Analyzing the response of a contactless conductivity detector in capillary electrophoresis by a resonant method

We report a resonant method to measure the wall capacitance（C_w） and solution resistance（R_S） in a capacitively coupled contactless conductivity detector（C^4D）.Under the typical operating conditions in capillary electrophoresis（I.D.50μm,O.D. 360μm,electrode length of 4 mm,electrode gap of 1 mm,frequency of 200 kHz）,the values of C_w measured in 1 and 20 mmol/L NaCl solutions are 2.8 and 32 fF,which are only 1.1%and 12%of prediction by the equation in references,respectively.The value of R_S is less than the prediction in solutions withκ〈0.02 S/m.The response current of C^4D is due to the change in C_w because the total impedance of a C^4D is composed mainly by the impedance from C_w.

Experimental and Numerical Study of Structural Identification Using Non-Linear Resonant Decay Method

One of the practical approaches in identifying structures is the non-linear resonant decay method which identifies a non-linear dynamic system utilizing a model based on linear modal space containing the underlying linear system and a small number of extra terms that exhibit the non-linear effects.In this paper,the method is illustrated in a simulated system and an experimental structure.The main objective of the non-linear resonant decay method is to identify the non-linear dynamic systems based on the use of a multi-shaker excitation using appropriated excitation which is obtained from the force appropriation approach.The experimental application of the method is indicated to provide suitable estimates of modal parameters for the identification of non-linear models of structures.

Application of the body of revolution finite-element method in a re-entrant cavity for fast and accurate dielectric parameter measurements

In dielectrometry,traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities.For a special kind of structure(a rotating resonant cavity),the body of revolution finite-element method(BOR-FEM)is employed to calculate the resonant parameters and dielectric parameters.In this paper,several typical resonant structures are selected for analysis and verification.Compared with the resonance parameter values in the literature and the simulation results of commercial software,the error of the BOR-FEM calculation is less than 0.9%and a single solution time is less than 1 s.Reentrant coaxial resonant cavities loaded with dielectric materials are analyzed using this method and compared with simulation results,showing good agreement.Finally,in this paper,the established BOR-FEM method is successfully applied with a machined cavity for the accurate measurement of the complex dielectric constant of dielectric materials.The test specimens were machined from polytetrafluoroethylene,fused silica and Al_(2)O_(3),and the test results showed good agreement with the literature reference values.

A SIMPLE METHOD TO CALCULATE RESONANCE ENERGY

A very simple method to calculate resonance energies of conjugated hydrocarbons by counting carbon numbers was introduced.

Comparing High-resistance Grounding Method with Resonance Grounding Method for Large Generators

For large generators, the problem of high-resistance grounding method and the advantages of resonance, grounding method are discussed in detail, and an overall comparison is given in this paper. It is recommended that the latter should be adopted so as to increase the operation reliability of large generators and power systems.

ANALYSIS OF HUMAN PLACENTA BY ^(31)P NUCLEAR MAGNETIC RESONANCE AND THIN-LAYER CHROMATOGRAPHY SCANNING COMBINED WITH THE CORRECTIVE METHOD OF ABSORBANCE PROPORTIONAL COEFFICIENT

Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.

Developing Reliable Digital Healthcare Service Using Semi-Quantitative Functional Resonance Analysis

Since entering the era of Industry 4.0,the concept of Healthcare 4.0 has also been put forward and explored by researchers.How to use Information Technology(IT)to better serve people’s healthcare is one of the most featured emerging directions in the academic circle.An important field of Healthcare 4.0 research is the reliability engineering of healthcare service.Because healthcare systems often affect the health and even life of their users,developers must be very cautious in the design,development,and operation of these healthcare systems and services.The problems to be solved include the reliability of business process,system functions,and personal healthcare data.The Functional Resonance Analysis Method(FRAM)has been applied in reliability engineering for safety-critical systems in available studies,using both qualitative and quantitative approaches.However,the method has not been applied in the field of digital healthcare services development.Therefore,to narrow the gap,we present in this paper a semi-quantitative functional resonance analysis method to develop reliable healthcare services for diabetics.Moreover,this paper has tried to improve the reliability design of the service-oriented architecture(SOA)of traditional insulin pump therapy by system thinking.

Measurement of the Dielectric Properties of Volcanic Scoria and Basalt at 9370 MHz

Dielectric data for volcanic scoria and basalt on the earth at microwave frequency are extremely sparse, and also crucial for volcanic terrains imaging, and development. In consideration of their similarity to lunar regolith (soils and rocks) in chemical and mineral composition, the dielectric data is significative for passive and active microwave remote sensing on the Moon. This study provides the data about the dielectric properties of three kinds of scoria and two kinds of basalt in China. The method put forward in this paper is also applicable for measuring the dielectric properties of dry rocks and other granular ground materials with low complex dielectric constants. Firstly, the authors measured the e' and tanδ values of strip specimens prepared from the mixture of scoria or basalt powder and polythene with the resonant cavity perturbation method at 9370 MHz. Secondly, from the ε' and tanδ values of the mixture, the ε' s and tanδ s values of solid scoria and basalt were calculated using Lichtenecker's mixture formulae. Finally, the effective complex dielectric constants, ε' e and tanδ e , of scoria at different bulk densities were calculated. The results have shown that the ε' s and tanδ s values of all solid basaltic materials measured (both solid basaltic scoria or basalt) are approximately 7 and 0.05, respectively. With increasing bulk density of scoria, the ε' c and tanδ e values of scoria increase significantly.

Resonance vibration approach in soil densification:laboratory experiences and numerical simulation

This paper describes the improvement effect and mechanism of strengthening a liquefied sand foundation using the cross-vibration wing resonance method,through an indoor model test and numerical simulation.The results obtained from the model test showed that a vertical drainage tube was formed during vibration compaction,and finally a crater with a depth of 40 mm and a radius of 150 mm was formed with sloping sides.The sand layer obtained a good improvement effect after resonance vibration,especially in the middle-lower sand deposit.The variation in excess pore water pressure showed different behavior in three stages of the vibration process,and the value after treatment was less than before with a decrease of 18.81%.The vibration energy in the horizontal direction gradually decreased to zero,however the absorption of vibration energy of the soil presented obvious nonuniformity along the depth direction.The results of the numerical simulation were similar to the model test results,including the scope and variation of pore water pressure,and the ground settlement after treatment.

Experimental Analysis of Dynamic Stiffness Coefficient of the New Mn-Cu Alloy Annular Parts

Based on excitation-resonance mass testing principle, a proper experiment testing system is designed for annular parts. The dynamics characters of the axis sleeve, which is made of a new Mn-Cu alloy and used as a vibration reductor in high acceleration rotary testing machine for fusee, is investigated. The relationship between stiffness coefficient and utilizing frequency is obtained, and the simplified dynamics model of crystal is established From the viewpoint of crystal microstructure of the Mn-Cu alloy, the experiment result is analyzed by the viscoelastic theory, and the characters of stress and strain in the condition of high frequency are discussed. The results indicate that the Mn-Cu alloy annular parts are fit to be used on the high accleration rotary testing machine for fusee.

A flextensional transducer and its algorithmic method of resonant frequency

A flextensional transducer with an Omega shape and its algorithmic method of the resonant frequency and the shape functions are suggested. The Omega transducer is separated into four parts treated respectively as a thin shell of revolution and the theories of thin shells of revolution and piezoelectricity are used to obtain the energy functional of each part so that the sum of the energy functionals of the four parts is the energy functional of the whole Omega transducer. By substituting the shape functions with undetermined coefi3cients and the geo- metrical boundary conditions into the energy functional of the Omega transducer, the resonant frequency of the Omega transducer is firstly determined with the Rayleigh-Ritz method. With the gotten resonant frequency, the constant coefficients of the shape functions are following solved through the Rayleigh-Ritz partial differential equations and the geometrical boundary condition equations. The solving method of the resonant frequency and the shape functions is also extended to the cymbal transducer. Such an analytical method is verified to be feasible by the results of the finite element analysis and experiments. The research indicates that （1） The radial vibration of the piezoelectric ceramic is in phase with the longitudinal vibration of the top of metal cap, and it cut down the reversed phase component in the sound field. The Omega transducer can be a low frequency transducer. （2） The determination method of the resonant frequency and the shape functions give a solution to the optimum designs of the Omega transducer and the cymbal transducer. （3） The determination method of the resonant fi＇equency and the shape functions can also be used in other flextensional transducers or other structures which are composed of thin shells of revolution, so it is universal.

Effects of Adhesive Characteristic on the Test Results of Damping Material's DMP

In the measurement of damping material's dynamic mechanical performance(DMP) using flexural resonating cantilever beam method,the specimen's adhesive characteristic influences the test precision and accuracy. Taking its effect into account,the improved measurement equations based on the resonance method are presented. The simulated results show that,for the sake of weakening the adhesive's influence on the measured results,the adhesive should be spreaded as thin as possible when specimen is prepared,the adhesive's density and loss factor should be selected as small as possible also,and its Young's modulus should be selected according to the damping material being measured;the same adhesion condition effects differently on the test results of different damping materials,i.e. the error due to the adhesive is more inconspicuous if the damping layer has bigger thickness,modulus,loss factor and a certain density according to the damping material being measured. These conclusions provide theoretical basis for selecting adhesive,improving adhesion technology,and designing specimen.

CHAOTIC BEHAVIOUR OF FORCED OSCILLATOR CONTAINING A SQUARE NONLINEAR TERM ON PRINCIPAL RESONANCE CURVES

In this paper based on [1]we go further into the study of chaotic behaviour of theforced oscillator containing a square nonlinear term by the methods of multiple scalesand numerical simulation. Relation between the chaotic domain and principal resonance curve is discussed. By analyzing the stability of principal resonance curve weinfer that chaotic motion would occur near the frequency at which the principalresonance curve has vertical tangent.Results of numerical simulation confirm thisinference.Thus we offer an effective way to seek the chaotic motion of the systems which are hard to he investigated by Melnikoy method.

STUDY ON LOWER ORDER HARMONIC RESONANCE OF ELASTIC LINKAGES──SUPER HARMONIC RESONANCES

The superharmonic resonances of elastic linkages are studied by using the method of multiple scales under the excitation of its inertial foree。 The analyses demonstrate that the superharmonic resonances caused by the quadratic and cubic nonlinearities due to large elastic deformations of the flexible links and multi-frequencies of the inertial force of linkages are the reason to produce the critical speeds. The results of explaining of the lower order harmonic reso- nances by“1/n' method are verified theoretically。

Method for eliminating mismatching error in monolithic triaxial ring resonators

Several results on optical-axis perturbation and elimination of the mismatching error C of a monolithic triaxial ring resonator （MTRR） are reported. Based on the augmented 5×5 ray matrix method, by simultaneously considering axial displacement of a mirror and the misalignments in three planar square ring resonators of a MTRR, the rules of optical-axis perturbation are obtained. The mismatching error C of the MTRR is eliminated. The results obtained are important for cavity design, as well as in the improvement and alignment of MTRR.

Application of coupled equation method on resonance processes of atomic lithium

The coupled equation method （CEM） has been applied to investigating the resonance structures for the ground state 1s^22s^ 2S of the neutral lithium from the first threshold up to 64.5 eV. Resonance structures of atomic lithium due to single excitations of the ls and 2s electrons are studied by infinite-order calculations in detail. The effect of spin-orbit splitting is also included for some of the low-lying ls2snp（↑↓） resonance, and the influence of the interference between 1s^2s^3 Snp .↓ and 1s2s^ 1 Snp ↑ states on the resonance structure has been confirmed theoretically. The results show that the presented technique can give the reasonable resonance structures very well in photoionization processes.

Data signal processing via manchester coding-decoding method using chaotic signals generated by PANDA ring resonator

We investigate the nonlinear behaviors of light recognized as chaos during the propagation of Gaussian laser beam inside a nonlinear polarization maintaining and absorption reducing （PANDA） ring resonator system. It aims to generate the nonlinear behavior of light to obtain data in binary logic codes for transmission in fiber optics communication. Effective parameters, such as refractive indices of a silicon waveguide, coupling coefficients （~）, and ring radius ring （R）, can be properly selected to operate the nonlinear behavior. Therefore, the binary coded data generated by the PANDA ring resonator system can be decoded and converted to Manchester codes, where the decoding process of the transmitted codes occurs at the end of the transmission link. The simulation results show that the original codes can be recovered with a high security of signal transmission using the Manchester method.

Ultra-wide tuning single channel filter based on one-dimensional photonic crystal with an air cavity

By inserting an air cavity into a one-dimensional photonic crystal of LiF/GaSb, a tunable filter covering the whole visible range is proposed. Following consideration of the dispersion of the materials, through modulating the thickness of the air cavity, we demonstrate that a single resonant peak can shift from 416.1 to 667.3 nm in the band gap at normal incidence by means of the transfer matrix method. The research also shows that the transmittance of the channel can be maximized when the number of periodic Li F/Ga Sb layers on one side of the air defect layer is equal to that of the other side. When adding a period to both sides respectively, the full width at half maximum of the defect mode is reduced by one order of magnitude. This structure will provide a promising approach to fabricate practical tunable filters in the visible region with ultra-wide tuning range.

Effect of confined one-gluon-exchange potential and instanton-induced interaction on nucleon–nucleon interaction

The effect of confined one-gluon-exchange potential and instanton-induced interaction potential in the singlet(1S0)and triplet(3S1)channels for nucleon–nucleon interaction has been investigated in the framework of the relativistic harmonic model using the resonating group method in the adiabatic limit with the Born–Oppenheimer approximation.The contributions of the different components of the interaction potentials have been analyzed.

D^0D^^0＊(D^0D^0＊) system in QCD-improved many body potential

For a system of current interest（composed of charm, anticharm and a pair of light quarks）, we show trends in phenomenological implications of QCD-based improvements to a simple quark model treatment. We employ a resonating group method to render this difficult four-body problem manageable. We use a quadratic confinement so as to be able to improve beyond the Born approximation. We report the position of the pole corresponding to the D^0D^0＊ molecule for the best fit of a model parameter to the relevant QCD simulations. We point out the interesting possibility that the pole can be shifted to 3872 Me V by introducing another parameter I0 that changes the strength of the interaction in this one component of X（3872）. The revised value of this second parameter can guide future trends in modeling of the full exotic meson X（3872）. We also report the changes with I_0 in the S-wave spin averaged cross sections for D^0D^0＊-→ωJ/ψ and D^0D^0＊-→ρJ/ψ. These cross sections are important regarding the study of QGP（quark gluon plasma）.