Abrasion Resistant Refractory Materials

1 Scope This standard specifies the definition, classification, technical requirements, test methods, quality appraisal procedure, packing, marking, transportation, storage, and quality certificate of abrasion resistant refractory materials.

Strength Acquisition Mechanism of High Temperature Resistant Materials Prepared by Waste Architectural Ceramics

In order to realize the large-scale and high-value utilization of waste architectural ceramics,high-temperature resistant materials based on waste architectural ceramics were prepared with sodium silicate as the binder,clay/bauxite and metakaolin/bauxite as coating materials,and the cold strength obtaining mechanism was explored.The phase composition,the microstructure and the mechanical properties of the high temperature resistant materials based on waste architectural ceramics were tested and analyzed.The results showed that when the heat treatment temperature was between 110-1000℃,the strength of the samples mainly came from the physical adhesion of sodium silicate and fine powder.When the temperature rose to 1100℃,the strength of the sample was improved since the internal low-melting-point components melted and promoted sintering.The addition of clay and bauxite can effectively enhance the flexural strength of the samples when the heat treatment temperature is 1000℃.When the heat treatment temperature rises from 900 to 1000℃,the flexural strength of the samples will be enhanced owing to the formation of silica alumina spinel and mullite from metakaolin.

Evaluation on Diseases Resistance of Cotton Material and Its Utilization

Fusarium wilt and Verticillium wilt are important worldwide fungal diseases on cotton that cause damage to yield and quality.The pathogens survive in soil as microsclerotia for many years,and

High plastic Zr–Cu–Fe–Al–Nb bulk metallic glasses for biomedical applications

Four Zr–Cu–Fe–Al-based bulk metallic glasses（BMGs） with Zr contents greater than 65at% and minor additions of Nb were designed and prepared. The glass forming abilities, thermal stabilities, mechanical properties, and corrosion resistance properties of the prepared BMGs were investigated. These BMGs exhibit moderate glass forming abilities along with superior fracture and yield strengths compared to previously reported Zr–Cu–Fe–Al BMGs. Specifically, the addition of Nb into this quaternary system remarkably increases the plastic strain to 27.5%, which is related to the high Poisson＇s ratio and low Young＇s and shear moduli. The Nb-bearing BMGs also exhibit a lower corrosion current density by about one order of magnitude and a wider passive region than 316 L steel in phosphate buffer solution（PBS, pH 7.4）. The combination of the optimized composition with high deformation ability, low Young＇s modulus, and excellent corrosion resistance properties indicates that this kind of BMG is promising for biomedical applications.

Effect of Isobutyl-triethoxy-silane Penetrative Protective Agent on the Carbonation Resistance of Concrete

Effect of isobutyl-triethoxy-silane penetrative protective agent on the carbonation resistance of the concrete was studied.The concrete specimens for the 28 d accelerated carbonation process were manufactured with w/c of 0.49 and 0.64,both in the presence and absence of silane and mineral admixture.The penetration of isobutyl-triethoxy-silane and the carbonation of concrete were investigated by penetration depth,carbonation depth,XRD,SEM,and pore size distribution.The results showed that concrete compactness played an important role in the silane penetration and carbonation resistance.Penetration depth of silane-treated concrete mainly depended on the compactness of the concrete,and could not remarkably change through the accelerated carbonation process.In the accelerated carbonation process,penetrative protective agent improved the carbonation resistance of the higher compactness concretes but accelerated the carbonization process of the lower compactness concretes.As penetrative protective agent penetrated along the external connectivity pores into concrete not filling the entire surface area,the inorganic film could not fully protect the Ca（OH）_2 phase from carbonation.After 28 d accelerated carbonation,fibrous hydration products disappeared and the surface holes decreased.Due to the formation of carbonized products,the porosity of the concrete surface decreased,especially in high-strength concrete.

A Monte Carlo Simulation of Radiation Damage of SiC and Nb Using JA-IPU Code

MC （Monte Carlo） simulation code, JA-IPU is used to study radiation damage of SiC irradiated to spallation neutron and AmBe neutron spectra. The code is based on the major physical processes of radiation damage on incorporation of atomic collision cascade and limited to 10 MeV neutron energy. A phenomenological relation for radiation swelling is also derived. Based on the calculation of swelling, DPA （displacement per atom）, defect production efficiency and effective threshold energy, Efff from the data of MC simulation, SiC is inferred to be a highly radiation resistant material when compared with Nb and Ni metals which are used in composition of several reactor steels. Experimental results of hill-hock density measured using AFM （atomic force microscopy）, also confirm radiation resistant behavior of SiC.

Information for Authors

Should be of 100-200 words on page one, and includes aim, methods, results, and conclusions.

Future for inertial-fusion energy in Europe:a roadmap

The recent achievement of fusion ignition with laser-driven technologies at the National Ignition Facility sets a historic accomplishment in fusion energy research.This accomplishment paves the way for using laser inertial fusion as a viable approach for future energy production.Europe has a unique opportunity to empower research in this field internationally,and the scientific community is eager to engage in this journey.We propose establishing a European programme on inertial-fusion energy with the mission to demonstrate laser-driven ignition in the direct-drive scheme and to develop pathway technologies for the commercial fusion reactor.The proposed roadmap is based on four complementary axes:(ⅰ)the physics of laser-plasma interaction and burning plasmas;(ⅱ)high-energy high repetition rate laser technology;(ⅲ)fusion reactor technology and materials;and(ⅳ)reinforcement of the laser fusion community by international education and training programmes.We foresee collaboration with universities,research centres and industry and establishing joint activities with the private sector involved in laser fusion.This project aims to stimulate a broad range of high-profile industrial developments in laser,plasma and radiation technologies along with the expected high-level socio-economic impact.

A perspective on general direction and challenges facing antimicrobial peptides

The emergence of drug resistant bacterium threatens the global public healthcare systems.The urgent need to obtain new antimicrobials has driven antimicrobial peptides（AMPs） research into spotlight.Here we give a brief introduction of the recent progress of AMPs regarding their structures,properties,production and modification,and antimicrobial mechanism.Thereby,this review will give an insight into the trends and challenges facing on this particular kind of antimicrobial materials.