An incipient mechanical fault detection method, combining multifractal theory and Mahalanobis-Taguchi system （MTS）, which is based on statistical technology, is proposed in this paper. Multifractal features of vibra...An incipient mechanical fault detection method, combining multifractal theory and Mahalanobis-Taguchi system （MTS）, which is based on statistical technology, is proposed in this paper. Multifractal features of vibration signals obtained from machine state monitoring are extracted by multifractal spectrum analysis and generalized fractal dimensions. Considering the situation of mass samples of normal mechanical running state and few fault states, the feature parameters corresponding to different mechanical running states are further optimized by a statistical method, based on which incipient faults are subsequently identified and diagnosed accurately. Experimental results proved that the method combining multifractal theory and MTS can be used for incipient fault state recognition effectively during the mechanical running process, and the accuracy of fault state identification is improved.展开更多
Based on remote sensing data, field investigation and trench measurement along the piedmont fault (Wujumengkou Dongfengcun) of Mt. Serteng, the vertical displacement rate has been found to be 0 88～1 83mm/a since the ...Based on remote sensing data, field investigation and trench measurement along the piedmont fault (Wujumengkou Dongfengcun) of Mt. Serteng, the vertical displacement rate has been found to be 0 88～1 83mm/a since the late period of late Pleistocene and 0 89mm/a since the middle period of Holocene. Using the progressive constraining method,five paleoearthquake events have been distinguished from two large trenches since Holocene. They occurred 9000±1300a B.P., 6500±500a B.P., 5770a B.P., 4200±300a B.P. and 3250±250a B.P., respectively. From the late period of late Pleistocene to the beginning of Holocene, some paleoearthquake events may have been missed due to a variety of reasons. All of the paleoearthquake events displayed clustering characteristics to a certain extent. The first cluster was occurred around 8900a B.P., the second cluster occurred between 5700～6500a B.P. and the last cluster was occurred in 3250～4200 a B.P. The interval between the first cluster and the second cluster was about 2400a while that between the second cluster and the third cluster was only 1570a. No earthquake events have cut the ground surface along this active fault segment since 3250a B.P. The lapse time is more than the recurrence interval between two paleoearthquake clusters. Therefore, there is a potential risk for a recurring earthquake along this active fault segment.展开更多
The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces ...The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong （班公）-Nujiang （怒江） sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang （羌塘） terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo （龙木错） and Geerzangbu are inferred.展开更多
The process and result of fractal research of natural fault gouge collected from the active fault zone at northern edge of Western Qinling Mt. by using optical and electronic microscope technics were introduced in thi...The process and result of fractal research of natural fault gouge collected from the active fault zone at northern edge of Western Qinling Mt. by using optical and electronic microscope technics were introduced in this paper. The fractal dimension of this fault gouge is D =2.594±0.122 (2 D plane D =1.594±0.122), and its upper limit of fractal dimension occurs at grain size at 9.6～19.2 mm. The study result shows that this gouge is fractal, and its characteristic displacement parameter of stick slip friction can be determined by upper limit of fractal dimension. The feature of protolith which affect fractality and the significance of gouge fractal to seismic fault changes are also disscussed in the paper.展开更多
There are four types of metamorphic rocks in the Marinwobo fault, i.e, cataclasite, mylonite, mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclasti...There are four types of metamorphic rocks in the Marinwobo fault, i.e, cataclasite, mylonite, mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.展开更多
基金supported by the National High Technology Research and Development Program of China (Grant No. 2008AA06Z209)CNPC Innovation Fund (Grant No. 2006-A)+1 种基金Special Items Fund of Beijing Municipal Commiss ion of EducationProgram for New Century Excellent Talents,Ministry of Education (Grant No. NCET-05-0110)
文摘An incipient mechanical fault detection method, combining multifractal theory and Mahalanobis-Taguchi system （MTS）, which is based on statistical technology, is proposed in this paper. Multifractal features of vibration signals obtained from machine state monitoring are extracted by multifractal spectrum analysis and generalized fractal dimensions. Considering the situation of mass samples of normal mechanical running state and few fault states, the feature parameters corresponding to different mechanical running states are further optimized by a statistical method, based on which incipient faults are subsequently identified and diagnosed accurately. Experimental results proved that the method combining multifractal theory and MTS can be used for incipient fault state recognition effectively during the mechanical running process, and the accuracy of fault state identification is improved.
文摘Based on remote sensing data, field investigation and trench measurement along the piedmont fault (Wujumengkou Dongfengcun) of Mt. Serteng, the vertical displacement rate has been found to be 0 88～1 83mm/a since the late period of late Pleistocene and 0 89mm/a since the middle period of Holocene. Using the progressive constraining method,five paleoearthquake events have been distinguished from two large trenches since Holocene. They occurred 9000±1300a B.P., 6500±500a B.P., 5770a B.P., 4200±300a B.P. and 3250±250a B.P., respectively. From the late period of late Pleistocene to the beginning of Holocene, some paleoearthquake events may have been missed due to a variety of reasons. All of the paleoearthquake events displayed clustering characteristics to a certain extent. The first cluster was occurred around 8900a B.P., the second cluster occurred between 5700～6500a B.P. and the last cluster was occurred in 3250～4200 a B.P. The interval between the first cluster and the second cluster was about 2400a while that between the second cluster and the third cluster was only 1570a. No earthquake events have cut the ground surface along this active fault segment since 3250a B.P. The lapse time is more than the recurrence interval between two paleoearthquake clusters. Therefore, there is a potential risk for a recurring earthquake along this active fault segment.
基金This paper is supported by the National Natural Science Foundation of China (No. 40404006)the Focused Subject Program of Beijing (No. XK104910598).
文摘The magnetotelluric （MT） survey along the Zhada （札达）-Quanshui （泉水） Lake profile on the western margin of the Qinghai （青海）-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong （班公）-Nujiang （怒江） sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang （羌塘） terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo （龙木错） and Geerzangbu are inferred.
文摘The process and result of fractal research of natural fault gouge collected from the active fault zone at northern edge of Western Qinling Mt. by using optical and electronic microscope technics were introduced in this paper. The fractal dimension of this fault gouge is D =2.594±0.122 (2 D plane D =1.594±0.122), and its upper limit of fractal dimension occurs at grain size at 9.6～19.2 mm. The study result shows that this gouge is fractal, and its characteristic displacement parameter of stick slip friction can be determined by upper limit of fractal dimension. The feature of protolith which affect fractality and the significance of gouge fractal to seismic fault changes are also disscussed in the paper.
文摘There are four types of metamorphic rocks in the Marinwobo fault, i.e, cataclasite, mylonite, mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.
