A simulation model for phasic and phenological development of rice was developed using the scale of physiological development time, based on the ecophysiological development processes. The interaction of daily thermal...A simulation model for phasic and phenological development of rice was developed using the scale of physiological development time, based on the ecophysiological development processes. The interaction of daily thermal effectiveness, photoperiod effectiveness and intrinsic earliness(before heading), and basic filling duration factor(after heading)determined the daily physiological effectiveness, which accumulated to get physiological development time. The Beta and quadratic functions were used to describe daily thermal and photoperiod effectiveness, respectively. Five specific genetic parameters were added to adjust the genotypic differences in rice development so that all different varieties could reach the same physiological development time at a given development stage. The stages of seedling emergence, panicle initiation, heading, and maturity were validated using sowing dates under different ecological environments, with the RMSE of 1. 47, 5. 10, 4.58 and 3.37 days, respectively. The results showed that the model was not only explanatory and systematic but also accurate and applicable.展开更多
A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model w...A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model was calibrated to obtain parameter values using the experimental data of years 2001 and 2002, then the parameters were validated by the data obtained during 2003. For single hybrid rice Liangyoupeijiu, the data recorded in 2004 and 2003 were used for calibration and validation, respectively. The main focus of the study was as follows： the WOFOST model is good in simulating rice potential growth in Zhejiang and can be used to analyze the process of rice growth and yield potential. The potential yield obtained from the WOFOST model was about 8100 kg/ha for late rice and 9300 kg/ha for single rice. The current average yield in Jinhua is only about 78% （late rice） and 70% （single rice） of their potential yield. The results of the simulation also showed that the currant practice of management at the middle and late growth stages of rice should be reexamined and improved to reach optimal rice growth.展开更多
Sheath blight of rice, caused by Rhizoctonia solani AG 1. 1a, has become the most important disease and caused serious yield losses in some major rice-growing regions in China in recent years. In the present study, fi...Sheath blight of rice, caused by Rhizoctonia solani AG 1. 1a, has become the most important disease and caused serious yield losses in some major rice-growing regions in China in recent years. In the present study, field plot experiment was conducted to examine the relationships between disease intensity and inoculum density （ID）, the seasonal disease epidemic dynamics, and yield reductions due to disease damages. Results from the experiment demonstrated that the areas under progress curves of disease severity and those of percent rice tillers diseased were positively and closely related to the relative initial ID of the pathogen. The inoculum density-disease （IDD） relationships were simulated and the impractical linear models were obtained. Both logistic and Gompertz functions could be used to simulate the disease progress dynamics in time, but the progress curves of the disease severity were modeled better by the Gompertz than by logistic function. However, the Richards function was found to be the best in simulating the disease progress curves when a most appropriate value was chosen for the shape parameter m by using the computer software Epitimulator. Sheath blight infection decreased rice yield very significantly and a yield reduction of 40% was recorded in rice crop with the highest inoculum density. Rice yield was linearly and negatively correlated with the disease severity and the percent tillers affected. The simulated models for all these relationships were computed through executing Epitimulator software and were presented in this paper.展开更多
The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, buildi...The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, building information <span>modeling (BIM) and building energy modeling (BEM) are two important to</span>ols to make the transition to net-zero energy buildings (NZEB). So far, little attention has been devoted, in the literature, to discuss the connection between BIM, BEM, and Life-cycle assessment (LCA), which is the main topic of this article. A literature review of 157 journal articles and conference proceedings published between 1990 and 2020 is presented. This review outlines knowledge gaps concerning BIM, BEM, and environmental impact assessment. It suggests that defining the process with the right technology (at the right time) would result in a more integrated design process (IDP) and bridge current gaps. The most efficient way to improve process and technology is related to the competences of the architects, engineers and constructors (AEC). The review also indicates that the IDP in the early design phases (EDP) is in need of improvement for architects and engineers, where a better connection between design phases, specific levels of development (LOD) and BIM tools is needed. <span>Competences, process and technology are the three main themes addressed in the review. Their relation to design phases and LOD is discussed. The aim </span>is to propose possible solutions to the current hinders in BIM-to-BEM (BIM2BEM) and BIM-for-LCA (BIM4LCA) integration.展开更多
基金supported by the National Natura1 Science Foundation of China(30030090)the National 863 Program,China(2001AA245041)
文摘A simulation model for phasic and phenological development of rice was developed using the scale of physiological development time, based on the ecophysiological development processes. The interaction of daily thermal effectiveness, photoperiod effectiveness and intrinsic earliness(before heading), and basic filling duration factor(after heading)determined the daily physiological effectiveness, which accumulated to get physiological development time. The Beta and quadratic functions were used to describe daily thermal and photoperiod effectiveness, respectively. Five specific genetic parameters were added to adjust the genotypic differences in rice development so that all different varieties could reach the same physiological development time at a given development stage. The stages of seedling emergence, panicle initiation, heading, and maturity were validated using sowing dates under different ecological environments, with the RMSE of 1. 47, 5. 10, 4.58 and 3.37 days, respectively. The results showed that the model was not only explanatory and systematic but also accurate and applicable.
文摘A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model was calibrated to obtain parameter values using the experimental data of years 2001 and 2002, then the parameters were validated by the data obtained during 2003. For single hybrid rice Liangyoupeijiu, the data recorded in 2004 and 2003 were used for calibration and validation, respectively. The main focus of the study was as follows： the WOFOST model is good in simulating rice potential growth in Zhejiang and can be used to analyze the process of rice growth and yield potential. The potential yield obtained from the WOFOST model was about 8100 kg/ha for late rice and 9300 kg/ha for single rice. The current average yield in Jinhua is only about 78% （late rice） and 70% （single rice） of their potential yield. The results of the simulation also showed that the currant practice of management at the middle and late growth stages of rice should be reexamined and improved to reach optimal rice growth.
文摘Sheath blight of rice, caused by Rhizoctonia solani AG 1. 1a, has become the most important disease and caused serious yield losses in some major rice-growing regions in China in recent years. In the present study, field plot experiment was conducted to examine the relationships between disease intensity and inoculum density （ID）, the seasonal disease epidemic dynamics, and yield reductions due to disease damages. Results from the experiment demonstrated that the areas under progress curves of disease severity and those of percent rice tillers diseased were positively and closely related to the relative initial ID of the pathogen. The inoculum density-disease （IDD） relationships were simulated and the impractical linear models were obtained. Both logistic and Gompertz functions could be used to simulate the disease progress dynamics in time, but the progress curves of the disease severity were modeled better by the Gompertz than by logistic function. However, the Richards function was found to be the best in simulating the disease progress curves when a most appropriate value was chosen for the shape parameter m by using the computer software Epitimulator. Sheath blight infection decreased rice yield very significantly and a yield reduction of 40% was recorded in rice crop with the highest inoculum density. Rice yield was linearly and negatively correlated with the disease severity and the percent tillers affected. The simulated models for all these relationships were computed through executing Epitimulator software and were presented in this paper.
文摘The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, building information <span>modeling (BIM) and building energy modeling (BEM) are two important to</span>ols to make the transition to net-zero energy buildings (NZEB). So far, little attention has been devoted, in the literature, to discuss the connection between BIM, BEM, and Life-cycle assessment (LCA), which is the main topic of this article. A literature review of 157 journal articles and conference proceedings published between 1990 and 2020 is presented. This review outlines knowledge gaps concerning BIM, BEM, and environmental impact assessment. It suggests that defining the process with the right technology (at the right time) would result in a more integrated design process (IDP) and bridge current gaps. The most efficient way to improve process and technology is related to the competences of the architects, engineers and constructors (AEC). The review also indicates that the IDP in the early design phases (EDP) is in need of improvement for architects and engineers, where a better connection between design phases, specific levels of development (LOD) and BIM tools is needed. <span>Competences, process and technology are the three main themes addressed in the review. Their relation to design phases and LOD is discussed. The aim </span>is to propose possible solutions to the current hinders in BIM-to-BEM (BIM2BEM) and BIM-for-LCA (BIM4LCA) integration.
