Effects of Andrade and Burgers rheologies on glacial isostatic adjustment modeling in Antarctica

Variations in ice mass deform the Earth and modify its gravity field,a process known as Glacial Isostatic Adjustment(GIA).GIA in Antarctica remains poorly constrained due to the cumulative effect of past and present ice-mass changes,the unknown history of the past ice-mass change,and the uncertainties on the mechanical properties of the Earth.This paper investigates the effect of using Andrade and Burgers viscoelastic rheologies,rather than the commonly used Maxwell rheology,to model GIA-induced deformation in Antarctica.The Love number and Green's function formalism are used to compute the radial surface displacements and the gravity changes induced by the past and present ice-mass changes.We consider an Earth model whose elastic properties and radial structure are averaged from the Preliminary Reference Earth Model and two viscosity profiles to account for the recently published results on the present ice-mass changes.Using the three rheological laws affects the temporal response of the Earth differently,leading to smaller discrepancies than those induced by the two viscosity structures.The differences are the largest between Maxwell and Burgers rheologies during the 100-1000 years following the beginning of the surface-mass change.Results show that using the Andrade and Burgers rheologies allows the Earth to respond on decennial to centennial time scales,up to 10 m more than Maxwell.Considering only the recent ice-mass changes,the deformation rates derived from Burgers and Andrade rheologies are several times larger than those estimated by Maxwell rheology.

Unraveling the Rheology of Nanocellulose Aqueous Suspensions:A Comprehensive Study on Biomass-Derived Nanofibrillated Cellulose

The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.

Finite Deformation, Finite Strain Nonlinear Dynamics and Dynamic Bifurcation in TVE Solids with Rheology

This paper presents a mathematical model consisting of conservation and balance laws (CBL) of classical continuum mechanics (CCM) and ordered rate constitutive theories in Lagrangian description derived using entropy inequality and the representation theorem for thermoviscoelastic solids (TVES) with rheology. The CBL and the constitutive theories take into account finite deformation and finite strain deformation physics and are based on contravariant deviatoric second Piola-Kirchhoff stress tensor and its work conjugate covariant Green’s strain tensor and their material derivatives of up to order m and n respectively. All published works on nonlinear dynamics of TVES with rheology are mostly based on phenomenological mathematical models. In rare instances, some aspects of CBL are used but are incorrectly altered to obtain mass, stiffness and damping matrices using space-time decoupled approaches. In the work presented in this paper, we show that this is not possible using CBL of CCM for TVES with rheology. Thus, the mathematical models used currently in the published works are not the correct description of the physics of nonlinear dynamics of TVES with rheology. The mathematical model used in the present work is strictly based on the CBL of CCM and is thermodynamically and mathematically consistent and the space-time coupled finite element methodology used in this work is unconditionally stable and provides solutions with desired accuracy and is ideally suited for nonlinear dynamics of TVES with memory. The work in this paper is the first presentation of a mathematical model strictly based on CBL of CCM and the solution of the mathematical model is obtained using unconditionally stable space-time coupled computational methodology that provides control over the errors in the evolution. Both space-time coupled and space-time decoupled finite element formulations are considered for obtaining solutions of the IVPs described by the mathematical model and are presented in the paper. Factors or the physics influencing dynamic response and dynamic bifurcation for TVES with rheology are identified and are also demonstrated through model problem studies. A simple model problem consisting of a rod (1D) of TVES material with memory fixed at one end and subjected to harmonic excitation at the other end is considered to study nonlinear dynamics of TVES with rheology, frequency response as well as dynamic bifurcation phenomenon.

Effect of Gum Arabic from Acacia senegal var. kerensis as an Improver on the Rheological Properties of Wheat Flour Dough

Dough improvers are substances with functional characteristics used in baking industry to enhance dough properties. Currently, the baking industry is faced with increasing demand for natural ingredients owing to increasing consumer awareness, thus contributing to the rising demand for natural hydrocolloids. Gum Arabic from Acacia senegal var. kerensis is a natural gum exhibiting excellent water binding and emulsification capacity. However, very little is reported on how it affects the rheological properties of wheat dough. The aim of this study was therefore, to determine the rheological properties of wheat dough with partial additions of gum Arabic as an improver. Six treatments were analyzed comprising of: flour-gum blends prepared by adding gum Arabic to wheat flour at different levels (1%, 2% and 3%), plain wheat flour (negative control), commercial bread flour and commercial chapati flour (positive controls). The rheological properties were determined using Brabender Farinograph, Brabender Extensograph and Brabender Viscograph. Results showed that addition of gum Arabic significantly (p chapati. These findings support the need to utilize gum Arabic from Acacia senegal var. kerensis as a dough improver.

Rheological Characterization of Systems with Plastic Flow Behavior

Model suspensions with plastic flow behavior were investigated rheologically.Shear stress and first normal stress difference were measured simultaneously with shear flow start-up experiments.After the shear deformation is stopped,the stress relaxation begins,residual shear stress can appear.The relative residual shear stressτRR is the ratio of the residual shear stress to the steady state shear stress.The relative residual shear stress is considered as a measure of the structure of the system.In the case ofτRR=0.98,we assume that an elastic to plastic deformation is occurred,which is the yield point.The system with 7.5%Aerosil 380 has achieved withτRR=0.95 in the first approximation the transition to plastic flow,this is the yield point for the system,with a yield stress of 23 Pa.This is the only one known system with yield point.The systems withτRR>0.30 andτRR<0.95 at the first point,have no transition from elastic to plastic flow,but the structure is strongly destroyed.Analogous to the above,the shear stress at this point will be called yield stress.One requirement is that the start-up experiment is determined with a very low shear rate¾0.00071/s or 0.000961/s.The associated normal stress to the yield stress is called normal yield stress.The dependence of the normal stress of the systems with Aerosil 380 on the shear stress reached,after a short increase/decrease in the values,the straight line of the normal stress/shear stress of the liquid phase M20000.A linear relationship between normal stress and shear stress was found in the systems with Bentone 27 in Araldite GY260.With a certain measured normal stress/shear stress point,you can draw a straight line with 45°in the double logarithmic plot¾a way to receive the normal stress/shear stress points.

Effects of stress conditions on rheological properties of granular soil in large triaxial rheology laboratory tests

In order to study the rheological properties of red stone granular soil,a series of rheological experiments were executed on large tri-axial rheological apparatus.Under 100,200 and 300 kPa confining stress conditions,the rheological tests were carried out.These experiment results showed that the stress conditions,especially the stress level were the critical influencing factors of the rheological deformation properties.Under the low stress level(S=0.1),the granular soil showed the elastic properties,and there was no obvious rheological deformation.Under the middle stress level(0.2<S≤0.6),creep curves showed the linear viscoelastic rheological properties.However,under the high stress level(S>0.8) creep curves showed the non-linear viscous plastic rheological properties.Especially,under the stress level of S=1.0,the accelerated rheological phase of creep curves occurred at early time with a trend of failure.The stress level had obvious effects on the final rheological deformation of the soil sample,and the final rheological deformation increments nonlinearly increased with stress level.The final rheological deformation increment and step was little under low stress level,while it became large under high stress level,which showed the nonlinearly rheological properties of the granular soil.The confining pressure also had direct effects on final rheological deformation,and the final rheological deformation linearly increased with confining pressure increments.

Tribological and rheological performance of lithium grease with poly-a-olefin and alkyl-tetralin as base oils

A new category of lithium greases was synthesized by using poly-a-olefin(PAO8) and alkyl-tetralin as base oil, where the alkyl-tetralins were synthesized by the alkylation of tetralin and olefins. The influence of thickener concentration, alkyl-tetralin content and type of blend oils on the rheological and tribological performance of lithium grease was investigated. The microstructures of soap fibers were measured to reveal the structure-property correlations. The concentration of thickener and alkyl-tetralin content obviously affect the lubricating performance of lithium grease, while the molecular structure of alkyltetralin has no obvious impact on their properties. It was found that alkyl-tetralin could significantly enhance the thickening ability of PAO8 base oils, and decrease the amount of thickeners by 1.5%(mass).Lithium greases prepared using 20%(mass) alkyl-tetralin as co-base oil exhibited high colloidal stability,excellent rheological behaviors and tribological properties.

Rheological properties of a multiscale granular system during mixing of cemented paste backfill:A review

The technology of cemented paste backfill(CPB)is an effective method for green mining.In CPB,mixing is a vital process aiming to prepare a paste that meets the non-stratification,non-segregation,and non-bleeding requirements.As a multiscale granular system,homogenization is one of the challenges in the paste-mixing process.Due to the high shearing,high concentration,and multiscale characteristics,paste exhibits complex rheological properties in the mixing process.An overview of the mesomechanics and structural evolution is presented in this review.The effects of various influencing factors on the paste's rheological properties were investigated,and the rheological models of the paste were outlined from the macroscopic and mesoscopic levels.The results show that the mechanical effects and structural evolution are the fundamental factors affecting the rheological properties of the paste.Existing problems and future development trends are presented to change the practice where the CPB process comes first and the theory lags.

Effect of Oils on SBS Modified Asphalt:Rheological Characteristics and Oxidation Aging

This study focuses on the effect of oils on rheology and oxidation aging of Styrene-Butadiene-Styrene modified asphalt(SBSMA)in the long term,after reducing one low-temperature Performance Grade(PG)of SBSMA by incorporating oils.Two oils,including corn-based bio-oil and re-refined engine oil bottom(REOB),were selected to enhance the low-temperature performance of SBSMA.All samples were subjected to Rolling Thin Film Oven(RTFO)aging and 20-h as well as 40-h Pressure Aging Vessel(PAV20 and PAV40)aging,prior to multiple stress creep recovery(MSCR),frequency sweep and Flourier transform infrared spectroscopy(FTIR)scanning.A good high-temperature performance of oil/SBS modified asphalt blends was reflected in MSCR and PG results,meanwhile non-recoverable creep compliance(Jnr)and recovery(R)were found to share a highly correlated relationship during aging progress.In addition,Glover–Rowe(G–R)parameter and phase angle master curves suggest that the improvement of cracking property mainly came from the softening effect of oils.Adding oils into SBSMA was observed to increase oxidation kinetics,but the blends with oils still exhibited better anti-oxidation aging than the base binder,mainly due to the SBS addition.Bio-oil exhibited an effect of relieving age hardening susceptibility of SBSMA.

Physicochemical,rheological and antioxidant profiling of yogurt prepared from non-enzymatically and enzymatically hydrolyzed potato powder under refrigeration

Evidences show that the storage period greatly affects the quality of yogurt.In this study,three types of yogurt:control yogurt(CY),non-hydrolyzed potato powder yogurt(PPY)and enzymatically hydrolyzed potato powder yogurt(EHPPY)were prepared at 42℃ for 5 h and stored for 28 days at 4℃.The yogurts were evaluated for quality characteristics at different storage periods.Negligible differences in pH values,titratable acidities and viable counts were detected in all three types of yogurt during storage.However,compared to other yogurts,EHPPY exhibited desirable water holding capacity,throughout the storage period.Apart from this,sensory properties and antioxidant activities(2-diphenyl-1-picryl-hydrazyl(DPPH)free radical scavenging activity and ferric reducing antioxidant power(FRAP))of EHPPY were also significantly improved during the storage period.Furthermore,the storage(G’)and loss(G”)modulus of PPY,EHPPY were lower than CY at 4℃ while a hysteresis loop was shown by all yogurts at the temperature range of 4-50℃ indicating higher G’(elasticity)than G”(viscosity).Based on our findings,EHPP could be an important functional ingredient in improving the quality and storage stability of yogurt for its production at an industrial level.

Rheology of a Viscous-Plastic Liquid in a Porous Medium

The hydrodynamics of the capillary flow of a viscous-plastic liquid in cylindrical rectilinear pores is considered, as a result of which the structural velocity distribution over the pore cross section is obtained. Analytical solutions are proposed for the equations of hydraulic diffusion and nonlinear filtration for a non-Newtonian fluid in a cylindrical porous medium. It is noted that when a non-Newtonian fluid flows in a porous medium, the filtration equations take a nonlinear form due to the effective viscosity, shear, and yield stresses taken into account in its structure. The proposed solutions make it possible to evaluate the state of the porous medium and its main parameters (permeability, hydraulic diffusion, and effective viscosity coefficients). The obtained solutions are compared with existing experimental data for non-Newtonian oils.

Creep experiment and rheological model of deep saturated rock

By the methods of uniaxial single-stage loading and graded incremental cyclic loading, the creep experiments were performed on the deep saturated rock from Dongguashan Mine, and the creep curves of saturated rock under different loading stresses were obtained. By comparing with the creep rule of dry rock in the same location, the creep rule of deep saturated rock was analyzed. Based on the united rheological mechanical model, the rheological model of deep saturated rock was recognized, and the parameters of the model were determined. The results show that the creep curves are very smooth under low stress, but the phenomena of wave and catastrophe turn up under high stress, and the bearing capacity of rock is weakening over time. The rheological properties of saturated and dry rocks are very different under tlie condition of deep high stress, especially when unloading, degradation and damage of rock quality is more serious, and the effect of water cannot be neglected. The H--HIN--NJS model （Schofield-Scott-Blair model） was selected to represent the rheology rule of deep saturated rock, and the fitting curves of model agree well with the experiment data, so the selected model is reasonable.

Coupled effect of cement hydration and temperature on rheological properties of fresh cemented tailings backfill slurry

The fluidity of fresh cemented tailings backfill（CTB） slurry depends on its rheological properties. Hence, it is crucial to understand the rheology of fresh CTB slurry, which is related to the cement hydration progress and temperature evolution within CTB mixtures. For this reason, a numerical model was developed to predict the evolution of the rheological properties of fresh CTB slurry under the coupled effect of cement hydration and temperature. Experiments were conducted to investigate the rheological behaviours of the fresh CTB slurry. By comparing the simulated results with the experimental ones, the availability of this developed model was validated. Thereafter, the model was used to demonstrate the coupled effect of cement hydration and temperature on the evolution of fresh CTB slurry＇s rheological properties, under various conditions（initial CTB temperature, cement to tailings ratio, and water to cement ratio）. The obtained results are helpful to better understanding the rheology of CTB slurry.

Engineering Nano/Microscale Chiral Self‑Assembly in 3D Printed Constructs

Helical hierarchy found in biomolecules like cellulose,chitin,and collagen underpins the remarkable mechanical strength and vibrant colors observed in living organisms.This study advances the integration of helical/chiral assembly and 3D printing technology,providing precise spatial control over chiral nano/microstructures of rod-shaped colloidal nanoparticles in intricate geometries.We designed reactive chiral inks based on cellulose nanocrystal(CNC)suspensions and acrylamide monomers,enabling the chiral assembly at nano/microscale,beyond the resolution seen in printed materials.We employed a range of complementary techniques including Orthogonal Superposition rheometry and in situ rheo-optic measurements under steady shear rate conditions.These techniques help us to understand the nature of the nonlinear flow behavior of the chiral inks,and directly probe the flow-induced microstructural dynamics and phase transitions at constant shear rates,as well as their post-flow relaxation.Furthermore,we analyzed the photo-curing process to identify key parameters affecting gelation kinetics and structural integrity of the printed object within the supporting bath.These insights into the interplay between the chiral inks self-assembly dynamics,3D printing flow kinematics and photopolymerization kinetics provide a roadmap to direct the out-of-equilibrium arrangement of CNC particles in the 3D printed filaments,ranging from uniform nematic to 3D concentric chiral structures with controlled pitch length,as well as random orientation of chiral domains.Our biomimetic approach can pave the way for the creation of materials with superior mechanical properties or programable photonic responses that arise from 3D nano/microstructure and can be translated into larger scale 3D printed designs.

Study on the rheology of coal-oil slurries during heating at high pressure

Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry （FCC） generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar （CT） will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent （CT） is stronger than that in non-polar solvent （FCC）. The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.

Eco-friendly calcium alginate microspheres enable enhanced profile control and oil displacement

Polymer microspheres(PMs),such as polyacrylamide,have been widely applied for enhanced oil recovery(EOR),yet with environmental concerns.Here,we report a microfluid displacement technology containing a bio-based eco-friendly material,i.e.,calcium alginate(CaAlg)microspheres for EOR.Two dominant mechanisms responsible for EOR over Ca Alg fluid have been verified,including the microscopic oil displacement efficacy augmented by regulating capillary force(determined by the joint action of interfacial tension and wettability between different phases)and macroscopic sweep volume increment through profile control and mobility ratio reduction.This comprehensive effectiveness can be further impacted when the CaAlg microsphere is embellished ulteriorly by using appropriate amount of sodium dodecyl sulfonate(SDS).The core flooding and nuclear magnetic resonance(NMR)tests demonstrate that CaAlg-SDS microsphere can balance the interphase property regulation(wettability alteration and IFT reduction)and rheology properties,enabling simultaneous profile control and oil displacement.Excessive introduction of SDS will have a negative impact on rheological properties,which is not favored for EOR.Our results show that the involvement of 4-m M SDS will provide the best behavior,with an EOR rate of 34.38%.This cost-effective and environmentally-friendly bio-microspherebased microfluidic displacement technology is expected to achieve“green”oil recovery in future oilfield exploitation.

Particle aggregation and breakage kinetics in cemented paste backfill

The macroscopic flow behavior and rheological properties of cemented paste backfill(CPB)are highly impacted by the inherent structure of the paste matrix.In this study,the effects of shear-induced forces and proportioning parameters on the microstructure of fresh CPB were studied.The size evolution and distribution of floc/agglomerate/particles of paste were monitored by focused beam reflection measuring(FBRM)technique,and the influencing factors of aggregation and breakage kinetics of CPB were discussed.The results indicate that influenced by both internal and external factors,the paste kinetics evolution covers the dynamic phase and the stable phase.Increasing the mass content or the cement-tailings ratio can accelerate aggregation kinetics,which is advantageous for the rise of average floc size.Besides,the admixture and high shear can improve breaking kinetics,which is beneficial to reduce the average floc size.The chord length resembles a normal distribution somewhat,with a peak value of approximate 20μm.The particle disaggregation con-stant(k_(2))is positively correlated with the agitation rate,and k_(2) is five orders of magnitude greater than the particle aggregation constant(k1).The kinetics model depicts the evolution law of particles over time quantitatively and provides a theoretical foundation for the micromechanics of complicated rheological behavior of paste.

Extrusion 3D printing of carbon nanotube-assembled carbon aerogel nanocomposites with high electrical conductivity

Carbon nanotubes(CNTs)with high aspect ratio and excellent electrical conduction offer huge functional improvements for current carbon aerogels.However,there remains a major challenge for achieving the on-demand shaping of carbon aerogels with tailored micro-nano structural textures and geometric features.Herein,a facile extrusion 3D printing strategy has been proposed for fabricating CNT-assembled carbon(CNT/C)aerogel nanocomposites through the extrusion printing of pseudoplastic carbomer-based inks,in which the stable dispersion of CNT nanofibers has been achieved relying on the high viscosity of carbomer microgels.After extrusion printing,the chemical solidification through polymerizing RF sols enables 3D-printed aerogel nanocomposites to display high shape fidelity in macroscopic geometries.Benefiting from the micro-nano scale assembly of CNT nanofiber networks and carbon nanoparticle networks in composite phases,3D-printed CNT/C aerogels exhibit enhanced mechanical strength(fracture strength,0.79 MPa)and typical porous structure characteristics,including low density(0.220 g cm^(-3)),high surface area(298.4 m^(2)g^(-1)),and concentrated pore diameter distribution(~32.8nm).More importantly,CNT nanofibers provide an efficient electron transport pathway,imparting 3D-printed CNT/C aerogel composites with a high electrical conductivity of 1.49 S cm^(-1).Our work would offer feasible guidelines for the design and fabrication of shape-dominated functional materials by additive manufacturing.

Fluid-Related Performances and Compressive Strength of Clinker-Free Cementitious Backfill Material Based on Phosphate Tailings

Phosphate tailings are usually used as backfill material in order to recycle tailings resources.This study considers the effect of the mix proportions of clinker-free binders on the fluidity,compressive strength and other key performances of cementitious backfill materials based on phosphate tailings.In particular,three solid wastes,phosphogypsum(PG),semi-aqueous phosphogypsum(HPG)and calcium carbide slag(CS),were selected to activate wet ground granulated blast furnace slag(WGGBS)and three different phosphate tailings backfill materials were prepared.Fluidity,rheology,settling ratio,compressive strength,water resistance and ion leaching behavior of backfill materials were determined.According to the results,when either PG or HPG is used as the sole activator,the fluidity properties of the materials are enhanced.Phosphate tailings backfill material activated with PG present the largest fluidity and the lowest yield stress.Furthermore,the backfill material’s compressive strength is considerably increased to 2.9 MPa at 28 days after WGGBS activation using a mix of HPG and CS,all with a settling ratio of only 1.15 percent.Additionally,all the three ratios of binder have obvious solidification effects on heavy metal ions Cu and Zn,and P in phosphate tailings.

Rheo-NMR: A versatile hyphenated technique for capturing molecular dynamics and structure under flow

The general development of Rheo-NMR during the last four decades as well as selective hyphenated apparatuses is presented.Based on different magnet types,the current review is divided into two categories,namely low-field and high-field NMR,while the timedomain NMR is normally applied in the former case and the frequency-domain NMR is adopted in the latter one.Depending on different rheometer cells,it can be further divided into tensile and shear mode Rheo-NMR.The combination of various rheometer cells and NMR facility guarantees our acquisition of molecular level structure and dynamics information under flow conditions,which is crucial for our understanding of the molecular origin of complex fluids.A personal perspective is also presented at last to highlight possible development in this direction.