Reversed flow injection spectrophotometric determination of low residuals of chlorine dioxide in water using chlorophenol red

A novel, simple, rapid, sensitive and highly selective flow injection procedure for the spectrophotometric determination of chlorine dioxide in the presence of other chlorine species, viz,free chlorine, chlorite, chlorate and hypochlorite, is developed. The method is based on the discoloration reaction between chlorine dioxide and chlorophenol red and can overcome the shortcomings existed in direct spectrophotometric determination for chlorine dioxide owing to the serious interference of free and combined chlorine. The procedure gave a linear calibration graph over the range 0—0.71 mg/L of chlorine dioxide. With a detection limit of 0.024 mg/L and a sample throughput of 60 samples/h.

Kinetic-spectrophotometric determination of free cyanide by stopped-flow reversed flow injection analysis

A stopped-flow reversed flow injection method for the determination of free cyanide is proposed. Pyridine-barbituric acid mixture is injected in the flow system as reagent to form the colour species with cyanide. The flow is stopped when the reagent zone comes in the flow cell, where absorbance-time data are collected at 580nm wavelength. The linear range of the determination is 0.1 -10μg/ml CN-. The sampling rate is 60h-1 and the relative standard deviation is 1.6% (n=16) at 5.0 μg/ml CN-1 level. With satisfactory results, the proposed method was applied to the determination of free cyanide in wastewater without sample pretreatment.

FeatureMatching Combining Variable Velocity Model with Reverse Optical Flow

The ORB-SLAM2 based on the constant velocity model is difficult to determine the search window of the reprojection of map points when the objects are in variable velocity motion,which leads to a false matching,with an inaccurate pose estimation or failed tracking.To address the challenge above,a new method of feature point matching is proposed in this paper,which combines the variable velocity model with the reverse optical flow method.First,the constant velocity model is extended to a new variable velocity model,and the expanded variable velocity model is used to provide the initial pixel shifting for the reverse optical flow method.Then the search range of feature points is accurately determined according to the results of the reverse optical flow method,thereby improving the accuracy and reliability of feature matching,with strengthened interframe tracking effects.Finally,we tested on TUM data set based on the RGB-D camera.Experimental results show that this method can reduce the probability of tracking failure and improve localization accuracy on SLAM(Simultaneous Localization and Mapping)systems.Compared with the traditional ORB-SLAM2,the test error of this method on each sequence in the TUM data set is significantly reduced,and the root mean square error is only 63.8%of the original system under the optimal condition.

Sap flow rates of Minquartia guianensis in central Amazonia during the prolonged dry season of 2015–2016

Minquartia guianensis Aubl.is a slow-growing species with several uses.In the juvenile state,it is well-adapted to low light conditions of the forest understory.However,it is still unknown how climate variability affects transpiration of this species,particularly under drought stress.In this study,we aimed to assess the effect of climatic variability on sap flow rates(SFR).SFR and radial growth were measured in six trees(14-50 cm diameter)in 2015 and 2016.Climate(precipitation,irradiance,relative humidity and temperature)and soil water content(SWC)data were also collected.SFR tended to increase in the dry season,with a negative relationship between SFR and SWC and precipitation(p<0.001),while there was a positive association between radial growth and monthly precipitation(p=0.004).Irradiance and temperature were the environmental factors more closely correlated with SFR during daytime(p<0.001),whereas relative humidity and vapor pressure deficit were the most important factors at night(p<0.001).Although negative SFR were sometimes recorded at night,the mean nocturnal sap flow was positive and across trees the nighttime sap flow accounted for 12.5%of the total daily sap flow.Increased transpiration during the dry season suggests that the root system of Minquartia was able to extract water from deep soil layers.These results widen our understanding of the ecophysiology of Amazonian trees under drought and provide further insight into the potential effect of the forecasted decline in precipitation in the Amazon region.

FLOW CHARACTERISTICS OF WALLFLOW DIESEL PARTICULATE FILTER SYSTEM WITH REVERSE PULSE AIR REGENERATION

To simulate steady airflows inside of wall-flow diesel particulate filters （DPF） with different reverse blowing pipes collocation, a mathematical model of the flow in a DPF is established by an equivalent continuum approach. The experimental results agree well with the theoretical values calculated from the model. Simulation shows that the velocity and the pressure distribution of the filters in the regenerative process are key factors to the filter＇s regeneration. How to decrease the mal-distribution of the flow in the filter and how to achieve the better regenerative performance at the least cost of air consumption in the regenerative process are the ultimate goals of the study. Calculation and experiments show that the goals can be realized through adjusting the angle of two reverse blowing pipes and their relative location suitably.

Numerical analysis of high Mach flow and flow reversal in the experimental advanced superconducting tokamak divertor

The B2-Eirene （SOLPS 4.0） code package is used to investigate the plasma parallel flow, i.e., the scrape-off layer （SOL） flow, in the experimental advanced superconducting tokamak （EAST） divertor. Simulation results show that the SOL flow in the divertor region can exhibit complex behaviour, such as a high Mach flow and flow reversal in different plasma regimes. When the divertor plasma is in the detachment state, the high Mach flow with approaching or exceeding sonic speed is observed away from the target plate in our simulation. When the divertor plasma is in the high recycling ~tate, the flow reversM with a ~mall Mach number （IMI 〈 0.2） is observed near the X-point along the separatrix region. The driving mechanisms for the high Mach flow and the reversed flow are analysed theoretically through momentum and continuity equations, respectively. The profile of the ionization sources is shown to be a possible formation condition causing the complex behaviour of the SOL flow. In addition, the effects of the high Mach flow and the flow reversal on the impurity transport are also discussed in this paper.

Peristaltic transport of rheological fluid:model for movement of food bolus through esophagus

Fluid mechanical peristaltic transport through esophagus is studied in the paper. A mathematical model has been developed to study the peristaltic transport of a rheological fluid for arbitrary wave shapes and tube lengths. The Ostwald-de Waele power law of a viscous fluid is considered here to depict the non-Newtonian behaviour of the fluid. The model is formulated and analyzed specifically to explore some important information concerning the movement of food bolus through esophagus. The analysis is carried out by using the lubrication theory. The study is particularly suitable for the cases where the Reynolds number is small. The esophagus is treated as a circular tube through which the transport of food bolus takes place by periodic contraction of the esophageal wall. Variation of different variables concerned with the transport phenomena such as pressure, flow velocities, particle trajectory, and reflux is investigated for a single wave as well as a train of periodic peristaltic waves. The locally variable pressure is seen to be highly sensitive to the flow index ＂n＂. The study clearly shows that continuous fluid transport for Newtonian/rheological fluids by wave train propagation is more effective than widely spaced single wave propagation in the case of peristaltic movement of food bolus in the esophagus.

Optical and SuperDARN radar observations of duskside shock aurora over Zhongshan Station

We present observations of a duskside shock aurora occurred on 21 April 2001 by the SuperDARN radar at Syowa Station and the all-sky camera at Zhongshan Station （ZHS） in Antarctica when the radar was operated in fast-scan mode covering the ZHS region. With the two independent data sets, we examine ionospheric plasma convection and aurora arising from a sudden impulse （SI） event associated with an interplanetary shock. During the transient shock compression, the aurora was quiescent without any optical emission at the preliminary impulse of the SI. About 7 min later, a new thin auroral arc with brighter emissions and a lifetime of -14 rain expanded westward from the region above ZHS during the main impulse of the SI. SuperDARN radar line-of-sight measurements showed periodical oscillation in the flow direction with ultra-low-frequency waves having a period of -8 min during the shock compression. We suggest that downward field-aligned current during the preliminary impulse stage of the SI was the main driver of the first plasma flow reversal, and the subsequent new discrete auroral arc may be associated with field-aligned acceleration in the region of the main impulse related upward field-aligned currents. The ground magnetometer observations suggest that the oscillation of the ionospheric convection on the duskside was associated with field line resonance activity.

PLAIN CASCADE RESEARCH ON A REVERSIBLE COMBINED BLADE

A new type fully reversible combined blade is presented, which can fully reverse airflow during the inverse ventilation by simply reversion. It is suitable for reversible axial flow fans used in tunnel and mine ventilation. The optimal parameters such as overlap ratio and pitch ratio are determined through cascade experiment. Experiment results also show a big promotion of maximum lift coefficient C1,max and stall attack angle a1,max compared to the existing bi-directional symmetry airfoils.

Rheological fluid motion in tube by metachronal waves of cilia

This paper presents a theoretical study of a non-linear rheological fluid transport in an axisymmetric tube by cilia. An attempt has been made to explain the role of cilia motion in the transport of fluid through the ductus efferent of the male reproductive tract. The Ostwald-de Waele power-law viscous fluid is considered to represent the rheological fluid. We analyze pumping by means of a sequence of cilia beats from rowto-row of cilia in a given row of cells and from one row of cells to the next(metachronal wave movement). For this purpose, we consider the conditions that the corresponding Reynolds number is small enough for inertial effects to be negligible, and the wavelengthto-diameter ratio is large enough so that the pressure can be considered uniform over the cross section. Analyses and computations of the fluid motion reveal that the time-average flow rate depends on ε, a non-dimensional measure involving the mean radius a of the tube and the cilia length. Thus, the flow rate significantly varies with the cilia length.Moreover, the flow rate has been reported to be close to the estimated value 6 × 10ml/h for human efferent ducts if ε is near 0.4. The estimated value was suggested by Lardner and Shack(Lardner, T. J. and Shack, W. J. Cilia transport. Bulletin of Mathematical Biology, 34, 325–335(1972)) for human based on the experimental observations of flow rates in efferent ducts of other animals, e.g., rat, ram, and bull. In addition, the nature of the rheological fluid, i.e., the value of the fluid index n strongly influences various flow-governed characteristics. An interesting feature of this paper is that the pumping improves the thickening behavior for small values of ε or in free pumping(?P = 0) and pumping(?P > 0) regions.

Hydrodynamic Anisotropy Effects on Radiation-Mixed Convection Interaction in a Vertical Porous Channel

The effects of hydrodynamic anisotropy on the mixed-convection in a vertical porous channel heated on its plates with a thermal radiation are investigated analytically for fully developed flow regime. The porous medium is anisotropic in permeability whose principal axes are oriented in a direction that is oblique to the gravity. The generalized Brinkman-extended Darcy model which allows the no-slip boundary-condition on solid wall is used in the formulation of the problem. The flow reversal, the thermal radiation influence for natural, and forced convection are considered in the limiting cases for low and high porosity media. It was found that the anisotropic permeability ratio, the orientation angle of the principal axes of permeability and the radiation parameter affected significantly the flow regime and the heat transfer.

Validation of a novel mixing-plane method for multistage turbomachinery steady flow analysis

The steady calculation based on the mixing-plane method is still the most widely-used three-dimensional flow analysis tool for multistage turbomachines. For modern turbomachines,the trend of design is to reach higher aerodynamic loading but with still further compact size. In such a case, the traditional mixing-plane method has to be revised to give a more physically meaningful prediction. In this paper, a novel mixing-plane method was proposed, and three representative test cases including a transonic compressor, a highly-loaded centrifugal compressor and a highpressure axial turbine were performed for validation purpose. This novel mixing-plane method can satisfy the flux conservation perfectly. Reverse flow across the mixing-plane interface can be resolved naturally, thus making this method numerically robust. Artificial reflection at the mixing-plane interface is almost eliminated, and then its detrimental impact on the flow field is minimized. Generally, this mixing-plane method is suitable to simulate steady flows in highly-loaded multistage turbomachines.

A logic-based controller for the mitigation of ventilation air methane in a catalytic flow reversal reactor

The control system of a catalytic flow reversal reactor （CFRR） for the mitigation of ventilation air methane was investigated. A one-dimensional heteroge- neous model with a logic-based controller was applied to simulate the CFRR. The simulation results indicated that the controller developed in this work performs well under normal conditions. Air dilution and auxiliary methane injection are effective to avoid the catalyst overheating and reaction extinction caused by prolonged rich and lean feed conditions, respectively. In contrast, the reactor is prone to lose control by adjusting the switching time solely. Air dilution exhibits the effects of two contradictory aspects on the operation of CFRR, i.e., cooling the bed and accumulating heat, though the former is in general more prominent. Lowering the reference temperature for flow reversal can decrease the bed temperature and benefit stable operation under rich methane feed condition.

Numerical studies of undulation control on dynamic stall for reverse flows

The delayed detached-eddy simulation with adaptive coefficient(DDES-AC)method is used to simulate the baseline and leading-edge undulation control of dynamic stall for the reverse flow past a finite-span wing with NACA0012 airfoil.The numerical results of the baseline configuration are compared with available measurements.DDES and DDES-AC perform differently when predicting the primary and secondary dynamic stalls.Overall,DDES-AC performs better owing to the decrease of grey area between the strong shear layer and the fully three-dimensional separated flow.Moreover,the effects of the undulating leading-edge on the forces,lift gradients,and instantaneous flow structures are explored.Compared with the uncontrolled case,the lift gradient in the primary dynamic stall is reduced from 18.4 to 8.5,and the secondary dynamic stall disappears.Therefore,periodic unsteady air-loads are also reduced.Additionally,the control mechanism of the wavy leading edge(WLE)is also investigated by comparison with the straight leading edge(SLE).No sudden breakdown of strong vortices is the main cause for WLE control.

Donut-like photonic nanojet with reverse energy flow

Photonic nanojets(PNJs)are subwavelength jet-like propagating waves generated by illuminating a dielectric microstructure with an electromagnetic wave,conventionally a linearly polarized plane wave.Here,we study the donut-like PNJ produced when a circularly polarized vortex beam is used instead.This novel PNJ also has a reverse energy flow at the donut-like focal plane depending on both the optical vortex topological charge and microsphere size.Our tunable PNJ,which we investigate numerically and analytically,can find applications in optical micromanipulation and trapping.

Revised Three-Dimensional Navier-Stokes Characteristic Boundary Conditions for Intense Reactive Turbulence

The three-dimensional Navier-Stokes characteristic boundary conditions(3D-NSCBC), although physically reasonable and popular in many applications, may encounter the instability problem in simulating complex flows, especially for large Reynolds number reactive turbulence where locally the strong reversed flow appears at the outflow boundary surfaces. In the present work, a revised 3D-NSCBC strategy is proposed based on the kinematic relation in different moving coordinate systems. Following this strategy, a systematic formulation is presented for the outflow surface with local reversed flow and can be easily extended to the coupled edge and corner boundaries. Direct numerical simulation(DNS) tests of flow with different turbulence intensities are carried out. Compared with the conventional 3D-NSCBC, the newly proposed method exhibits satisfactory performance to confine numerical instability in the strong reversed flow region. The results confirm the robustness and effectiveness of this newly proposed algorithm.

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.

POINTWISE AND UPWIND DISCRETIZATIONS OF SOURCE TERMS IN OPEN-CHANNEL FLOOD ROUTING

Upwind algorithms are becoming progressively popular for river flood routing due to their capability of resolving trans-critical flow regimes. For consistency, these algorithms suggest natural upwind discretization of the source term, which may be essential for natural channels with irregular geometry. Yet applications of these upwind algorithms to natural river flows are rare, and in such applications the traditional and simpler pointwise, rather than upwind discretization of the source term is used. Within the framework of a first-order upwind algorithm, this paper presents a comparison of upwind and pointwise discretizations of the source term. Numerical simulations were carried out for a selected irregular channel comprising a pool-riffle sequence Jn the River Lune, England with observed data. It is Shown that the impact of pointwise discretization, compared to the upwind, is appreciable mainly in flow zones with the Froude number closer to or larger than unity. The discrepancy due to pointwise and upwind discretizations of the source term is negligible in flow depth and hence in water surface elevation, but well manifested in mean velocity and derived flow quantities. Also the occurrence of flow reversal and equalisation over the pool-riffle sequence in response to increasing discharges is demonstrated.

Venturi-type fluidic sampler for liquid-solid mixtures

Static-type samplers are required for sampling corrosive, toxic, high-temperature, or radioactive liquid-solid fluids. We have designed a compact reverse flow diverter pumping system for transferring liquid-solid mixtures. In accordance with the Venturi principle, an acceptable volume of liquid-solid fluid is automatically collected into a sampling bottle. The effects of sampling needle sizes, sectional area of the T-section, solid concentration, and liquid viscosity on the performance of fluidic samplers were experi- mentally investigated. The sample volume increased upon the reduction of the sampling needle length and the increase of the sectional area of the T-section, but decreased with the increase of solid concentration and liquid viscosity. Unbiased samples of acceptable volume were produced by the proposed fluidic sampler, even at 10.21 mPa s liquid viscosity, 35 wt% solid concentration, and 6.74 m sampling height.