Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these...Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these three factors can be manipulated to reduce the board density and resin content of particleboard without adversely influencing its mechanical properties. Some mathematical functional forms based on resin content, board density and slenderness ratio were regressed and an appropriate form was chosen. According to analysis of the results using SHAZAM 9 software, the exponential function best fit the experimental data. Finally, ＂indifference curves＂ of mechanical properties were illustrated and analyzed. The results indicated that negative effects of density or resin content reduction on mechanical properties could be compensated for by controlling particles＇ slenderness ratio. Interestingly, increases in slenderness ratio compensated for the negative effects of decreases in resin content or board density on module of rupture （MOR） and module of elasticity （MOE）. Moreover, this ＂compensation ratio＂ intensified as resin content or density decreased and/or as the MOR or MOE increased. On the other hand, reduction in slenderness ratio indicated a comple- mentary effect on reducing internal bond （IB） strength, a result of decreases in resin content or density. Moreover, this ＂complementary ratio＂ was intensified as resin content or density decreased and/or as IB strength increased.展开更多
The resin content in larch wood is usually determined by the traditionalBenzene-Alcohol Extract Method(BAEM).In order to meet the requirement of production prac-tice,the authors present two simple quick determination ...The resin content in larch wood is usually determined by the traditionalBenzene-Alcohol Extract Method(BAEM).In order to meet the requirement of production prac-tice,the authors present two simple quick determination methods,IR lamp method and hydrogenperoxide solution method.Compared with the results of traditional method,the results of newmethods are nearly the same as former,therefore,both two methods can reflect the change condi-tion of resin content in wood.展开更多
βray online monitoring technique for resin content measurement has been developed, which is characterized by simple operation, short measuring time, and high measuring accuracy. It has been used to measure the resin ...βray online monitoring technique for resin content measurement has been developed, which is characterized by simple operation, short measuring time, and high measuring accuracy. It has been used to measure the resin content of pregreg tapes during manufacturing of them. This paper gives the measuring results. Meanwhile, the effects of the deviation of the βray monitoring system itself and the variation of the release paper on the measuring accuracy have been analyzed and discussed.展开更多
Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and ...Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and controlled stress flexural fatigue test are used to study the performance of asphalt mixtures modified by epoxy resin including high-temperature stability, low-temperature cracking-resistance, and fatigue cracking-resistance, which are served to evaluate the modification effect of epoxy resin of different contents. With the addition of epoxy resin, all the three performances are improved greatly. However, when the amount of epoxy resin added is over a certain value, the modification effect will be stable with no extra benefit detected. Finally, in terms of the properties of the three respects, 20%, 30%, 30% are given separately as the proposal adding contents.展开更多
文摘Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these three factors can be manipulated to reduce the board density and resin content of particleboard without adversely influencing its mechanical properties. Some mathematical functional forms based on resin content, board density and slenderness ratio were regressed and an appropriate form was chosen. According to analysis of the results using SHAZAM 9 software, the exponential function best fit the experimental data. Finally, ＂indifference curves＂ of mechanical properties were illustrated and analyzed. The results indicated that negative effects of density or resin content reduction on mechanical properties could be compensated for by controlling particles＇ slenderness ratio. Interestingly, increases in slenderness ratio compensated for the negative effects of decreases in resin content or board density on module of rupture （MOR） and module of elasticity （MOE）. Moreover, this ＂compensation ratio＂ intensified as resin content or density decreased and/or as the MOR or MOE increased. On the other hand, reduction in slenderness ratio indicated a comple- mentary effect on reducing internal bond （IB） strength, a result of decreases in resin content or density. Moreover, this ＂complementary ratio＂ was intensified as resin content or density decreased and/or as IB strength increased.
文摘The resin content in larch wood is usually determined by the traditionalBenzene-Alcohol Extract Method(BAEM).In order to meet the requirement of production prac-tice,the authors present two simple quick determination methods,IR lamp method and hydrogenperoxide solution method.Compared with the results of traditional method,the results of newmethods are nearly the same as former,therefore,both two methods can reflect the change condi-tion of resin content in wood.
文摘βray online monitoring technique for resin content measurement has been developed, which is characterized by simple operation, short measuring time, and high measuring accuracy. It has been used to measure the resin content of pregreg tapes during manufacturing of them. This paper gives the measuring results. Meanwhile, the effects of the deviation of the βray monitoring system itself and the variation of the release paper on the measuring accuracy have been analyzed and discussed.
文摘Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and controlled stress flexural fatigue test are used to study the performance of asphalt mixtures modified by epoxy resin including high-temperature stability, low-temperature cracking-resistance, and fatigue cracking-resistance, which are served to evaluate the modification effect of epoxy resin of different contents. With the addition of epoxy resin, all the three performances are improved greatly. However, when the amount of epoxy resin added is over a certain value, the modification effect will be stable with no extra benefit detected. Finally, in terms of the properties of the three respects, 20%, 30%, 30% are given separately as the proposal adding contents.
