An extended multiple-support response spectrum method incorporating fluid-structure interaction for seismic analysis of deep-water bridges

The effects of ground motion spatial variability(GMSV)or fluid-structure interaction(FSI)on the seismic responses of deep-water bridges have been extensively examined.However,there are few studies on the seismic performance of bridges considering GMSV and FSI effects simultaneously.In this study,the original multiple-support response spectrum(MSRS)method is extended to consider FSI effect for seismic analysis of deep-water bridges.The solution of hydrodynamic pressure on a pier is obtained using the radiation wave theory,and the FSI-MSRS formulation is derived according to the random vibration theory.The influence of FSI effect on the related coefficients is analyzed.A five-span steel-concrete continuous beam bridge is adopted to conduct the numerical simulations.Different load conditions are designed to investigate the variation of the bridge responses when considering the GMSV and FSI effects.The results indicate that the incoherence effect and wave passage effect decrease the bridge responses with a maximum percentage of 86%,while the FSI effect increases the responses with a maximum percentage of 26%.The GMSV and FSI effects should be included in the seismic design of deep-water bridges.

A simplified multisupport response spectrum method

A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures.

Comparison between Response Spectrum and Time History Method of Dynamic Analysis of Concrete Gravity Dam

Dam structure built to store water has failed with resulting loss of life, social, economic and environmental losses due to seismic vibrations. These vibrations are dynamic in nature. These vibrations must be reduced with proper application of engineering principles and for estimating the behavior of concrete gravity dam dynamic analysis plays an extraordinary role. This paper presents the dynamic time history analysis and response spectrum method of a concrete gravity dam by using STAAD-PRO. Here Finite Element Approach is used to analyze the dam. A concrete gravity dam model is prepared in STAAD-PRO to perform the time history analysis and response spectrum analysis and a comparison is done between both these methods. Concrete gravity dam is a large structure which retains a very large amount of water on its upstream side and it is very crucial for a dam to survive against vibrations of earthquake. So it is a matter of study to check the behaviour of a dam during and after the application of the loading.

A probability-consistent method based on practical ground surface motion

In this paper, a new method for seismic hazard analysis, the probability-consistent method based on practical ground surface motion is proposed. Time histories on ground surface in the method correspond to earthquakes occurring at potential sources around sites. So of the envelope parameter, response spectrum, peak ground acceleration are of physical sense. Neglecting the response of site soil layers, the method is the same as routine probability-consistent method. The natural seismic acceleration time histories can be used for input wave directly. Generating ground motion is an approximation under lack of data of strong motion. Along with accumulating of the strong motion data around sites, we can describe the seismic environment more objectively.

Perturbation spectrum method for seismic analysis of non-classically damped systems

Fundamental principles from structural dynamics,random theory and perturbation methods are adopted to develop a new response spectrum combination rule for the seismic analysis of non-classically damped systems,such as structure-damper systems. The approach,which is named the perturbation spectrum method,can provide a more accurate evaluation of a non-classically damped system's mean peak response in terms of the ground response spectrum. To account for the effect of non-classical damping,all elements are included in the proposed method for seismic analysis of structure,which is usually ap-proximated by ignoring the off-diagonal elements of the modal damping matrix. Moreover,as has been adopted in the traditional Complete Quadratic Combination (CQC) method,the white noise model is also used to simplify the expressions of perturbation correlation coefficients. Finally,numerical work is performed to examine the accuracy of the proposed method by comparing the approximate results with exact ones and to demonstrate the importance of the neglected off-diagonal elements of the modal damping matrix. In the examined cases,the proposed method shows good agreement with direct time-history integration. Also,the perturbation spectrum method leads to a more efficient and economical calculation by avoiding the integral and complex operation.

Equivalent damping of SDOF structure with Maxwell damper

To predict the maximum earthquake response of an SDOF structure with a Maxwell fluid damper or supplemental brace-viscous damper system using the seismic design response spectrum technique,a new approach is presented to determine the first-and second-order equivalent viscous damping and stiffness,the peak responses,and the damper force of the above structure.Based on the fact that the dynamic characteristics of a general linear viscoelastically damped structure are fully determined by its free vibration properties and the relaxation time constants of a Maxwell fluid damper and supplemental brace-viscous damper system in engineering practice are all small,the method of improved multiple time scales and the equivalent criterion in which all free vibration properties are the same are used to obtain the first-and second-order equivalent viscous damping and stiffness of the above structure in closed form.The accuracy of the proposed method is higher and significantly better than that of the modal strain energy method.Furthermore,in the parametric range of the requirements of the Chinese ＂Code for Seismic Design of Buildings＂,the error of the proposed second-order equivalent system for the abovementioned engineering structure is not more than 0.5%.

A Comparative Study of Behavior of Multi-Storied Regular and Irregular Buildings under Static and Dynamic Loading

One of the major challenges of constructing any high rise building for civil engineers is to make it earthquake resistant. This resistance largely depends on the building’s shape and structural system. A comparative study has been done in this paper about the seismic behavior and response of buildings having a regular plan and plan irregularity (re-entrant corners). The 5 building models considered in this study are 15 stories each, the same area and identical weight. Among the 5 building models, 2 are with a regular plan (square, rectangle) and the other 3 building models are with plan irregularity (re-entrant corners). All of them are modeled using ETABS 2015 program for Dhaka, Bangladesh (seismic zone 2). Static loads, wind loads and seismic loads are considered for each model and dynamic response under Bangladesh National Building Code (BNBC) 2006 response spectrum has been meticulously analyzed. A comparison for story displacement, base shear, story drift and time period has been established and explored for dynamic response spectrum among the models. The results show that buildings with irregularity have a greater value of time period, drift and displacement and hereby are more susceptible to damage during an earthquake or disaster.

Optimization design of anti-seismic engineering measures for intake tower based on non-dominated sorting genetic algorithm-Ⅱ

High-rise intake towers in high-intensity seismic areas are prone to structural safety problems under vibration.Therefore,effective and low-cost anti-seismic engineering measures must be designed for protection.An intake tower in northwest China was considered the research object,and its natural vibration characteristics and dynamic response were first analyzed using the mode decomposition response spectrum method based on a three-dimensional finite element model.The non-dominated sorting genetic algorithm-II(NSGA-II)was adopted to optimize the anti-seismic scheme combination by comprehensively considering the dynamic tower response and variable project cost.Finally,the rationality of the original intake tower antiseismic design scheme was evaluated according to the obtained optimal solution set,and recommendations for improvement were proposed.The method adopted in this study may provide significant references for designing anti-seismic measures for high-rise structures such as intake towers located in high-intensity earthquake areas.