Enhanced resonance frequency in Co2FeAl thin film with different thicknesses grown on flexible graphene substrate

The flexible materials exhibit more favorable properties than most rigid substrates in flexibility,weight saving,mechanical reliability,and excellent environmental toughness.Particularly,flexible graphene film with unique mechanical properties was extensively explored in high frequency devices.Herein,we report the characteristics of structure and magnetic properties at high frequency of Co2FeAl thin film with different thicknesses grown on flexible graphene substrate at room temperature.The exciting finding for the columnar structure of Co2FeAl thin film lays the foundation for excellent high frequency property of Co2FeAl/flexible graphene structure.In-plane magnetic anisotropy field varying with increasing thickness of Co2FeAl thin film can be obtained by measurement of ferromagnetic resonance,which can be ascribed to the enhancement of crystallinity and the increase of grain size.Meanwhile,the resonance frequency which can be achieved by the measurement of vector network analyzer with the microstrip method increases with increasing thickness of Co2FeAl thin film.Moreover,in our case with graphene film,the resonance magnetic field is quite stable though folded for twenty cycles,which demonstrates that good flexibility of graphene film and the stability of high frequency magnetic property of Co2FeAl thin film grown on flexible graphene substrate.These results are promising for the design of microwave devices and wireless communication equipment.

Modal Frequency Prediction of Chladni Patterns Using Machine Learning

The introduction of machine learning (ML) in the research domain is a new era technique. The machine learning algorithm is developed for frequency predication of patterns that are formed on the Chladni plate and focused on the application of machine learning algorithms in image processing. In the Chladni plate, nodes and antinodes are demonstrated at various excited frequencies. Sand on the plate creates specific patterns when it is excited by vibrations from a mechanical oscillator. In the experimental setup, a rectangular aluminum plate of 16 cm x 16 cm and 0.61 mm thickness was placed over the mechanical oscillator, which was driven by a sine wave signal generator. 14 Chladni patterns are obtained on a Chladni plate and validation is done with modal analysis in Ansys. For machine learning, a large number of data sets are required, as captured around 200 photos of each modal frequency and around 3000 photos with a camera of all 14 Chladni patterns for supervised learning. The current model is written in Python language and model has one convolution layer. The main modules used in this are Tensor Flow Keras, NumPy, CV2 and Maxpooling. The fed reference data is taken for 14 frequencies between 330 Hz to 3910 Hz. In the model, all the images are converted to grayscale and canny edge detected. All patterns of frequencies have an almost 80% - 99% correlation with test sample experimental data. This approach is to form a directory of Chladni patterns for future reference purpose in real-life application. A machine learning algorithm can predict the resonant frequency based on the patterns formed on the Chladni plate.

Small-current grounding fault location method based on transient main resonance frequency analysis

The small-current grounding fault in distribution network is hard to be located because of its weak fault features.To accurately locate the faults,the transient process is analyzed in this paper.Through the study we take that the main resonant frequency and its corresponding component is related to the fault distance.Based on this,a fault location method based on double-end wavelet energy ratio at the scale corresponding to the main resonant frequency is proposed.And back propagation neural network(BPNN)is selected to fit the non-linear relationship between the wavelet energy ratio and fault distance.The performance of this proposed method has been verified in different scenarios of a simulation model in PSCAD/EMTDC.

Diffusion Coefficient at Resonance Frequency as Applied to n+/p/p+ Silicon Solar Cell Optimum Base Thickness Determination

The modelling and determination of the geometric parameters of a solar cell are important data, which influence the evaluation of its performance under specific operating conditions, as well as its industrial development for a low cost. In this work, an n+/p/p+ crystalline silicon solar cell is studied under monochromatic illumination in modulation and placed in a constant magnetic field. The minority carriers’ diffusion coefficient (D(ω, B), in the (p) base leads to maximum values (Dmax) at resonance frequencies (ωr). These values are used in expressions of AC minority carriers recombination velocity (Sb(Dmax, H)) in the rear of the base, to extract the optimum thickness while solar cell is subjected to these specific conditions. Optimum thickness modelling relationships, depending respectively on Dmax, ωr and B, are then established, and will be data for industrial development of low-cost solar cells for specific use.

Ultrasonic Pulse Signal Resonance Features in Layered CFRP Within Voids

The ultrasonic pulse signal resonance features in layered carbon fiber reinforced plastic（CFRP） within voids were researched. The frequency domain model of acoustic wave propagation in multilayered medium was established. Then the reflection coefficient of multilayered CFRP within voids was numerically calculated. The results are as follows. When the CFRP laminate is tested by ultrasonic whose center frequency is close to the CFRP inherent resonant frequency, the ultrasonic may generate resonance phenomenon in CFRP. If CFRP contains evenly distributed voids, the frequency of resonant signal and its amplitude all decrease with the increase of porosity. For the thick section CFRP within local concentrated voids, the local concentrated voids near testing surface will cause signal frequency reduction and the decrease of its amplitude. But the voids which exist in layers far away from testing surface almost have no influence on signal resonance. The ultrasonic pulse echo testing was conducted for thick section CFRP specimen. The analysis results of testing signals were in accordance with the results of the numerical calculation, showing that the reflection coefficient frequency response model can effectively explain the ultrasonic resonance phenomenon in layered CFRP within voids.

Influence of surface micro-beams with large deflection on the resonance frequency of a quartz crystal resonator in thickness-shear mode vibrations

We study the dynamic behavior of a quartz crystal resonator （QCR） in thickness-shear vibrations with the upper surface covered by an array of micro-beams （MBs） under large deflection. Through taking into account the continuous conditions of shear force and bending moment at the interface of MBs/resonator, dependences of frequency shift of the compound QCR system versus material parameter and geometrical parameter are illustrated in detail for nonlinear and linear vibrations. It is found that the frequency shift produces a little right （left） translation for increasing elastic modulus （length/radius ratio） of MBs. Moreover, the frequency right （left） translation distance caused by nonlinear deformation becomes more serious in the second-order mode than in the first-order one,

Analysis of iris-loaded resonance cavity in miniaturized maser

The size reduction of atomic clocks is a long-standing research issue.Many atomic clocks such as passive hydrogen masers(PHMs)and compact rubidium masers(CRMs)use iris-loaded resonance cavities(IRCs)as their microwave cavities because they can dramatically reduce the radical sizes of the atomic clocks.In this paper,the electromagnetic characteristic of the IRC is investigated by a theoretical model based on electromagnetic field theory.The formulas to calculate the resonance frequency,quality factor,and magnetic energy filling factor are presented.The relationship between the IRC structure and its electromagnetic characteristic is clarified.The theoretical calculation results accord well with the electromagnetic software simulations and experimental results.The results in this paper should be helpful in understanding the physical mechanism of the IRC and designing the atomic clocks.

Resonant frequencies of massless scalar field in rotating black-brane spacetime

This paper investigates the resonant frequencies of the massless scalar field in the near extremal Kerr-like black-brane spacetime. It is shown that the different angular quantum number will present different resonant frequencies. It is also shown that the real part of the resonant frequencies increases as the compact dimensions parameter μi increases, but the magnitude of the imaginary part decreases as μi increases.

Tunable characteristics of bending resonance frequency in magnetoelectric laminated composites

As the magnetoelectric （ME） effect in piezoelectric/magnetostrictive laminated composites is mediated by mechanical deformation, the ME effect is significantly enhanced in the vicinity of resonance frequency. The bending resonance frequency （fr） of bilayered Terfenol-D/PZT （MP） laminated composites is studied, and our analysis predicts that （i） the bending resonance frequency of an MP laminated composite can be tuned by an applied dc magnetic bias （Hdc） due to the E effect; （ii） the bending resonance frequency of the MP laminated composite can be controlled by incorporating FeCuNbSiB layers with different thicknesses. The experimental results show that with H dc increasing from 0 Oe （1 Oe=79.5775 A/m） to 700 Oe, the bending resonance frequency can be shifted in a range of 32.68 kHz≤fr≤33.96 kHz. In addition, with the thickness of the FeCuNbSiB layer increasing from 0 μm to 90 μm, the bending resonance frequency of the MP laminated composite gradually increases from 33.66 kHz to 39.18 kHz. This study offers a method of adjusting the strength of dc magnetic bias or the thicknesses of the FeCuNbSiB layer to tune the bending resonance frequency for ME composite, which plays a guiding role in the ME composite design for real applications.

ANALYSIS OF PIEZOELECTRIC ENERGY HARVESTING DEVICE WITH ADJUSTABLE RESONANCE FREQUENCY

This paper presents an analytic method that adjusts resonance frequency of a piezoelectric vibration energy harvester. A mathematical model that estimates resonance frequency of cantilever is also proposed. Through moving an attached mass and changing its weight on the cantilever beam, resonance frequency of adopted piezoelectric device can be adjusted to match the frequency of ambient vibration sources, which is critical in order to harvest maximum amount of energy. The theoretical results are validated by experiments that move different masses along experimental cantilever beams. The results demonstrate that resonance frequency can be adjusted by an attached mass located at different positions on the cantilever beam. Different combinations of operational conditions that harvest maximum amount of energy are also discussed in this paper.

Electromagnetic Resonance of Astigmatic Gaussian Beam to the High Frequency Gravitational Waves

The high frequency gravitational waves （around lOS-lO12 Hz） could interact with a specially designed electro- magnetic resonance system. It is found that the power of transverse perturbative photon flux （PPF） of an electromagnetic resonance system can be improved significantly by virtue of an astigmatic Caussian beam. Cor- respondingly the signal-to-noise ratio （SNR） would also be improved. When the eccentric ratio of waist satisfying w0x ： w0y 〉 1, the peak value of signal photon flux could be raised by 2-4 times with typical systematic parameters, while the background photon flux would be depressed. Therefore, the ratio of transverse PPF to background photon flux （i.e., SNR） can be further improved 3-8 times with dimensionless amplitude of relic gravitational wave ht = 10-36.

A Method for Measuring LC Resonance Frequency by Impulse Response

LC circuit resonance frequency measurement often requires the use of professional analysis instruments such as LCR meters,vector network analyzers,but currently such instruments on the market are expensive,and it is difficult for non-professional institute personnel to access.Here comes unnecessary trouble.In view of this situation,a test method for measuring the resonance frequency using only a digital storage oscilloscope is proposed.Using the impulse signal to obtain the system response,the response waveform period can be observed through the oscilloscope.

Theoretical study on dynamic effective electroelastic properties of random piezoelectric composites with aligned inhomogeneities

The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutions can be reduced to the ones of an elastodynamic problem.Based on the effective medium method,these closedform solutions can be used to establish the self-consistent equations about the frequencydependent effective parameters,which can be numerically solved by iteration.Theoretical predictions are compared with the experimental results,and good agreement can be found.Furthermore,the analyses on the effects of microstructure and wavelength on the effective properties,resonance frequencies,and attenuation are also presented,which may provide some guidance for the microstructure design and analysis of piezoelectric composites.

Vibration of a Two-Layer“Metal+PZT”Plate Contacting with Viscous Fluid

The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.

Detection of Frost-Resistance Property of Large-Size Concrete Based on Impact-Echo Method

The dynamic elasticity modulus(Ed)is the most commonly used indexes for nondestructive testing to represent the internal damage of hydraulic concrete.Samples with a specific size is required when the transverse resonance method was used to detect the Ed,resulting in a limitation for field tests.The impact-echo method can make up defects of traditional detection methods for frost-resistance testing,such as the evaluation via the loss of mass or strength.The feasibility of the impact-echo method to obtain the relative Ed is explored to detect the frost-resistance property of large-volume hydraulic concretes on site.Results show that the impact-echo method can replace the traditional resonance frequency method to evaluate the frost resistance of concrete,and has advantages of high accuracy,easy to operate,and not affecting by the aggregate size and size effect of samples.The dynamic elastic modulus of concrete detected by the impact-echo method has little difference with that obtained by the traditional resonance method.The one-dimensional elastic wave velocity of concrete has a good linear correlation with the transverse resonance frequency.The freeze-thaw damage occurred from the surface to the inner layer,and the surface is expected to be the most vulnerable part for the freeze-thaw damage.It is expected to monitor and track the degradation of the frost resistance of an actual structure by frequently detecting the P-wave velocity on site,which avoids coring again.

Simulation Study of CMUT for Pressure Sensing Applications

Capacitive micromechanical ultrasonic transducers(CMUTs)have been widely studied because they can be used as substitutes for piezoelectric ultrasonic transducers in imaging applications.However,it is unclear whether and how CMUTs can be developed for sensors incorporating other functions.For instance,researchers have proposed the use of CMUTs for pressure sensing,but fundamental and practical application issues remain unsolved.This study explored ways in which a pressure sensor can be properly developed based on a CMUT prototype using a simulation approach.A three-dimensional finite element model of CMUTs was designed using the COMSOL Multiphysics software by combining the working principle of CMUTs with pressure sensing characteristics in which the resonance frequency of the CMUT cell shifts accordingly when it is subjected to an external pressure.Simultaneously,when subjected to pressure,the CMUT membrane deforms,thus the pressure can be reflected by the change in the capacitance.

基于互补分裂谐振环的十字缝隙贴片天线

A compact patch antenna is designed, which is with structures of cross-shape slot, Complementary Split Ring Resonator(CSRR), and loaded transmission line. To implement the compactness in size, these structures are etched on the ground plane, then the input impedance has been improved. The CSRR is employed to improve impedance matching between the source and radiation patch, and the cross-shape slot on the radiation patch is utilized to increase the bandwidth. The design is validated by comparison of realistic field simulation with measurement results of an antenna prototype. The presented antenna is much smaller in size than conventional antennas with CSRR, showing good performances at the resonant frequency. The experimental results accord well with simulated results.

Influence of Phosphorus Content and Magnetic Annealing on Soft Magnetic Properties of Electrodeposited Amorphous FeMnP Alloy Films

In this work, we investigated the influence of phosphorus and magnetic anneal on the soft magnetic properties of electrodeposited FeMnP alloy films prepared by changing sodium hypophosphite concentrations. X-ray diffraction radiation patterns showed an amorphous structure of electrodeposited alloy films. The saturation magnetization and coercivity value decreased from 586 emu/cc to 346 emu/cc, and 52 Oe to 18 Oe, with the P content increased, respectively. The absorption resonance peak became broad as the P content increased, and the natural resonance frequency decreased from 1.8 GHz to 0.6 GHz, with the P content increasing. Magnetic annealing of samples reduced the magnetic damping, and natural resonance frequency increased by about 1.8 GHz and 3.5 GHz for the sample with lower and higher P content. The film structure with lower P content changed at 300˚C, while the structure remains unchanged for the films with higher P content. Thus, the crystallization temperature could depend on the P content in the film. FeMnP alloy films could be used in high-frequency devices.

Time-Fractal Modulation—Possible Modulation Effects in Human Therapy

The malignant processes deviate from the healthy homeostatic control, and various “tricks” enable malignant cells to avoid the healthy regulation. Consequently, the malignant structures miss the apoptosis and proliferate without restriction, and without the formation of communication networks in the newly formed cells. The modulation supports the homeostatic control to rearrange the health regulation processes in various ways. The modulation acts with stochastic processes, using stochastic resonances for molecular excitations, supporting the regulative enzymatic processes. The number of stochastic resonant frequencies is as many as the number of enzymatic reactions. The malignant cells differ structurally and dynamically in their connections and interactions from their healthy host tissues. The radiofrequency carrier is modulated with an appropriate time-fractal (1/f) noise to select the autonomic cancer-cells, destroy them, or force the precancerous, semi-individual cells to participate in the networking connections. The modulation in this way limits the cellular autonomy of malignant cells and boosts the healthy control. The resonant energy triggers apoptotic processes and helps immunogenic actions deliver extracellular genetic information for antigen-presentation. The modulation is applied in clinical practice. The therapy (modulated electro-hyperthermia, mEHT) is intensively used in oncology in complementary applications and for palliative stages, and occasionally even as a monotherapy.

Ambient noise as the new source for urban engineering seismology and earthquake engineering: a case study from Beijing metropolitan area

In highly populated urban centers, traditional seismic survey sources can no longer be properly applied due to restrictions in modern civilian life styles. The ambient vibration noise, including both microseisms and microtremor, though are generally weak but available anywhere and anytime, can be an ideal supplementary source for conducting seismic surveys for engineering seismology and earthquake engineering. This is funda- mentally supported by advanced digital signal processing techniques for effectively extracting the useful information out from the noise. Thus, it can be essentially regarded as a passive seismic method. In this paper we first make a brief survey of the ambient vibration noise, followed by a quick summary of digital signal processing for passive seismic surveys. Then the applications of ambient noise in engi- neering seismology and earthquake engineering for urban settings are illustrated with examples from Beijing metro- politan area. For engineering seismology the example is the assessment of site effect in a large area via microtremor observations. For earthquake engineering the example is for structural characterization of a typical reinforced con- crete high-rise building using background vibration noise.By showing these examples we argue that the ambient noise can be treated as a new source that is economical, practical, and particularly valuable to engineering seis- mology and earthquake engineering projects for seismic hazard mitigation in urban areas.