AI(Artificial Intelligence)workloads are proliferating in modernreal-time systems.As the tasks of AI workloads fluctuate over time,resourceplanning policies used for traditional fixed real-time tasks should be reexami...AI(Artificial Intelligence)workloads are proliferating in modernreal-time systems.As the tasks of AI workloads fluctuate over time,resourceplanning policies used for traditional fixed real-time tasks should be reexamined.In particular,it is difficult to immediately handle changes inreal-time tasks without violating the deadline constraints.To cope with thissituation,this paper analyzes the task situations of AI workloads and findsthe following two observations.First,resource planning for AI workloadsis a complicated search problem that requires much time for optimization.Second,although the task set of an AI workload may change over time,thepossible combinations of the task sets are known in advance.Based on theseobservations,this paper proposes a new resource planning scheme for AIworkloads that supports the re-planning of resources.Instead of generatingresource plans on the fly,the proposed scheme pre-determines resourceplans for various combinations of tasks.Thus,in any case,the workload isimmediately executed according to the resource plan maintained.Specifically,the proposed scheme maintains an optimized CPU(Central Processing Unit)and memory resource plan using genetic algorithms and applies it as soonas the workload changes.The proposed scheme is implemented in the opensourcesimulator SimRTS for the validation of its effectiveness.Simulationexperiments show that the proposed scheme reduces the energy consumptionof CPU and memory by 45.5%on average without deadline misses.展开更多
Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient...Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient. One of the main problems in network-based manufacturing is the allocation of resources and the assignment of tasks rationally, according to flexible resource distribution. The mapping rules and relations between production techniques and resources are proposed, followed by the definition of the resource unit. Ultimately, the genetic programming method for the optimization of the manufacturing system is put forward. A set of software for the optimization system of simulation process using genetic programming techniques has been developed, and the problems of manufacturing resource planning in network-based manufacturing are solved with the simulation of optimizing methods by genetic programming. The optimum proposal of hardware planning, selection of company and scheduling will be obtained in theory to help company managers in scientific decision-making.展开更多
This paper generalizes the classic resource allocation problem to the resource planning and allocation problem, in which the resource itself is a decision variable and the cost of each activity is uncertain when the r...This paper generalizes the classic resource allocation problem to the resource planning and allocation problem, in which the resource itself is a decision variable and the cost of each activity is uncertain when the resource is determined. The authors formulate this problem as a two-stage stochastic programming. The authors first propose an efficient algorithm for the case with finite states. Then, a sudgradient method is proposed for the general case and it is shown that the simple algorithm for the unique state case can be used to compute the subgradient of the objective function. Numerical experiments are conducted to show the effectiveness of the model.展开更多
While the enterprise resource planning (ERP) systems become more and more complex, the traditional tools such as DCOM, CORBA or EJB encounter more difficulties than before especially when heterogenous and distributed ...While the enterprise resource planning (ERP) systems become more and more complex, the traditional tools such as DCOM, CORBA or EJB encounter more difficulties than before especially when heterogenous and distributed environment and multiple companies are involved. The newly born international specification SOAP brings a new solution to ERP because of its simplicity and high extensibility. This paper analyses the techniques to extend basic SOAP to implement ERP system. The techniques, including data envelope, dynamically and loosely coupled remote process calling (RPC), support to the multiple communication protocol, and security and performance improvement, greatly enhance the ability of basic SOAP and make it capable to accomplish the integration task in large scale ERP systems. All the techniques we discusse here are successfully utilized in the ERP system in the Three Gorge Cascade Dispatch Center of China Three Gorge Project Corporation.展开更多
Designed as a tool for business intelligence, resource planning is used to manage the essentials of a business by integrating processes into a single system. Enterprise Resource Planning (ERP) solutions ensure all the...Designed as a tool for business intelligence, resource planning is used to manage the essentials of a business by integrating processes into a single system. Enterprise Resource Planning (ERP) solutions ensure all the organizational, operational, and procedural structures interconnection, which can be both an advantage and a disadvantage, knowing that inefficiency within one structure will lead to inefficiency in others. The originality of the approach consists in the unitary analysis of all processes which shipbuilding involves (design;evaluation of ship construction possibilities;contracting of works;contracting of supply of materials and equipment;presentation of inspections for the completed works reception;delivery of the ship into operation). The systemic approach is a notable contribution by highlighting the input and output quantities for the analyzed processes. Also, where it was found relevant, the diagrams highlight the owners of the process and show the interconnectivity of the functional departments within a shipyard. Although it is obviously the expression of in-depth knowledge of the peculiarities of Romanian shipyards, the authors hope that the work can support any shipyard that may be interested in knowing these structures (as a logical scheme mandatory to design a custom ERP software system).展开更多
Procurement planning with discrete time varying demand is an important problem in Enterprise Resource Planning (ERP). It can be described using the non-analytic mathematical programming model proposed in this paper....Procurement planning with discrete time varying demand is an important problem in Enterprise Resource Planning (ERP). It can be described using the non-analytic mathematical programming model proposed in this paper. To solve the model we propose to use a fuzzy decision embedded genetic algorithm. The algorithm adopts an order strategy selection to simplify the original real optimization problem into binary ones. Then, a fuzzy decision quantification method is used to quantify experience from planning experts. Thus, decision rules can easily be embedded in the computation of genetic operations. This approach is applied to purchase planning problem in a practical machine tool works, where satisfactory results have been achieved.展开更多
This paper gives insight into the use of underground space in Helsinki,Finland.The city has an underground master plan(UMP) for its whole municipal area,not only for certain parts of the city.Further,the decision-maki...This paper gives insight into the use of underground space in Helsinki,Finland.The city has an underground master plan(UMP) for its whole municipal area,not only for certain parts of the city.Further,the decision-making history of the UMP is described step-by-step.Some examples of underground space use in other cities are also given.The focus of this paper is on the sustainability issues related to urban underground space use,including its contribution to an environmentally sustainable and aesthetically acceptable landscape,anticipated structural longevity and maintaining the opportunity for urban development by future generations.Underground planning enhances overall safety and economy efficiency.The need for underground space use in city areas has grown rapidly since the 21 st century;at the same time,the necessity to control construction work has also increased.The UMP of Helsinki reserves designated space for public and private utilities in various underground areas of bedrock over the long term.The plan also provides the framework for managing and controlling the city’s underground construction work and allows suitable locations to be allocated for underground facilities.Tampere,the third most populated city in Finland and the biggest inland city in the Nordic countries,is also a good example of a city that is taking steps to utilise underground resources.Oulu,the capital city of northern Finland,has also started to ‘go underground’.An example of the possibility to combine two cities by an 80-km subsea tunnel is also discussed.A new fixed link would generate huge potential for the capital areas of Finland and Estonia to become a real Helsinki-Tallinn twin city.展开更多
The University of California, Davis and the California Department of Water Resources have developed a weather generator application program “SIMETAW” to simulate weather data from climatic records and to estimate re...The University of California, Davis and the California Department of Water Resources have developed a weather generator application program “SIMETAW” to simulate weather data from climatic records and to estimate reference evapotranspiration (ETo) and crop evapotranspiration (ETc) with the generated simulation data or with observed data. A database of default soil depth and water holding characteristics, effective crop rooting depths, and crop coefficient (Kc) values to convert ETo to ETc are input into the program. After calculating daily ETc, the input and derived data are used to determine effective rainfall and to generate hypothetical irrigation schedules to estimate the seasonal and annual evapotranspiration of applied water (ETaw), where ETaw is the net amount of irrigation water needed to produce a crop. in this paper, we will discuss the simulation model and how it determines ETaw for use in water resources planning.展开更多
The California Simulation of Evapotranspiration of Applied Water (CaI-SIMETAW) model is a new tool developed by the California Department of Water Resources and the University of California, Davis to perform daily s...The California Simulation of Evapotranspiration of Applied Water (CaI-SIMETAW) model is a new tool developed by the California Department of Water Resources and the University of California, Davis to perform daily soil water balance and determine crop evapotranspiration (ETo), evapotranspiration of applied water (ETaw), and applied water (AW) for use in California water resources planning. ETaw is a seasonal estimate of the water needed to irrigate a crop assuming 100% irrigation efficiency. The model accounts for soils, crop coefficients, rooting depths, seepage, etc. that influence crop water balance. It provides spatial soil and climate information and it uses historical crop and land-use category information to provide seasonal water balance estimates by combinations of detailed analysis unit and county (DAU/County) over Califomia. The result is a large data base of ETc and ETaw that will be used to update information in the new California Water Plan (CWP). The application uses the daily climate data, i.e., maximum (Tx) and minimum (Tn) temperature and precipitation (Pcp), which were derived from monthly USDA-NRCS PRISM data (PRISM Group 2011) and daily US National Climate Data Center (NCDC) climate station data to cover California on a 4 kmx4 km change grid spacing. The application uses daily weather data to determine reference evapotranspiration (ETo), using the Hargreaves-Samani (HS) equation (Hargreaves and Samani 1982, 1985). Because the HS equation is based on temperature only, ETo from the HS equation were compared with CIMIS ETo at the same locations using available CIMIS data to determine correction factors to estimate CIMIS ETo from the HS ETo to account for spatial climate differences. CaI-SIMETAW also employs near real-time reference evapotranspiration (ETo) information from Spatial CIMIS, which is a model that combines weather station data and remote sensing to provide a grid of ETo information. A second database containing the available soil water holding capacity and soil depth information for all of California was also developed from the USDA-NRCS SSURGO database. The Cal-SIMETAW program also has the ability to generate daily weather data from monthly mean values for use in studying climate change scenarios and their possible impacts on water demand in the state. The key objective of this project is to improve the accuracy of water use estimates for the California Water Plan (CWP), which provides a comprehensive report on water supply, demand, and management in California. In this paper, we will discuss the model and how it determines ETaw for use in water resources planning.展开更多
Resource planning is becoming an increasingly important and timely problem for cloud users.As more Web services are moved to the cloud,minimizing network usage is often a key driver of cost control.Most existing appro...Resource planning is becoming an increasingly important and timely problem for cloud users.As more Web services are moved to the cloud,minimizing network usage is often a key driver of cost control.Most existing approaches focus on resources such as CPU,memory,and disk I/O.In particular,CPU receives the most attention from researchers,but the bandwidth is somehow neglected.It is challenging to predict the network throughput of modem Web services,due to the factors of diverse and complex response,evolving Web services,and complex network transportation.In this paper,we propose a methodology of what-if analysis,named Log2Sim,to plan the bandwidth resource of Web services.Log2Sim uses a lightweight workload model to describe user behavior,an automated mining approach to obtain characteristics of workloads and responses from massive Web logs,and traffic-aware simulations to predict the impact on the bandwidth consumption and the response time in changing contexts.We use a real-life Web system and a classic benchmark to evaluate Log2Sim in multiple scenarios.The evaluation result shows that Log2Sim has good performance in the prediction of bandwidth consumption.The average relative error is 2%for the benchmark and 8% for the real-life system.As for the response time,Log2Sim cannot produce accurate predictions for every single service request,but the simulation results always show similar trends on average response time with the increase of workloads in different changing contexts.It can provide sufficient information for the system administrator in proactive bandwidth planning.展开更多
Traditional ERP software system cannot efficiently su pport new management ideas such as BPR, DEM and virtual enterprise which emphasi zes that enterprise should be adjusted to market changes and business process ch a...Traditional ERP software system cannot efficiently su pport new management ideas such as BPR, DEM and virtual enterprise which emphasi zes that enterprise should be adjusted to market changes and business process ch ain and value chain should be integrated tightly. To solve these problems, this paper proposed the conception of Flexible ERP system. F-ERP is a self- adapti ve software system based on multi-agent technology. It developed the followin g kind of agents which are useful for F-ERP: business process agent, interf ace agent, data agent and decision and analysis agent. The F-ERP software syste m is an hierarchy system which is composed of data layer, system tools layer, bu siness application layer and business decision layer. It used component based de velopment mythology and complied with CORBA to development F-ERP. The F-ERP sy stem can support the new management ideas such as BPR, DEM and virtual enterpris e etc. By implementation of it, enterprise can improve its management and promot e its competence.展开更多
ERP systems have become an optimal solution for companies to perform their works with maximum advantages of Enterprise Resources Planning (ERP). Moreover, even though the cloud computing has many obstacles which need ...ERP systems have become an optimal solution for companies to perform their works with maximum advantages of Enterprise Resources Planning (ERP). Moreover, even though the cloud computing has many obstacles which need to be solved, but the enterprises always embrace the cloud. Many enterprises tend to adopt the cloud computing paradigm in order to get its leverage in successful and benefits. With the development of cloud computing technology, there is a growing orientation to move the ERP from inside boundaries of organizations into the cloud computing technologies. In addition, there were many studies that covered the cloud ERP without concentrating on acceptance the end user for this technology. Thus, this study comes to increase the understanding the attitude of the end user for cloud ERP technology. The main aim of this study is to investigate the employees’ attitude towards use of cloud ERP. The conceptual research framework of cloud ERP is prepared based on the technology acceptance model (TAM). The employees of Queen Rania Center (QRC) in Jordanian Education Ministry used the cloud ERP system which implemented according to this study. The questionnaires are distributed online to the sample. The results indicate that the QRC employees enjoyed using the cloud ERP system.展开更多
This paper presents a manufacturing mat er ial management system based on ERP, which is combined with industrial bar code i nformation collection and material management, and carries out extensive researc h on the sys...This paper presents a manufacturing mat er ial management system based on ERP, which is combined with industrial bar code i nformation collection and material management, and carries out extensive researc h on the system structure and function model, as well as a detailed application scheme.展开更多
This paper aims to develop a conceptual framework for real-time production planning and control(PPC).Firstly,we discuss the most prominently applied contemporary information and communication technologies for PPC.En...This paper aims to develop a conceptual framework for real-time production planning and control(PPC).Firstly,we discuss the most prominently applied contemporary information and communication technologies for PPC.Enterprise resource planning(ERP) systems that integrate the value chain in an enterprise,manufacturing execution systems that manage and control the production on shopfloor,and advanced planning and scheduling(APS)systems that develop solutions for complex planning problems are the planning and control systems that have been analyzed.We emphasize the application of radio frequency identification as the most advanced and promising emerging real-time data capture technology that is currently available to manufacturers.Having analyzed the features and shortcomings of the individual systems perse,and by considering the advantages that may be realized through effective integration of these otherwise discrete systems,we propose a framework for real-time PPC.展开更多
In order to adapt to market changes,speed up adjustment and transition&upgrading of mining industry structure,on November 29,the Ministry of Land and Resources joined the National Development and Reform Commission...In order to adapt to market changes,speed up adjustment and transition&upgrading of mining industry structure,on November 29,the Ministry of Land and Resources joined the National Development and Reform Commission,the Ministry of Industry and Information Technology,the Ministry of Finance,the Ministry of Environmental Protection,and the Ministry of Commerce。展开更多
Information Technology (IT) investments, especially Enterprise Resource Planning (ERP) systems, are critical for the survival and development of companies. Therefore, understanding the impact of ERP in- vestment i...Information Technology (IT) investments, especially Enterprise Resource Planning (ERP) systems, are critical for the survival and development of companies. Therefore, understanding the impact of ERP in- vestment is of great importance to managers and researchers. As a corporate performance indicator, Tobin's Q has some inherent advantages compared to other accounting indicators, and it can better reflect the con- tribution of ERP investment to company performance. This study employs multiple regression models to examine the impact of ERP investment on Tobin's Q. The sample consists of 126 manufacturing companies listed on the Shanghai and Shenzhen Stock Exchanges from 1999 to 2007. Empirical results show that in the first three years after ERP implementation, there is no significant change in Tobin's Q; however, in the fourth year, Tobin's Q increases significantly. The results indicate that, as a strategic long-term investment accompanied by large-scale business process reengineering and organizational learning, ERP implementa- tion has time-lagged effects; nonetheless, it eventually produces significant benefits.展开更多
Retailing is an important component of every country’s economic system. The current status and developments in the informization of Chinese retail industry were investigated by using questionnaires and interviews to ...Retailing is an important component of every country’s economic system. The current status and developments in the informization of Chinese retail industry were investigated by using questionnaires and interviews to survey 139 retailers throughout China. The investigation shows that Chinese retailers are in the initial informization stage, and can be classified into different types with corresponding informization characteristics. In addition, the survey identified the key problems faced by retailers in the initial stage. Developments in the information technology field were analyzed to identify the key technologies that Chinese retailers should focus on during the informization process. The investigation also shows that the retailers have not arrived at a consensus about information technology adoption, and thus hesitate to use new information technologies, such as the radio frequency identification.展开更多
Purpose–In this paper,two popular multiple-criteria decision-making(MCDM)methods with hesitant fuzzy logic approach;hesitant fuzzy analytic hierarchy process(hesitant F-AHP)and hesitant fuzzy the technique for order ...Purpose–In this paper,two popular multiple-criteria decision-making(MCDM)methods with hesitant fuzzy logic approach;hesitant fuzzy analytic hierarchy process(hesitant F-AHP)and hesitant fuzzy the technique for order preference by similarity to ideal solution(HF-TOPSIS)are integrated as HF-AHP-TOPSIS to evaluating a set of enterprise resource planning(ERP)alternatives and rank them by weight to reach to the ultimate one that satisfies the needs and expectations of a company.Design/methodology/approach–Selecting the best ERP software package among the rising number of the options in market has been a critical problem for most companies for a long time because of the reason that an improper ERP software package might lead to many issues(i.e.time loss,increased costs and a loss of market share).On the other hand,finding the best ERP alternative is a comprehensive MCDM problem in the presence of a set of alternatives and several potentially competing quantitative and qualitative criteria.Findings–In this integrated approach,the hesitant F-AHP is used to determine the criteria weights,as the hesitant F-TOPSIS is utilized to rank ERP package alternatives.The proposed approach was also validated in a numerical example that has five ERP package alternatives and 12 criteria by three decision-makers in order to show its applicability to potential readers and practitioners.Research limitations/implications–If the number of the alternatives and criteria are dramatically increased beyond reasonable numbers,the reaching to final solution will be so difficult because of the great deal of fuzzy based calculations.Therefore,the number of criteria and alternatives should be at reasonable numbers.Practical implications–The proposed approach was also validated in a illustrated example with the five ERP package options and 12 criteria by the three decision-makers in order to show its applicability to potential readers and practitioners.Originality/value–Furthermore,in literature,to the best of our knowledge,the authors did not come cross any work that integrates the HF-AHP with the HF-TOPSIS for ERP software package selection problem.展开更多
基金This work was partly supported by the Institute of Information&communications Technology Planning&Evaluation(IITP)grant funded by theKorean government(MSIT)(No.2021-0-02068,Artificial Intelligence Innovation Hub)(No.RS-2022-00155966,Artificial Intelligence Convergence Innovation Human Resources Development(Ewha University)).
文摘AI(Artificial Intelligence)workloads are proliferating in modernreal-time systems.As the tasks of AI workloads fluctuate over time,resourceplanning policies used for traditional fixed real-time tasks should be reexamined.In particular,it is difficult to immediately handle changes inreal-time tasks without violating the deadline constraints.To cope with thissituation,this paper analyzes the task situations of AI workloads and findsthe following two observations.First,resource planning for AI workloadsis a complicated search problem that requires much time for optimization.Second,although the task set of an AI workload may change over time,thepossible combinations of the task sets are known in advance.Based on theseobservations,this paper proposes a new resource planning scheme for AIworkloads that supports the re-planning of resources.Instead of generatingresource plans on the fly,the proposed scheme pre-determines resourceplans for various combinations of tasks.Thus,in any case,the workload isimmediately executed according to the resource plan maintained.Specifically,the proposed scheme maintains an optimized CPU(Central Processing Unit)and memory resource plan using genetic algorithms and applies it as soonas the workload changes.The proposed scheme is implemented in the opensourcesimulator SimRTS for the validation of its effectiveness.Simulationexperiments show that the proposed scheme reduces the energy consumptionof CPU and memory by 45.5%on average without deadline misses.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2002AA411030)National Defense Foundation Scientific Research of China (Grant No. d2520061124)
文摘Network-based manufacturing is a kind of distributed system, which enables manufacturers to finish production tasks as well as to grasp the opportunities in the market, even if manufacturing resources are insufficient. One of the main problems in network-based manufacturing is the allocation of resources and the assignment of tasks rationally, according to flexible resource distribution. The mapping rules and relations between production techniques and resources are proposed, followed by the definition of the resource unit. Ultimately, the genetic programming method for the optimization of the manufacturing system is put forward. A set of software for the optimization system of simulation process using genetic programming techniques has been developed, and the problems of manufacturing resource planning in network-based manufacturing are solved with the simulation of optimizing methods by genetic programming. The optimum proposal of hardware planning, selection of company and scheduling will be obtained in theory to help company managers in scientific decision-making.
基金supported by in part by the National Natural Science Foundation of China under Grant Nos.71390334 and 71132008the MOE Project of Key Research Institute of Humanities and Social Sciences at Universities under Grant No.11JJD630004Program for New Century Excellent Talents in University under Grant No.NCET-13-0660
文摘This paper generalizes the classic resource allocation problem to the resource planning and allocation problem, in which the resource itself is a decision variable and the cost of each activity is uncertain when the resource is determined. The authors formulate this problem as a two-stage stochastic programming. The authors first propose an efficient algorithm for the case with finite states. Then, a sudgradient method is proposed for the general case and it is shown that the simple algorithm for the unique state case can be used to compute the subgradient of the objective function. Numerical experiments are conducted to show the effectiveness of the model.
文摘While the enterprise resource planning (ERP) systems become more and more complex, the traditional tools such as DCOM, CORBA or EJB encounter more difficulties than before especially when heterogenous and distributed environment and multiple companies are involved. The newly born international specification SOAP brings a new solution to ERP because of its simplicity and high extensibility. This paper analyses the techniques to extend basic SOAP to implement ERP system. The techniques, including data envelope, dynamically and loosely coupled remote process calling (RPC), support to the multiple communication protocol, and security and performance improvement, greatly enhance the ability of basic SOAP and make it capable to accomplish the integration task in large scale ERP systems. All the techniques we discusse here are successfully utilized in the ERP system in the Three Gorge Cascade Dispatch Center of China Three Gorge Project Corporation.
文摘Designed as a tool for business intelligence, resource planning is used to manage the essentials of a business by integrating processes into a single system. Enterprise Resource Planning (ERP) solutions ensure all the organizational, operational, and procedural structures interconnection, which can be both an advantage and a disadvantage, knowing that inefficiency within one structure will lead to inefficiency in others. The originality of the approach consists in the unitary analysis of all processes which shipbuilding involves (design;evaluation of ship construction possibilities;contracting of works;contracting of supply of materials and equipment;presentation of inspections for the completed works reception;delivery of the ship into operation). The systemic approach is a notable contribution by highlighting the input and output quantities for the analyzed processes. Also, where it was found relevant, the diagrams highlight the owners of the process and show the interconnectivity of the functional departments within a shipyard. Although it is obviously the expression of in-depth knowledge of the peculiarities of Romanian shipyards, the authors hope that the work can support any shipyard that may be interested in knowing these structures (as a logical scheme mandatory to design a custom ERP software system).
基金This work was supported by Hong Kong Polytechnic University(No.G.45.37.T363),the National Natural Science Foundation of PRC(No.70431003,60521003).
文摘Procurement planning with discrete time varying demand is an important problem in Enterprise Resource Planning (ERP). It can be described using the non-analytic mathematical programming model proposed in this paper. To solve the model we propose to use a fuzzy decision embedded genetic algorithm. The algorithm adopts an order strategy selection to simplify the original real optimization problem into binary ones. Then, a fuzzy decision quantification method is used to quantify experience from planning experts. Thus, decision rules can easily be embedded in the computation of genetic operations. This approach is applied to purchase planning problem in a practical machine tool works, where satisfactory results have been achieved.
文摘This paper gives insight into the use of underground space in Helsinki,Finland.The city has an underground master plan(UMP) for its whole municipal area,not only for certain parts of the city.Further,the decision-making history of the UMP is described step-by-step.Some examples of underground space use in other cities are also given.The focus of this paper is on the sustainability issues related to urban underground space use,including its contribution to an environmentally sustainable and aesthetically acceptable landscape,anticipated structural longevity and maintaining the opportunity for urban development by future generations.Underground planning enhances overall safety and economy efficiency.The need for underground space use in city areas has grown rapidly since the 21 st century;at the same time,the necessity to control construction work has also increased.The UMP of Helsinki reserves designated space for public and private utilities in various underground areas of bedrock over the long term.The plan also provides the framework for managing and controlling the city’s underground construction work and allows suitable locations to be allocated for underground facilities.Tampere,the third most populated city in Finland and the biggest inland city in the Nordic countries,is also a good example of a city that is taking steps to utilise underground resources.Oulu,the capital city of northern Finland,has also started to ‘go underground’.An example of the possibility to combine two cities by an 80-km subsea tunnel is also discussed.A new fixed link would generate huge potential for the capital areas of Finland and Estonia to become a real Helsinki-Tallinn twin city.
文摘The University of California, Davis and the California Department of Water Resources have developed a weather generator application program “SIMETAW” to simulate weather data from climatic records and to estimate reference evapotranspiration (ETo) and crop evapotranspiration (ETc) with the generated simulation data or with observed data. A database of default soil depth and water holding characteristics, effective crop rooting depths, and crop coefficient (Kc) values to convert ETo to ETc are input into the program. After calculating daily ETc, the input and derived data are used to determine effective rainfall and to generate hypothetical irrigation schedules to estimate the seasonal and annual evapotranspiration of applied water (ETaw), where ETaw is the net amount of irrigation water needed to produce a crop. in this paper, we will discuss the simulation model and how it determines ETaw for use in water resources planning.
基金supported and funded by the California Department of Water Resources(DWR)
文摘The California Simulation of Evapotranspiration of Applied Water (CaI-SIMETAW) model is a new tool developed by the California Department of Water Resources and the University of California, Davis to perform daily soil water balance and determine crop evapotranspiration (ETo), evapotranspiration of applied water (ETaw), and applied water (AW) for use in California water resources planning. ETaw is a seasonal estimate of the water needed to irrigate a crop assuming 100% irrigation efficiency. The model accounts for soils, crop coefficients, rooting depths, seepage, etc. that influence crop water balance. It provides spatial soil and climate information and it uses historical crop and land-use category information to provide seasonal water balance estimates by combinations of detailed analysis unit and county (DAU/County) over Califomia. The result is a large data base of ETc and ETaw that will be used to update information in the new California Water Plan (CWP). The application uses the daily climate data, i.e., maximum (Tx) and minimum (Tn) temperature and precipitation (Pcp), which were derived from monthly USDA-NRCS PRISM data (PRISM Group 2011) and daily US National Climate Data Center (NCDC) climate station data to cover California on a 4 kmx4 km change grid spacing. The application uses daily weather data to determine reference evapotranspiration (ETo), using the Hargreaves-Samani (HS) equation (Hargreaves and Samani 1982, 1985). Because the HS equation is based on temperature only, ETo from the HS equation were compared with CIMIS ETo at the same locations using available CIMIS data to determine correction factors to estimate CIMIS ETo from the HS ETo to account for spatial climate differences. CaI-SIMETAW also employs near real-time reference evapotranspiration (ETo) information from Spatial CIMIS, which is a model that combines weather station data and remote sensing to provide a grid of ETo information. A second database containing the available soil water holding capacity and soil depth information for all of California was also developed from the USDA-NRCS SSURGO database. The Cal-SIMETAW program also has the ability to generate daily weather data from monthly mean values for use in studying climate change scenarios and their possible impacts on water demand in the state. The key objective of this project is to improve the accuracy of water use estimates for the California Water Plan (CWP), which provides a comprehensive report on water supply, demand, and management in California. In this paper, we will discuss the model and how it determines ETaw for use in water resources planning.
基金This work was supported by the National Key Research and Development Program of China(2018YFB1003302)the National Natural Science Foundation of China(Grant No.61472241).
文摘Resource planning is becoming an increasingly important and timely problem for cloud users.As more Web services are moved to the cloud,minimizing network usage is often a key driver of cost control.Most existing approaches focus on resources such as CPU,memory,and disk I/O.In particular,CPU receives the most attention from researchers,but the bandwidth is somehow neglected.It is challenging to predict the network throughput of modem Web services,due to the factors of diverse and complex response,evolving Web services,and complex network transportation.In this paper,we propose a methodology of what-if analysis,named Log2Sim,to plan the bandwidth resource of Web services.Log2Sim uses a lightweight workload model to describe user behavior,an automated mining approach to obtain characteristics of workloads and responses from massive Web logs,and traffic-aware simulations to predict the impact on the bandwidth consumption and the response time in changing contexts.We use a real-life Web system and a classic benchmark to evaluate Log2Sim in multiple scenarios.The evaluation result shows that Log2Sim has good performance in the prediction of bandwidth consumption.The average relative error is 2%for the benchmark and 8% for the real-life system.As for the response time,Log2Sim cannot produce accurate predictions for every single service request,but the simulation results always show similar trends on average response time with the increase of workloads in different changing contexts.It can provide sufficient information for the system administrator in proactive bandwidth planning.
文摘Traditional ERP software system cannot efficiently su pport new management ideas such as BPR, DEM and virtual enterprise which emphasi zes that enterprise should be adjusted to market changes and business process ch ain and value chain should be integrated tightly. To solve these problems, this paper proposed the conception of Flexible ERP system. F-ERP is a self- adapti ve software system based on multi-agent technology. It developed the followin g kind of agents which are useful for F-ERP: business process agent, interf ace agent, data agent and decision and analysis agent. The F-ERP software syste m is an hierarchy system which is composed of data layer, system tools layer, bu siness application layer and business decision layer. It used component based de velopment mythology and complied with CORBA to development F-ERP. The F-ERP sy stem can support the new management ideas such as BPR, DEM and virtual enterpris e etc. By implementation of it, enterprise can improve its management and promot e its competence.
文摘ERP systems have become an optimal solution for companies to perform their works with maximum advantages of Enterprise Resources Planning (ERP). Moreover, even though the cloud computing has many obstacles which need to be solved, but the enterprises always embrace the cloud. Many enterprises tend to adopt the cloud computing paradigm in order to get its leverage in successful and benefits. With the development of cloud computing technology, there is a growing orientation to move the ERP from inside boundaries of organizations into the cloud computing technologies. In addition, there were many studies that covered the cloud ERP without concentrating on acceptance the end user for this technology. Thus, this study comes to increase the understanding the attitude of the end user for cloud ERP technology. The main aim of this study is to investigate the employees’ attitude towards use of cloud ERP. The conceptual research framework of cloud ERP is prepared based on the technology acceptance model (TAM). The employees of Queen Rania Center (QRC) in Jordanian Education Ministry used the cloud ERP system which implemented according to this study. The questionnaires are distributed online to the sample. The results indicate that the QRC employees enjoyed using the cloud ERP system.
文摘This paper presents a manufacturing mat er ial management system based on ERP, which is combined with industrial bar code i nformation collection and material management, and carries out extensive researc h on the system structure and function model, as well as a detailed application scheme.
基金support of the research program SFI NORMAN(Norwegian Manufacturing Future)
文摘This paper aims to develop a conceptual framework for real-time production planning and control(PPC).Firstly,we discuss the most prominently applied contemporary information and communication technologies for PPC.Enterprise resource planning(ERP) systems that integrate the value chain in an enterprise,manufacturing execution systems that manage and control the production on shopfloor,and advanced planning and scheduling(APS)systems that develop solutions for complex planning problems are the planning and control systems that have been analyzed.We emphasize the application of radio frequency identification as the most advanced and promising emerging real-time data capture technology that is currently available to manufacturers.Having analyzed the features and shortcomings of the individual systems perse,and by considering the advantages that may be realized through effective integration of these otherwise discrete systems,we propose a framework for real-time PPC.
文摘In order to adapt to market changes,speed up adjustment and transition&upgrading of mining industry structure,on November 29,the Ministry of Land and Resources joined the National Development and Reform Commission,the Ministry of Industry and Information Technology,the Ministry of Finance,the Ministry of Environmental Protection,and the Ministry of Commerce。
基金Supported by the National Natural Science Foundation of China (No. 70831003)
文摘Information Technology (IT) investments, especially Enterprise Resource Planning (ERP) systems, are critical for the survival and development of companies. Therefore, understanding the impact of ERP in- vestment is of great importance to managers and researchers. As a corporate performance indicator, Tobin's Q has some inherent advantages compared to other accounting indicators, and it can better reflect the con- tribution of ERP investment to company performance. This study employs multiple regression models to examine the impact of ERP investment on Tobin's Q. The sample consists of 126 manufacturing companies listed on the Shanghai and Shenzhen Stock Exchanges from 1999 to 2007. Empirical results show that in the first three years after ERP implementation, there is no significant change in Tobin's Q; however, in the fourth year, Tobin's Q increases significantly. The results indicate that, as a strategic long-term investment accompanied by large-scale business process reengineering and organizational learning, ERP implementa- tion has time-lagged effects; nonetheless, it eventually produces significant benefits.
基金Supported by the National Natural Science Foundation of China (Nos. 70621061, 70471005, and 70601017)
文摘Retailing is an important component of every country’s economic system. The current status and developments in the informization of Chinese retail industry were investigated by using questionnaires and interviews to survey 139 retailers throughout China. The investigation shows that Chinese retailers are in the initial informization stage, and can be classified into different types with corresponding informization characteristics. In addition, the survey identified the key problems faced by retailers in the initial stage. Developments in the information technology field were analyzed to identify the key technologies that Chinese retailers should focus on during the informization process. The investigation also shows that the retailers have not arrived at a consensus about information technology adoption, and thus hesitate to use new information technologies, such as the radio frequency identification.
文摘Purpose–In this paper,two popular multiple-criteria decision-making(MCDM)methods with hesitant fuzzy logic approach;hesitant fuzzy analytic hierarchy process(hesitant F-AHP)and hesitant fuzzy the technique for order preference by similarity to ideal solution(HF-TOPSIS)are integrated as HF-AHP-TOPSIS to evaluating a set of enterprise resource planning(ERP)alternatives and rank them by weight to reach to the ultimate one that satisfies the needs and expectations of a company.Design/methodology/approach–Selecting the best ERP software package among the rising number of the options in market has been a critical problem for most companies for a long time because of the reason that an improper ERP software package might lead to many issues(i.e.time loss,increased costs and a loss of market share).On the other hand,finding the best ERP alternative is a comprehensive MCDM problem in the presence of a set of alternatives and several potentially competing quantitative and qualitative criteria.Findings–In this integrated approach,the hesitant F-AHP is used to determine the criteria weights,as the hesitant F-TOPSIS is utilized to rank ERP package alternatives.The proposed approach was also validated in a numerical example that has five ERP package alternatives and 12 criteria by three decision-makers in order to show its applicability to potential readers and practitioners.Research limitations/implications–If the number of the alternatives and criteria are dramatically increased beyond reasonable numbers,the reaching to final solution will be so difficult because of the great deal of fuzzy based calculations.Therefore,the number of criteria and alternatives should be at reasonable numbers.Practical implications–The proposed approach was also validated in a illustrated example with the five ERP package options and 12 criteria by the three decision-makers in order to show its applicability to potential readers and practitioners.Originality/value–Furthermore,in literature,to the best of our knowledge,the authors did not come cross any work that integrates the HF-AHP with the HF-TOPSIS for ERP software package selection problem.