AIM: To determine residual refractive error after cataract surgery in pseudophakic eyes and its relationship with age, sex, and axial length(AL).METHODS: In this population-based cross-sectional study, the sampling wa...AIM: To determine residual refractive error after cataract surgery in pseudophakic eyes and its relationship with age, sex, and axial length(AL).METHODS: In this population-based cross-sectional study, the sampling was performed on individuals aged 60y and above in Tehran, Iran using a multi-stage stratified random cluster sampling method. Pseudophakic eyes with a best-corrected visual acuity of 20/32 or better were analyzed and their refractive results were reported.RESULTS: The mean spherical equivalent(SE) refraction was-0.34±0.97 diopters(D) and the mean absolute SE was 0.72±0.74 D with a median of 0.5 D. Moreover, 32.68%(n=546, 95%CI: 30.27%-35.08%), 53.67%(n=900, 95%CI: 51.23%-56.1%), 68.99%(n=1157, 95%CI: 66.96%-71.02%), and 79.73%(n=1337, 95%CI: 77.69%-81.76%) of the eyes had a residual SE within ±0.25, ±0.50, ±0.75, and ±1.00 D of emmetropia, respectively. According to the multiple logistic regression model, increasing age was associated with a statistically significant decrease in predictability for all cut points. Moreover, the predictability based on all cut points was significantly lower in individuals with an AL longer than 24.5 mm than in those with an AL between 22 to 24.5 mm.CONCLUSION: Based on the results, the accuracy of intraocular lens(IOL) power calculation is lower for those who underwent cataract surgery during the last 5y in Tehran, Iran. Among the most important influential factors, the choice of IOL or it's power disproportionate to eye conditions and age can be mentioned.展开更多
For the product degradation process with random effect (RE), measurement error (ME) and nonlinearity in step-stress accelerated degradation test (SSADT), the nonlinear Wiener based degradation model with RE and ME is ...For the product degradation process with random effect (RE), measurement error (ME) and nonlinearity in step-stress accelerated degradation test (SSADT), the nonlinear Wiener based degradation model with RE and ME is built. An analytical approximation to the probability density function (PDF) of the product's lifetime is derived in a closed form. The process and data of SSADT are analyzed to obtain the relation model of the observed data under each accelerated stress. The likelihood function for the population-based observed data is constructed. The population-based model parameters and its random coefficient prior values are estimated. According to the newly observed data of the target product in SSADT, an analytical approximation to the PDF of its residual lifetime (RL) is derived in accordance with its individual degradation characteristics. The parameter updating method based on Bayesian inference is applied to obtain the posterior value of random coefficient of the RL model. A numerical example by simulation is analyzed to verify the accuracy and advantage of the proposed model.展开更多
Residual based on a posteriori error estimates for conforming finite element solutions of incompressible Navier-Stokes equations with stream function form which were computed with seven recently proposed two-level met...Residual based on a posteriori error estimates for conforming finite element solutions of incompressible Navier-Stokes equations with stream function form which were computed with seven recently proposed two-level method were derived. The posteriori error estimates contained additional terms in comparison to the error estimates for the solution obtained by the standard finite element method. The importance of these additional terms in the error estimates was investigated by studying their asymptotic behavior. For optimal scaled meshes, these bounds are not of higher order than of convergence of discrete solution.展开更多
In this paper,we present a nonrecursive residual Monte Carlo method for estimating discretization errors associated with the S_(N) transport solution to radiation transport problems.Although this technique is general,...In this paper,we present a nonrecursive residual Monte Carlo method for estimating discretization errors associated with the S_(N) transport solution to radiation transport problems.Although this technique is general,we applied it to the mono-energetic 1-D S_(N) equation with linear-discontinuous finite element method spatial discretization as a demonstration of the theory for the purpose of this study.Two angular flux representations:conforming and simplified representations were considered in this analysis,and the results were compared.It is shown that the simplified representation dramatically reduces the memory footprint and computational complexity of residual source generation and sampling while accurately capturing the error associated with certain types of responses.展开更多
In this paper, we present two new algorithms in residue number systems for scaling and error correction. The first algorithm is the Cyclic Property of Residue-Digit Difference (CPRDD). It is used to speed up the resid...In this paper, we present two new algorithms in residue number systems for scaling and error correction. The first algorithm is the Cyclic Property of Residue-Digit Difference (CPRDD). It is used to speed up the residue multiple error correction due to its parallel processes. The second is called the Target Race Distance (TRD). It is used to speed up residue scaling. Both of these two algorithms are used without the need for Mixed Radix Conversion (MRC) or Chinese Residue Theorem (CRT) techniques, which are time consuming and require hardware complexity. Furthermore, the residue scaling can be performed in parallel for any combination of moduli set members without using lookup tables.展开更多
In this paper,average bit error probability(ABEP)bound of optimal maximum likelihood(ML)detector is first derived for ultra massive(UM)multiple-input-multiple-output(MIMO)system with generalized amplitude phase modula...In this paper,average bit error probability(ABEP)bound of optimal maximum likelihood(ML)detector is first derived for ultra massive(UM)multiple-input-multiple-output(MIMO)system with generalized amplitude phase modulation(APM),which is confirmed by simulation results.Furthermore,a minimum residual criterion(MRC)based lowcomplexity near-optimal ML detector is proposed for UM-MIMO system.Specifically,we first obtain an initial estimated signal by a conventional detector,i.e.,matched filter(MF),or minimum mean square error(MMSE)and so on.Furthermore,MRC based error correction mechanism(ECM)is proposed to correct the erroneous symbol encountered in the initial result.Simulation results are shown that the performance of the proposed MRC-ECM based detector is capable of approaching theoretical ABEP of ML,despite only imposing a slightly higher complexity than that of the initial detector.展开更多
The efficiency of an optimization method for acoustic emission/microseismic（AE/MS） source location is determined by the compatibility of its error definition with the errors contained in the input data.This compatib...The efficiency of an optimization method for acoustic emission/microseismic（AE/MS） source location is determined by the compatibility of its error definition with the errors contained in the input data.This compatibility can be examined in terms of the distribution of station residuals.For an ideal distribution,the input error is held at the station where it takes place as the station residual and the error is not permitted to spread to other stations.A comparison study of two optimization methods,namely the least squares method and the absolute value method,shows that the distribution with this character constrains the input errors and minimizes their impact,which explains the much more robust performance by the absolute value method in dealing with large and isolated input errors.When the errors in the input data are systematic and/or extreme in that the basic data structure is altered by these errors,none of the optimization methods are able to function.The only means to resolve this problem is the early detection and correction of these errors through a data screening process.An efficient data screening process is of primary importance for AE/MS source location.In addition to its critical role in dealing with those systematic and extreme errors,data screening creates a favorable environment for applying optimization methods.展开更多
Two systems of additive equations were developed to predict aboveground stand level biomass in log products and harvest residue from routinely measured or predicted stand variables for Pinus radiata plantations in New...Two systems of additive equations were developed to predict aboveground stand level biomass in log products and harvest residue from routinely measured or predicted stand variables for Pinus radiata plantations in New South Wales,Australia.These plantations were managed under three thinning regimes or stand types before clear-felling at rotation age by cut-to-length harvesters to produce sawlogs and pulpwood.The residue material following a clear-fell operation mainly consisted of stumps,branches and treetops,short off-cut and waste sections due to stem deformity,defects,damage and breakage.One system of equations did not include dummy variables for stand types in the model specification and was intended for more general use in plantations where stand density management regimes were not the same as the stand types in our study.The other system that incorporated dummy variables was for stand type-specific applications.Both systems of equations were estimated using 61 plot-based estimates of biomass in commercial logs and residue components that were derived from systems of equations developed in situ for predicting the product and residue biomass of individual trees.To cater for all practical applications,two sets of parameters were estimated for each system of equations for predicting component and total aboveground stand biomass in fresh and dry weight respectively.The two sets of parameters for the system of equations without dummy variables were jointly estimated to improve statistical efficiency in parameter estimation.The predictive performances of the two systems of equations were benchmarked through a leave-one-plot-out cross validation procedure.They were generally superior to the performance of an alternative two-stage approach that combined an additive system for major components with an allocative system for sub-components.As using forest harvest residue biomass for bioenergy has increasingly become an integrated part of forestry,reliable estimates of product and residue biomass will assist harvest and management planning for clear-fell operations that integrate cut-to-length log production with residue harvesting.展开更多
Fault-tolerant data transmission models based on the redundant residue number system are proposed in this paper; they can transmit data correctly between two ends unless the residue errors exceed the error-correction ...Fault-tolerant data transmission models based on the redundant residue number system are proposed in this paper; they can transmit data correctly between two ends unless the residue errors exceed the error-correction capability. The expressions for the probability of error are presented when the channel noise is additive Gaussian noise and each branch is M-ary orthogonal signaling modulation. The expressions of the probabilities of undetected and uncorrected error are also obtained when the redundant residue number system are single error-checking and single error-correcting model, respectively.展开更多
基金Supported by National Institute for Medical Research Development (NIMAD) affiliated with the Iranian Ministry of Health and Medical Education (No.963660)。
文摘AIM: To determine residual refractive error after cataract surgery in pseudophakic eyes and its relationship with age, sex, and axial length(AL).METHODS: In this population-based cross-sectional study, the sampling was performed on individuals aged 60y and above in Tehran, Iran using a multi-stage stratified random cluster sampling method. Pseudophakic eyes with a best-corrected visual acuity of 20/32 or better were analyzed and their refractive results were reported.RESULTS: The mean spherical equivalent(SE) refraction was-0.34±0.97 diopters(D) and the mean absolute SE was 0.72±0.74 D with a median of 0.5 D. Moreover, 32.68%(n=546, 95%CI: 30.27%-35.08%), 53.67%(n=900, 95%CI: 51.23%-56.1%), 68.99%(n=1157, 95%CI: 66.96%-71.02%), and 79.73%(n=1337, 95%CI: 77.69%-81.76%) of the eyes had a residual SE within ±0.25, ±0.50, ±0.75, and ±1.00 D of emmetropia, respectively. According to the multiple logistic regression model, increasing age was associated with a statistically significant decrease in predictability for all cut points. Moreover, the predictability based on all cut points was significantly lower in individuals with an AL longer than 24.5 mm than in those with an AL between 22 to 24.5 mm.CONCLUSION: Based on the results, the accuracy of intraocular lens(IOL) power calculation is lower for those who underwent cataract surgery during the last 5y in Tehran, Iran. Among the most important influential factors, the choice of IOL or it's power disproportionate to eye conditions and age can be mentioned.
基金supported by the National Defense Foundation of China(71601183)
文摘For the product degradation process with random effect (RE), measurement error (ME) and nonlinearity in step-stress accelerated degradation test (SSADT), the nonlinear Wiener based degradation model with RE and ME is built. An analytical approximation to the probability density function (PDF) of the product's lifetime is derived in a closed form. The process and data of SSADT are analyzed to obtain the relation model of the observed data under each accelerated stress. The likelihood function for the population-based observed data is constructed. The population-based model parameters and its random coefficient prior values are estimated. According to the newly observed data of the target product in SSADT, an analytical approximation to the PDF of its residual lifetime (RL) is derived in accordance with its individual degradation characteristics. The parameter updating method based on Bayesian inference is applied to obtain the posterior value of random coefficient of the RL model. A numerical example by simulation is analyzed to verify the accuracy and advantage of the proposed model.
文摘Residual based on a posteriori error estimates for conforming finite element solutions of incompressible Navier-Stokes equations with stream function form which were computed with seven recently proposed two-level method were derived. The posteriori error estimates contained additional terms in comparison to the error estimates for the solution obtained by the standard finite element method. The importance of these additional terms in the error estimates was investigated by studying their asymptotic behavior. For optimal scaled meshes, these bounds are not of higher order than of convergence of discrete solution.
文摘In this paper,we present a nonrecursive residual Monte Carlo method for estimating discretization errors associated with the S_(N) transport solution to radiation transport problems.Although this technique is general,we applied it to the mono-energetic 1-D S_(N) equation with linear-discontinuous finite element method spatial discretization as a demonstration of the theory for the purpose of this study.Two angular flux representations:conforming and simplified representations were considered in this analysis,and the results were compared.It is shown that the simplified representation dramatically reduces the memory footprint and computational complexity of residual source generation and sampling while accurately capturing the error associated with certain types of responses.
文摘In this paper, we present two new algorithms in residue number systems for scaling and error correction. The first algorithm is the Cyclic Property of Residue-Digit Difference (CPRDD). It is used to speed up the residue multiple error correction due to its parallel processes. The second is called the Target Race Distance (TRD). It is used to speed up residue scaling. Both of these two algorithms are used without the need for Mixed Radix Conversion (MRC) or Chinese Residue Theorem (CRT) techniques, which are time consuming and require hardware complexity. Furthermore, the residue scaling can be performed in parallel for any combination of moduli set members without using lookup tables.
基金supported in part by the National Key Research and Development Program of China under Grant 2019YFB1803400in part by the National Science Foundation of China under Grant 62001179in part by the Fundamental Research Funds for the Central Universities under Grant 2020kfyXJJS111.
文摘In this paper,average bit error probability(ABEP)bound of optimal maximum likelihood(ML)detector is first derived for ultra massive(UM)multiple-input-multiple-output(MIMO)system with generalized amplitude phase modulation(APM),which is confirmed by simulation results.Furthermore,a minimum residual criterion(MRC)based lowcomplexity near-optimal ML detector is proposed for UM-MIMO system.Specifically,we first obtain an initial estimated signal by a conventional detector,i.e.,matched filter(MF),or minimum mean square error(MMSE)and so on.Furthermore,MRC based error correction mechanism(ECM)is proposed to correct the erroneous symbol encountered in the initial result.Simulation results are shown that the performance of the proposed MRC-ECM based detector is capable of approaching theoretical ABEP of ML,despite only imposing a slightly higher complexity than that of the initial detector.
文摘The efficiency of an optimization method for acoustic emission/microseismic（AE/MS） source location is determined by the compatibility of its error definition with the errors contained in the input data.This compatibility can be examined in terms of the distribution of station residuals.For an ideal distribution,the input error is held at the station where it takes place as the station residual and the error is not permitted to spread to other stations.A comparison study of two optimization methods,namely the least squares method and the absolute value method,shows that the distribution with this character constrains the input errors and minimizes their impact,which explains the much more robust performance by the absolute value method in dealing with large and isolated input errors.When the errors in the input data are systematic and/or extreme in that the basic data structure is altered by these errors,none of the optimization methods are able to function.The only means to resolve this problem is the early detection and correction of these errors through a data screening process.An efficient data screening process is of primary importance for AE/MS source location.In addition to its critical role in dealing with those systematic and extreme errors,data screening creates a favorable environment for applying optimization methods.
基金This study was supported by the Australian Government Department of Agriculture,Fisheries and Forestry,the Rural Industries Research and Development Corporation,and Forests NSW.
文摘Two systems of additive equations were developed to predict aboveground stand level biomass in log products and harvest residue from routinely measured or predicted stand variables for Pinus radiata plantations in New South Wales,Australia.These plantations were managed under three thinning regimes or stand types before clear-felling at rotation age by cut-to-length harvesters to produce sawlogs and pulpwood.The residue material following a clear-fell operation mainly consisted of stumps,branches and treetops,short off-cut and waste sections due to stem deformity,defects,damage and breakage.One system of equations did not include dummy variables for stand types in the model specification and was intended for more general use in plantations where stand density management regimes were not the same as the stand types in our study.The other system that incorporated dummy variables was for stand type-specific applications.Both systems of equations were estimated using 61 plot-based estimates of biomass in commercial logs and residue components that were derived from systems of equations developed in situ for predicting the product and residue biomass of individual trees.To cater for all practical applications,two sets of parameters were estimated for each system of equations for predicting component and total aboveground stand biomass in fresh and dry weight respectively.The two sets of parameters for the system of equations without dummy variables were jointly estimated to improve statistical efficiency in parameter estimation.The predictive performances of the two systems of equations were benchmarked through a leave-one-plot-out cross validation procedure.They were generally superior to the performance of an alternative two-stage approach that combined an additive system for major components with an allocative system for sub-components.As using forest harvest residue biomass for bioenergy has increasingly become an integrated part of forestry,reliable estimates of product and residue biomass will assist harvest and management planning for clear-fell operations that integrate cut-to-length log production with residue harvesting.
基金Supported by the National Natural Science Foundation of China
文摘Fault-tolerant data transmission models based on the redundant residue number system are proposed in this paper; they can transmit data correctly between two ends unless the residue errors exceed the error-correction capability. The expressions for the probability of error are presented when the channel noise is additive Gaussian noise and each branch is M-ary orthogonal signaling modulation. The expressions of the probabilities of undetected and uncorrected error are also obtained when the redundant residue number system are single error-checking and single error-correcting model, respectively.
