Design and validation of wireless strain test system for bridge based on the resistance strain sensor

In order to achieve an access to strain sensor data with wireless transmission in bridge engineering structure testing, a wireless strain test system is presented based on the resistance strain sensor of networks. The wireless bridge strain test system composed of master station and substation adopts the wireless method to realize the high accuracy data acquisition between the master station and the substation under a reliable communication protocol. The system has been tested in contrast with the present strain apparatus. Results show that the wireless system is high-reliable, and has many characteristics such as high efficiency, good precision, high stability with low cost, and good flexibility, without using the present communication network.

Voidage Measurement of Air-Water Two-phase Flow Based on ERT Sensor and Data Mining Technology

Based on an electrical resistance tomography(ERT) sensor and the data mining technology,a new voidage measurement method is proposed for air-water two-phase flow.The data mining technology used in this work is a least squares support vector machine(LS-SVM) algorithm together with the feature extraction method,and three feature extraction methods are tested:principal component analysis(PCA),partial least squares(PLS) and independent component analysis(ICA).In the practical voidage measurement process,the flow pattern is firstly identified directly from the conductance values obtained by the ERT sensor.Then,the appropriate voidage measurement model is selected according to the flow pattern identification result.Finally,the voidage is calculated.Experimental results show that the proposed method can measure the voidage effectively,and the measurement accuracy and speed are satisfactory.Compared with the conventional voidage measurement methods based on ERT,the proposed method doesn't need any image reconstruction process,so it has the advantage of good real-time performance.Due to the introduction of flow pattern identification,the influence of flow pattern on the voidage measurement is overcome.Besides,it is demonstrated that the LS-SVM method with PLS feature extraction presents the best measurement performance among the tested methods.

Fast-response,high-sensitivity multi-modal tactile sensors based on PPy/Ti_(3)C_(2)T_(x) films for multifunctional applications

In recent years,multi-modal flexible tactile sensors have become an important direction in the development of electronic skin because of their excellent sensitivity,flexibility and wearable properties.In this work,a humidity-pressure multi-modal flexible sensor based on polypyrrole(PPy)/Ti_(3)C_(2)T_(x) sensitive film packaged with porous polydimethylsiloxane(PDMS)is investigated by combining the sensitive structure generation mechanism of in situ polymerization to achieve the simultaneous detection of humidity and pressure,which has a sensitivity of 89,113.4Ω/%RH in a large humidity range of 0%-97%RH,and response/recovery time of 2.5/1.9 s.The tactile pressure sensing has a high sensitivity,a fast response of 67/52 ms,and a wide detection limit.The device also has excellent performance in terms of stability and repeatability,making it promising for respiratory pattern and motion detection.This work provides a new solution to address the construction of multi-modal tactile sensors with potential applications in the fields of medical health,epidemic prevention.

Design and Implementation of an Ultrasonic Heat Meter Based on MSP430F437

Flowing with the reform of the hot water heating method in China, heat meter will enter into households in the near future. A portable ultrasonic heat meter is designed in this paper. The meter uses chip microprocessor MSP430F437 as the data process core, and uses ultrasonic flow sensor to measure flow rate of the hot water, and capture input and output temperatures of the hot water using the thermal resistance sensor Ptl000, and then household energy consumption is calculated via temperature difference between input temperature and output temperature of the hot water multiplied by volume of hot water that is calculated though flow rate integration of hot water. In order to test the performance of the proposed heat meter, experiments is carried out. Both the temperature and flow measurement results satisfy the requirements of accuracy and the heat meter is effective in the heat measurement.

生物质衍生碳在电阻式应变/压力传感器中的最新应用进展与关键挑战

近年来电阻式应变/压力传感器在运动行为监测、人类健康诊断和人机交互等领域展现了不可替代的作用,因而刺激了人们对其需求的急剧增长.材料和结构设计对电阻式应变/压力传感器的性能有着不可忽视的影响,而生物质碳(BDCs)具有丰富的来源、多样的结构和令人满意的导电性等优良特性,被认为是制造电阻式应变/压力传感器的优异候选材料之一.本综述介绍了BDCs材料在电阻式应变/压力传感器领域的最新进展及其目前面临的主要挑战.首先,系统地概述和讨论了已报道的电阻式应变/压力传感器的分类方法、评价标准和传感机制.其次,总结了具有不同宏观结构(包括一维、二维和三维结构)的BDCs材料的制备及其在电阻式应变/压力传感器领域的最新应用进展.详细分析了具有不同宏观结构的BDCs材料在电阻应变/压力传感器领域的各自应用优势,并讨论了不同宏观结构与器件综合传感性能之间的关系.最后,提出了基于BDCs材料的电阻式应变/压力传感器的未来前景和主要挑战,及其未来发展的研究方向.

Ammonia sensing using arrays of silicon nanowires and graphene

Ammonia （NH3） is a toxic gas released in different industrial, agricultural and natural processes. It is also a biomarker for some diseases. These require NH3 sensors for health and safety reasons. To boost the sensitiv- ity of solid-state sensors, the effective sensing area should be increased. Two methods are explored and compared using an evaporating pool of 0.5 mL NH4OH （28% NH3）. In the first method an array of Si nanowires （Si NWA） is obtained via metal-assisted-electrochemical etching to increase the effective surface area. In the second method CVD graphene is suspended on top of the Si nanowires to act as a sensing layer. Both the effective surface area as well as the density of surface traps influences the amplitude of the response. The effective surface area of Si NWAs is 100 × larger than that of suspended graphene for the same top surface area, leading to a larger response in amp- litude by a factor of -7 notwithstanding a higher trap density in suspended graphene. The use of Si NWAs in- creases the response rate for both Si NWAs as well as the suspended graphene due to more effective NH3 diffu- sion processes.