and 1.73 kg/(m3·d), respectively. The volumetrical volumetric loading rates (LRs) observed through decreasing hydraulic retention time (HRT) at fixed substrate concentration are higher than those by increasing substrate concentration at fixed HRT. The sulfide oxidation in ASO reactor was partially producing both sulfate and sulfur; but the amount of sulfate produced was approximately one third that of sulfur. The process was able to tolerate high sulfide concentration, as the sulfide removal percentage always remained near 99% when influent concentration was up to 580 mg/L. It tolerated relatively lower nitrate concentration because the removal percentage dropped to 85% when influent con- centration was increased above 110 mg/L. The process can tolerate shorter HRT but careful operation is needed. Nitrate conversion was more sensitive to HRT than sulfide conversion since the process performance deteriorated abruptly when HRT was decreased from 3.12 h to 2.88 h. In order to avoid nitrite accumulation in the reactor, the influent sulfide and nitrate concentrations should be kept at 280 mg/L and 67.5 mg/L respectively. Present biotechnology is useful for removing sulfides from sewers and crude oil.

Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multi-jet combustion reactor

In this work,by establishing a three-dimensional physical model of a 1000-ton industrial multi-jet combustion reactor,a hexahedral structured grid was used to discretize the model.Combined with realizable k–εmodel,eddy-dissipation-concept,discrete-ordinate radiation model,hydrogen 19-step detailed reaction mechanism,air age user-defined-function,velocity field,temperature field,concentration field and gas arrival time in the reactor were numerically simulated.The Euler–Lagrange method combined with the discrete-phase-model was used to reveal the flow characteristics of particles in the reactor,and based on this,the effects of the reactor aspect ratios,central jet gas velocity and particle size on the flow field characteristics and particle back-mixing degree in the reactor were investigated.The results show that with the decrease of aspect ratio in the combustion reactors,the velocity and temperature attenuation in the reactor are intensified,the vortex phenomenon is aggravated,and the residence time distribution of nanoparticles is more dispersed.With the increase in the central jet gas velocities in reactors,the vortex lengthens along the axis,the turbulence intensity increases,and the residence time of particles decreases.The back-mixing degree and residence time of particles in the reactor also decrease with the increase in particle size.The simulation results can provide reference for the structural regulation of nanoparticles and the structural design of combustion reactor in the process of gas combustion synthesis.

Isotope implications of groundwater recharge,residence time and hydrogeochemical evolution of the Longdong Loess Basin,Northwest China

Groundwater plays a dominant role in the eco-environmental protection of arid and semi-arid regions.Understanding the sources and mechanisms of groundwater recharge,the interactions between groundwater and surface water and the hydrogeochemical evolution and transport processes of groundwater in the Longdong Loess Basin,Northwest China,is of importance for water resources management in this ecologically sensitive area.In this study,71 groundwater samples(mainly distributed at the Dongzhi Tableland and along the Malian River)and 8 surface water samples from the Malian River were collected,and analysis of the aquifer system and hydrological conditions,together with hydrogeochemical and isotopic techniques were used to investigate groundwater sources,residence time and their associated recharge processes.Results show that the middle and lower reaches of the Malian River receive water mainly from groundwater discharge on both sides of valley,while the source of the Malian River mainly comes from local precipitation.Groundwater of the Dongzhi Tableland is of a HCO3-Ca-Na type with low salinity.The reverse hydrogeochemical simulation suggests that the dissolution of carbonate minerals and cation exchange between Ca^(2+),Mg^(2+)and Na+are the main water-rock interactions in the groundwater system of the Dongzhi Tableland.Theδ^(18)O(from-11.70‰to-8.52‰)andδ2H(from-86.15‰to-65.75‰)values of groundwater are lower than the annual weighted average value of precipitation but closer to summer-autumn precipitation and soil water in the unsaturated zone,suggesting that possible recharge comes from the summer-autumn monsoonal heavy precipitation in the recent past(≤220 a).The corrected 14C ages of groundwater range from 3,000 to 25,000 a old,indicating that groundwater was mainly from precipitation during the humid and cold Late Pleistocene and Holocene periods.Groundwater flows deeper from the groundwater table and from the center to the east,south and west of the Dongzhi Tableland with estimated migration rate of 1.29-1.43 m/a.The oldest groundwater in the Quaternary Loess Aquifer in the Dongzhi Tableland is approximately 32,000 a old with poor renewability.Based on theδ^(18)O temperature indicator of groundwater,we speculate that temperature of the Last Glacial Maximum in the Longdong Loess Basin was 2.4℃-6.0℃ colder than the present.The results could provide us the valuable information on groundwater recharge and evolution under thick loess layer,which would be significative for the scientific water resources management in semi-arid regions.

An Estimation Method for Kill Probability Based on Random Residence Time Series

Relations between statistical residence time series and effective shooting are analyzed in accordance with the properties of the random residence time of maneuver targets crossing shot area in a given time. An estimation method for kill probability is proposed, which solves the probability of number of residence times satisfied effective shooting in given time. Some expressions and their approximate formulae of kill probability are derived, under known the distribution of residence time series. Theoretical analysis and simulation results show that this method is suitable for evaluating the hit ability of fire system for maneuver targets in random shooting.

Effects of Reducing River Flow on Pulse Residence Time in Little Manatee River,USA

Residence time is an important indicator for river environmental management.In this paper,a 3D hydrodynamic model has been successfully applied to Little Manatee River to characterize the mixing and transport process and residence time.The model employs horizontal curvilinear orthogonal grids to represent the complex river system that consists of branches and bayous.The model has been satisfactorily calibrated and verified by using two continuous data sets.The data sets consist of hourly observations of all forcing boundaries,including freshwater inputs,tides,winds,salinity and temperatures at bay boundary,and air temperatures for model simulations.The data sets also consist of hourly observations of water levels,salinity,and temperature at several river stations.The calibrated and verified hydrodynamic model was used to predict residence time in the Little Manatee River.Under the minimum flow of 0.312 m3/s,the pulse residence time(PRT) is 108 days.Model simulations were also conducted for 17 flow scenarios.Empirical regression equations have been satisfactorily derived to correlate PRT to freshwater inflow.Correlation coefficient R2 is 0.982 for PRT.

THE RESIDENCE TIME DISTRIBUTION FOR MULTIFLOW SYSTEM

In this paper,the superposition rule of the residence time distribution functions for the general systemhaving multiple inlet and outlet streams has been described and proved rigorously.For the cascade ves-sels system where the processed material in separate stages may be nonideally mixed in various degrees andthe volumes of separate stages may not be equal,the overall residence time distribution function E(t)and eachE(t)of the flow systems have been derived.The applications of these results to various flow systems havebeen discussed.

Gas Residence Time Distributions in a Spouted Bed

In a spouted bed of 80mm in ID and 1700mm in height, the gas residence time distributions at different radial positions in both spout and annular area were measured with five different kinds of particles as spouting material, air as spouting gas, and hydrogen as tracer. The effects of superficial gas velocity, operating pressure, particle size and its category on gas residence time distribution were discussed. It was found that the gas velocity profile in spout was more uniform than that in annulus. It could be concluded that the gas flow in the spout could be treated as a plug-flow, while that in the annulus inhibited a strong non-ideal flow behavior. Increasing the superficial gas velocity and decreasing the operating pressure, the particle density and its size gave rise to spouting disturbance, thus the measured tracer concentrations vs. time curves fluctuated. The variances of residence time distribution curves could be taken as a measure of the gas fluctuation degree.

Residence Time Distribution at Laminar Pulsatile Flow in a Straight Pipe

This paper deals with the problem of theoretical identification of the residence time distribution （RTD） characteristics of a straight pipe at laminar pulsatile flow, if tracer diffusion can be neglected. This situation is typical for micro-apparatuses （e.g. fluidic element） and also for flow in large arteries. Residence time distribution based on velocity profiles at pulsatile flow of a Newtonian liquid in a rigid pipe will be derived theoretically and compared with the well known results for a constant flow rate E（τ） = τ-^2/2τ^3 at τ 〉 τ^-/2, where E （τ） is differential distribution, x is residence time and τ^- is the mean residence time. The following part of the paper deals stimulus response experimental techniques using tracers. The principal problem related to laminar and convection dominated pulsatile flows is discussed： Can the impulse response also be identified with the actual residence time distribution in the case of variable flow？ The general answer is no, and differences between RTD and impulse responses are evaluated as a function of the frequency and amplitude of pulsatile flows.

Flow Pattern and Residence Time of Groundwater within Volta River Basin in Benin(Northwestern Benin)

The knowledge about groundwater flow conditions within Volta river basin in Benin, has restricted information coming to piezometry, water storage time, water path, and water quality. A good groundwater resources assessment of this sudano-sahelian area, is a huge condition for the sustainable management of water resources, which since the part of the 20th century is facing a severe drought that leads to a greater aridity. This article provides a summary with the main elements of carbon isotope (13C and 14C) as well as tritium (3H) coupled with hydrogeological and hydrochemical data. The goal is to improve the initial water recharging and the groundwater flow system within the aquifer. Two main results can be produced from the groundwater chemistry. First, the interactions between groundwater and clay minerals related to the residence time of groundwater are indicated by a slight evolution of Ca-HCO3 and Ca-Mg-HCO3 to Na-HCO3. Beside that towards water types Cl-NO3 indicates the anthropogenic influence on groundwater, related to agricultural activities and sanitation conditions. The carbon-14 activity measured on the TDIC is between 17.29 and 85.47 pmC. Therefore, it contains some samples covering a wide period of time from now to the Holocene implying a continuous system recharging over time. All the data confirm the assumption of a homogeneous, largely unified aquifer system with a multi-layer structure, but it also points out the low resource sustainability and a strong anthropogenic contamination of the most superficial horizons.

Numerical analysis on the transport properties and residence time distribution of ribbon biomass particles in a riser reactor based on CFD-DEM approach

A bended ribbon biomass particle model was developed to explore the dynamic transport properties inside a riser reactor.Residence time distribution(RTD)of the particles was analyzed by using the Eulerian-Lagrange method.The effects of sampling height,particle density,particle size and gas-to-solid mass ratio on RTD were investigated.The coupled Computational Fluid Dynamics and Discrete Element Method(CFD-DEM)model was verified firstly by experimental data on pressure drop and residence time distribution density function.The simulation results demonstrated that the ribbon biomass particles display a typical annular-core spatial distribution during transportation.The RTD of particles exhibit an approximate single-peaked normal distribution.The mean residence time(MRT)can reach up to 0.7 s when the particle density is 1200 kg/m^(3).Particle with higher density has longer mean residence time.The flow patterns are closer to plug flow if particle length over 12 mm.The particle flow pattern is not sensitive to changes in particle density and size,while the gas-to-material mass ratio has a significant impact on it.

Residence time distribution of wood chips in a semi-industrial multiple hearth furnace using RFID tracers Author links open overlay panel

In continuous biomass torrefaction plants,the products'yields,composition and homogeneity highly depend on the residence time of particles.A characterization of particle residence time distribution(RTD)was therefore carried out in an industrial-scale multiple hearth furnace on poplar wood chips using radio frequency identification tracers.The effects of operating conditions,namely,mass flow rate of biomass,shaft speed of the rabbling system and interdental length on the RTD were studied.The increase of shaft speed and mass flow rate reduces particles’mean residence time.Lowering the length between two successive teeth also increases the bed speed.Uncontrollable biomass accumulation(also called“bulldozing”)was observed during several tests.This phenomenon is favored by a high mass flow rate of resources,a small interdental length between the teeth and a low shaft speed.RTD measurements were compared to the axial dispersion model.For all tests,the Peclet number is ranging between 20 and 62,indicating that the multiple hearth furnace cannot be modelled as an ideal plug flow reactor.

Measurement,Modelling and Analysis of Residence Time Distribution Characteristics in a Continuous Hydrothermal Reactor

Understanding the residence time distribution(RTD)of a continuous hydrothermal reactor is of great significance to improve product quality and reaction efficiency.In this work,an on-line measurement system is attached to a continuous reactor to investigate the characteristics of RTD.An approach that can accurately fit and describe the experimental measured RTD curve by finding characteristic values is proposed for analysis and comparison.The RTD curves of three experiment groups are measured and the characteristic values are calculated.Results show that increasing total flow rate and extending effective reactor length have inverse effect on average residence time,but they both cause the reactor to approach a plug flow reactor and improve the materials leading.The branch flow rate fraction has no significant effect on RTD characteristics in the scope of the present work except the weak negative correlation with the average residence time.Besides,the natural convection stirring effect can also increase the average residence time,especially when the forced flow is weak.The analysis reveals that it is necessary to consider the matching of natural convection,forced flow and reactor size to control RTD when designing the hydrothermal reactor and working conditions.