In this presentation the feasibility and capability of fiber Bragg gratings （FBG） employed in bridge health monitoring are demonstrated on a real bridge. FBG＇ s wavelength shift depending on strain variance has bee...In this presentation the feasibility and capability of fiber Bragg gratings （FBG） employed in bridge health monitoring are demonstrated on a real bridge. FBG＇ s wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3 temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed, the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load, traffic load and temperature. The results show that the traffic fluxes, possible tatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.展开更多
A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical f...A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical fiber. Small changes in the refractive index of coating film greatly influence the power of evanescent fields, which modulate the transmission optical power in the waist region. The range of temperature measured is from -20℃ to 70 ℃. The results show that the temperature sensor has high temperature sensitivity （0.012 mW/℃） and good repeatability.展开更多
A universal spectral modulation sensor with low cost,stable,reliable and accurate performances is presented.The optical measuring device using a universal spectral modulation sensor is immune to change the intensities...A universal spectral modulation sensor with low cost,stable,reliable and accurate performances is presented.The optical measuring device using a universal spectral modulation sensor is immune to change the intensities of the light source and light transmission due to optical fiber bending and optical fiber connector loss.The spectral modulation sensor system can detect and measure various physical parameters such as pressure,temperature,gas density,and various chemical species.展开更多
Due to the benefits of the high sensitivity,real-time response,no labeling requirement,and good selectivity,fiber optic sensors based on surface plasmon resonance(SPR)have gained popularity in biochemical sensing in r...Due to the benefits of the high sensitivity,real-time response,no labeling requirement,and good selectivity,fiber optic sensors based on surface plasmon resonance(SPR)have gained popularity in biochemical sensing in recent years.The current research on such sensors is hot in enhancing sensitivity,improving detection accuracy,and achieving the detection of biochemical molecules.The goal of this work is to present a thorough overview of recent developments in the optical fiber SPR biosensor research.Firstly,it explores the basic principles and sensing structures of optical fiber SPR biosensors,focusing on four aspects.Subsequently,this paper introduces three fiber optic surface plasmon biosensors:SPR,localized surface plasmon resonance(LSPR),and long-range surface plasmon resonance(LRSPR).Each concept is explained from the perspective of the basic principles of fiber optic SPR biosensors.Furthermore,a classification of fiber optic SPR biosensors in health monitoring,food safety,environmental monitoring,marine detection,and other applications is introduced and analyzed.Eventually,this paper summarizes the current research directions of SPR biosensors.Meanwhile,it provides a prospective outlook on how fiber optic SPR sensors will develop in the future.展开更多
To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-typ...To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.展开更多
A new design of surface plasmon resonance(SPR)sensor employing circular-lattice holey fiber to achieve highsensitivity detection is proposed.The sensing performance of the proposed sensor is numerically investigated a...A new design of surface plasmon resonance(SPR)sensor employing circular-lattice holey fiber to achieve highsensitivity detection is proposed.The sensing performance of the proposed sensor is numerically investigated and the results indicate that our proposed SPR sensor can be applied to the near-mid infrared detection.Moreover,the maximum wavelength sensitivity of our proposed sensor can reach as high as 1.76×10^(4)nm/refractive index unit(RIU)and the maximum wavelength interrogation resolution can be up to 5.68×10^(-6)RIU when the refractive index(RI)of analyte lies in(1.31,1.36).Thanks to its excellent sensing performance,our proposed SPR sensor will have great potential applications for biological analytes detection,food safety control,bio-molecules detection and so on.展开更多
Surface plasmon resonance (SPR) sensors have grown in popularity owing to their sensitivity, precision, and capacity for a variety of applications, including detection, monitoring, and sensing, among others. Sensitivi...Surface plasmon resonance (SPR) sensors have grown in popularity owing to their sensitivity, precision, and capacity for a variety of applications, including detection, monitoring, and sensing, among others. Sensitivity and resolution are two areas where this technology has room for development. A plasmonic biosensor based on an asymmetric slotted PCF structure with extremely high sensitivity has been described and theoretically investigated. This high performance sensor is constructed and completely characterized using finite element method in COMSOL Multiphysics software environment. Sensitivity and resolution are analyzed as performance parameters for the proposed sensor. Numerical simulation exhibits the maximum wavelength-sensitivity of 1100 nm/RIU with 9.09 × 10<sup>-6</sup> RIU resolution in the broad measurement range of refractive index from 1.30 to 1.44. A polarization controller can be used to fine-tune this extremely sensitive and wide-ranging refractive index sensor to fulfil a variety of practical needs. This is performed with the consideration of the variation in the refractive index (RI) of the analyte channels. In comparison with earlier PCF-based sensors, the fiber design structure is basic, symmetrical, simple to produce, and cost-effective. Because of the asymmetric air holes and higher sensitivities of the refractive index detector, it is possible to identify biomolecules, biochemicals and other analytes.展开更多
The distributed optical fiber surface plasmon resonance(SPR)sensors have attracted wide attention in biosensing and chemical sensing applications.However,due to the limitation of their sensing structure,it is difficul...The distributed optical fiber surface plasmon resonance(SPR)sensors have attracted wide attention in biosensing and chemical sensing applications.However,due to the limitation of their sensing structure,it is difficult to adjust their res-onant wavelength and sensitivity.Here,novel and flexible cascaded helical-core fiber[HCF)SPR sensors are proposed theoretically and experimentally for distributed sensing applications.It is shown that the resonant wavelength and sensitivity of the sensors can be conveniently controlled by adjusting the twist pitch of the helical core.A high sensitivity of 11,180 nm/RIU for refractive-index measurement ranging from 1.355 to 1.365 is realized experimentally when the twist pitch of the helical core is 1.5 mm.It is worth noting that the sensitivity can be further improved by reducing the twist pitch.For example,the sensitivity of the sensor with a twist pitch of 1.4 mm can theoretically exceed 20,000 nm/RIU.This work opens up a new way to implement multi-parameter or distributed measurement,especially to establish sensing networks integrated in a single-core fiber or a multi-core fiber.展开更多
基金Sponsored by the National Natural Science Foundation of China (Grant No. 10402010).
文摘In this presentation the feasibility and capability of fiber Bragg gratings （FBG） employed in bridge health monitoring are demonstrated on a real bridge. FBG＇ s wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3 temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed, the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load, traffic load and temperature. The results show that the traffic fluxes, possible tatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.S30108)the Universities Foster Innovation Foundation Projects for Major Projects in Ministry of Education (Grant No.708041)
文摘A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical fiber. Small changes in the refractive index of coating film greatly influence the power of evanescent fields, which modulate the transmission optical power in the waist region. The range of temperature measured is from -20℃ to 70 ℃. The results show that the temperature sensor has high temperature sensitivity （0.012 mW/℃） and good repeatability.
文摘A universal spectral modulation sensor with low cost,stable,reliable and accurate performances is presented.The optical measuring device using a universal spectral modulation sensor is immune to change the intensities of the light source and light transmission due to optical fiber bending and optical fiber connector loss.The spectral modulation sensor system can detect and measure various physical parameters such as pressure,temperature,gas density,and various chemical species.
基金supported by the National Natural Science Foundation of China (Grant No.62073068)the Fundamental Research Funds for the Central Universities (Grant No.N2204019)+4 种基金the Applied Basic Research Program Projecttof Liaoning Province (Grant No.2023JH2/101300179)the Research Fund of State Key Laboratory of Synthetical Automation for Process Industries (Grant No.2018ZCX29)the Shenyang Science and Technology Plan Project (Grant No.23-407-3-01)the Hebei Natural Science Foundation (Grant No.F2020501040)the Natural Science Foundation of Shandong Province (Grant Nos.ZR2020MF108 and ZR2020MD058).
文摘Due to the benefits of the high sensitivity,real-time response,no labeling requirement,and good selectivity,fiber optic sensors based on surface plasmon resonance(SPR)have gained popularity in biochemical sensing in recent years.The current research on such sensors is hot in enhancing sensitivity,improving detection accuracy,and achieving the detection of biochemical molecules.The goal of this work is to present a thorough overview of recent developments in the optical fiber SPR biosensor research.Firstly,it explores the basic principles and sensing structures of optical fiber SPR biosensors,focusing on four aspects.Subsequently,this paper introduces three fiber optic surface plasmon biosensors:SPR,localized surface plasmon resonance(LSPR),and long-range surface plasmon resonance(LRSPR).Each concept is explained from the perspective of the basic principles of fiber optic SPR biosensors.Furthermore,a classification of fiber optic SPR biosensors in health monitoring,food safety,environmental monitoring,marine detection,and other applications is introduced and analyzed.Eventually,this paper summarizes the current research directions of SPR biosensors.Meanwhile,it provides a prospective outlook on how fiber optic SPR sensors will develop in the future.
基金supported by the National Natural Science Foundation of China (Grant No. 61705025)the Natural Science Foundation of Chongqing (Grant Nos. cstc2019jcyjmsxm X043 and cstc2018jcyj AX0817)+2 种基金the Fund from the Science and Technology Project Affiliated to the Education Department of Chongqing Municipality (Grant Nos. KJQN201801217, KJQN202001214, KJQN201901226, and KJ1710247)the Fund from Chongqing Key Laboratory of Geological Environment Monitoring and Disaster Early-Warning in Three Gorges Reservoir Area (Grant Nos. ZD2020A0103 and ZD2020A0102)the Fundamental Research Funds for Chongqing Three Gorges University of China (Grant No. 19ZDPY08)。
文摘To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.
基金supported by the National Natural Science Foundation of China(Grant No.61765003)the Scientific Research Foundation for the Wuyi University(Grant No.YJ202104)。
文摘A new design of surface plasmon resonance(SPR)sensor employing circular-lattice holey fiber to achieve highsensitivity detection is proposed.The sensing performance of the proposed sensor is numerically investigated and the results indicate that our proposed SPR sensor can be applied to the near-mid infrared detection.Moreover,the maximum wavelength sensitivity of our proposed sensor can reach as high as 1.76×10^(4)nm/refractive index unit(RIU)and the maximum wavelength interrogation resolution can be up to 5.68×10^(-6)RIU when the refractive index(RI)of analyte lies in(1.31,1.36).Thanks to its excellent sensing performance,our proposed SPR sensor will have great potential applications for biological analytes detection,food safety control,bio-molecules detection and so on.
文摘Surface plasmon resonance (SPR) sensors have grown in popularity owing to their sensitivity, precision, and capacity for a variety of applications, including detection, monitoring, and sensing, among others. Sensitivity and resolution are two areas where this technology has room for development. A plasmonic biosensor based on an asymmetric slotted PCF structure with extremely high sensitivity has been described and theoretically investigated. This high performance sensor is constructed and completely characterized using finite element method in COMSOL Multiphysics software environment. Sensitivity and resolution are analyzed as performance parameters for the proposed sensor. Numerical simulation exhibits the maximum wavelength-sensitivity of 1100 nm/RIU with 9.09 × 10<sup>-6</sup> RIU resolution in the broad measurement range of refractive index from 1.30 to 1.44. A polarization controller can be used to fine-tune this extremely sensitive and wide-ranging refractive index sensor to fulfil a variety of practical needs. This is performed with the consideration of the variation in the refractive index (RI) of the analyte channels. In comparison with earlier PCF-based sensors, the fiber design structure is basic, symmetrical, simple to produce, and cost-effective. Because of the asymmetric air holes and higher sensitivities of the refractive index detector, it is possible to identify biomolecules, biochemicals and other analytes.
基金supported by the National Key R&D Program of China (No. 2017YFB0405501)the National Natural Science Foundation of China (Nos. 61705050, 61675052, 61965005, 61975038, and 61827819)the Guangxi Project (Nos. 2018AD19081 and 2018AA20001)
文摘The distributed optical fiber surface plasmon resonance(SPR)sensors have attracted wide attention in biosensing and chemical sensing applications.However,due to the limitation of their sensing structure,it is difficult to adjust their res-onant wavelength and sensitivity.Here,novel and flexible cascaded helical-core fiber[HCF)SPR sensors are proposed theoretically and experimentally for distributed sensing applications.It is shown that the resonant wavelength and sensitivity of the sensors can be conveniently controlled by adjusting the twist pitch of the helical core.A high sensitivity of 11,180 nm/RIU for refractive-index measurement ranging from 1.355 to 1.365 is realized experimentally when the twist pitch of the helical core is 1.5 mm.It is worth noting that the sensitivity can be further improved by reducing the twist pitch.For example,the sensitivity of the sensor with a twist pitch of 1.4 mm can theoretically exceed 20,000 nm/RIU.This work opens up a new way to implement multi-parameter or distributed measurement,especially to establish sensing networks integrated in a single-core fiber or a multi-core fiber.
