Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial sourc...Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.展开更多
Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization.During the polymerization process,the molecular weight distri...Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.展开更多
Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB ...Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.展开更多
Effective molecularly imprinted membranes(MIMs) were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid(p-HB) from acetylsalicylic acid(ASA, aspirin). The MIMs were grafted suc...Effective molecularly imprinted membranes(MIMs) were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid(p-HB) from acetylsalicylic acid(ASA, aspirin). The MIMs were grafted successfully from poly(vinylidene fluoride) microfiltration membranes via reversible addition-fragmentation chain transfer(RAFT) polymerization. The graft copolymerization of acrylic acid(AA) in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer(MIP) film coated membranes. The obtained MIMs were characterized by scanning electron microscopy(SEM), Fourier transform infrared spectrophotometer(FTIR) and Raman spectra, and batch mode adsorption studies were carried ont to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin. Keywords Acetylsalicylic acid; Reversible addition-fragmentation chain transfer; Molecularly imprinted membrane; p-Hydroxybenzoic acid; Selective adsorption展开更多
Surface molecularly imprinted polymers (SMIP) was prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization on the chloromethyl polystyrene resin (CPR) in the presence of the templa...Surface molecularly imprinted polymers (SMIP) was prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization on the chloromethyl polystyrene resin (CPR) in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.展开更多
The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacr...The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose)( P( DEGMA-co-VAG)) with narrow polydispersity( PDI) and thermosensitivity was prepared by reversible addition-fragmentation chain transfer( RAFT)polymerization. P( DEGMA-co-VAG) was characterized by1 H NMR,FTIR and gel permeation chromatography( GPC). The characterization of UV-visible spectroscopy showed that the micelles from glycopolymer P( DEGMA-co-VAG) were thermo-responsive and the low critical solution temperature( LCST) could be controlled by the molar ratio of monomers. When the molar ratio of DEGMA and VAG was 2∶ 1,the LCST of P( DEGMA-co-VAG) was36 ℃ in aqueous solution,which could form nano micelles in the human body environment. It was found that P( DEGMA-co-VAG)was non-toxic at 0. 1-1 mg / m L concentrations when incubated with pig iliac endothelial cells( PIECs) for 24 h. Thus,the synthesized glycopolymers has great potential as drug delivery carriers.展开更多
Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl d...Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl dithiobenzoate (PEDB) under low ratio of RAFT agent to initiator. The kinetic model was developed to predict polymerization rate, which indicates that the RAFT polymerization of St is a first-order reaction. In the range of experimental conversions, the plots of -ln(1-x) against time t are approximately linear (x is monomer conversion). The kinetic study reveals the existence of strong rate retardation in RAFT polymerization of styrene. A coefficient K_r is defined to estimate the rate retardation in the RAFT system considering the assumption that the retardation in polymerization rate is mainly attributed to slow fragmentation of the intermediate radicals. K_r relates to the structure of RAFT agents as well as the concentrations of RAFT agent and azobis isobutyronitrile (AIBN). For a certain RAFT agent, the value of K_r is enhanced by the increase in the initial concentration of RAFT agent and the higher ratio of RAFT to AIBN. With the same recipe for different RAFT agents, the increasing trend for the values of K_r is BDB<PEDB<CDB.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.11475246 and 11175234)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02030205)
文摘Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.
基金supported by Major Program of National Natural Science Foundation of China(No. 20836007)National Natural Science Foundation of China(No.20806067).
文摘Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.
文摘Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.
基金Supported by the National Natural Science Foundation of China(No.21606099), the Natural Science Foundation of Jilin Province, China(No.20180623042TC) and the Science and Technology Research Foundation of the Department of Education of Jilin Province, China(Nos. JJKH20180 782KJ, JJKH20180761K J, JJKH20170376K J).
文摘Effective molecularly imprinted membranes(MIMs) were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid(p-HB) from acetylsalicylic acid(ASA, aspirin). The MIMs were grafted successfully from poly(vinylidene fluoride) microfiltration membranes via reversible addition-fragmentation chain transfer(RAFT) polymerization. The graft copolymerization of acrylic acid(AA) in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer(MIP) film coated membranes. The obtained MIMs were characterized by scanning electron microscopy(SEM), Fourier transform infrared spectrophotometer(FTIR) and Raman spectra, and batch mode adsorption studies were carried ont to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin. Keywords Acetylsalicylic acid; Reversible addition-fragmentation chain transfer; Molecularly imprinted membrane; p-Hydroxybenzoic acid; Selective adsorption
文摘Surface molecularly imprinted polymers (SMIP) was prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization on the chloromethyl polystyrene resin (CPR) in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.
基金National Natural Science Foundation of China(No.21303014)
文摘The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose)( P( DEGMA-co-VAG)) with narrow polydispersity( PDI) and thermosensitivity was prepared by reversible addition-fragmentation chain transfer( RAFT)polymerization. P( DEGMA-co-VAG) was characterized by1 H NMR,FTIR and gel permeation chromatography( GPC). The characterization of UV-visible spectroscopy showed that the micelles from glycopolymer P( DEGMA-co-VAG) were thermo-responsive and the low critical solution temperature( LCST) could be controlled by the molar ratio of monomers. When the molar ratio of DEGMA and VAG was 2∶ 1,the LCST of P( DEGMA-co-VAG) was36 ℃ in aqueous solution,which could form nano micelles in the human body environment. It was found that P( DEGMA-co-VAG)was non-toxic at 0. 1-1 mg / m L concentrations when incubated with pig iliac endothelial cells( PIECs) for 24 h. Thus,the synthesized glycopolymers has great potential as drug delivery carriers.
文摘Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl dithiobenzoate (PEDB) under low ratio of RAFT agent to initiator. The kinetic model was developed to predict polymerization rate, which indicates that the RAFT polymerization of St is a first-order reaction. In the range of experimental conversions, the plots of -ln(1-x) against time t are approximately linear (x is monomer conversion). The kinetic study reveals the existence of strong rate retardation in RAFT polymerization of styrene. A coefficient K_r is defined to estimate the rate retardation in the RAFT system considering the assumption that the retardation in polymerization rate is mainly attributed to slow fragmentation of the intermediate radicals. K_r relates to the structure of RAFT agents as well as the concentrations of RAFT agent and azobis isobutyronitrile (AIBN). For a certain RAFT agent, the value of K_r is enhanced by the increase in the initial concentration of RAFT agent and the higher ratio of RAFT to AIBN. With the same recipe for different RAFT agents, the increasing trend for the values of K_r is BDB<PEDB<CDB.