Settlement Control Standards of Construction and Expansion for Mountainous Highway Roadbeds

This article analyzes the differential settlement of new and old roadbeds after widening and its characteristics based on a highway reconstruction and expansion project case study.The research proposes a subgrade settlement control standard that states that the maximum differential settlement value should be less than 5 cm when the embankment fill height exceeds 20 m.Similarly,the maximum differential settlement value should be less than 10 cm when the embankment fill height does not exceed 20 m.The findings of the study can provide a useful reference for the design of roadbed widening in highway reconstruction and expansion projects.

Stress distribution in roadbeds of slab tracks with longitudinal discontinuities

Stress concentration occurs in the foundations of railway tracks where discontinuous components are located.The exacerbated stress under the expansion joints in slab tracks may trigger foundation failures such as mud pumping.Although the higher stress due to the discontinuities of track structures has been discussed in past studies,few focused on the stress response of roadbeds in slab tracks and quantitatively characterized the stress pattern.In this paper,we performed a dynamic finite element analysis of a track-formation system,incorporating expansion joints as primary longitudinal discontinuities.The configurations of CRTS Ⅲ slab tracks and the contact conditions between concrete layers were considered.Numerical results show that longitudinal influencing length of induced stress on roadbed under wheel load relates to the contact conditions between concrete layers,increasing nonlinearly at a larger coefficient of friction.Given a measured coefficient of friction of 0.7,the calculated longitudinal influencing length(9.0 m) matches with field data.The longitudinal influencing length is not affected with the increasing velocity.As stress concentration arises with expansion joints,the worstcase scenario emerges when double-axle loads are exerted immediately above the expansion joints between concrete bases.A stress concentration factor Cvon the roadbed is proposed;it increases with the increasing velocity,changing from 1.33 to 1.52 at velocities between 5 and 400 km/h.The stress distribution on roadbeds transforms from a trapezoid pattern at continuous sections to a triangle pattern at points with longitudinal discontinuities.An explicit expression is finally proposed for the stress pattern on roadbed under expansion joints.Although structural discontinuities induce stress raiser,the extent of concentration is mitigated with increasing depth at different velocity levels.

Analysis of Roadbed Splicing at Hub Interchanges

This article discusses the roadbed splicing for hub interchanges.The article starts with a description of the characteristics of junction roadbed splicing.The application of splicing technology is explained using a subgrade splicing scheme of a project.Roadbed splicing involves stepwise excavation and preparative measures like surface cleaning and backfilling.This article serves to provide a valuable reference for road and bridge construction and improve the quality of China’s road and bridge projects,so as to achieve sustainable development of the road and bridge engineering industry.

Reinforcement Technology for Soft Soil Roadbed in the Widened Section of Expressway Expansion

This article examines the soft soil roadbed reinforcement technology for widened sections of highways in a specific project.It provides an overview of the project,the principles of soft soil roadbed reinforcement technology for wide sections,and its practical application.The analysis aims to offer guidance on applying soft soil roadbed wide section reinforcement technology and enhancing the overall quality of similar projects.

Structural Design of Roadbed and Pavement in Transition Section of Roads and Bridges

As the lifeline of social development,road and bridge projects are the main channel to realize resource transportation and economic circulation.Ensuring the quality of road and bridge project construction is crucial for the development of society,the economy,and people’s livelihoods.This paper studies the design of roadbed pavement structures in road and bridge transition sections.It aims to provide technical references and significance for China’s road and bridge engineering design and construction units,promoting scientific and standardized design in these actions.This will contribute to the safety and stable operation of road and bridge projects,offering effective technical support.Furthermore,it seeks to foster the sustainable and healthy development of China’s road and bridge engineering on a macro level.

Analysis of Roadbed Pavement Designs for Highway Reconstruction and Upgrading

This paper focuses on the route and roadbed pavement design in highway reconstruction and upgrading projects.It discusses the importance of project design for highway reconstruction and upgrading,highlighting key aspects of route design and roadbed pavement design.The analysis reveals that the main design considerations in these projects include controlling factors of route reconstruction,expansion,and upgrading,as well as route plan design and longitudinal section design combined with roadbed pavement.In roadbed pavement design,it is crucial for designers to thoroughly collect existing data and make reasonable use of the current roadbed and pavement to develop a comprehensive design scheme.This analysis aims to provide a reference for the reasonable design of such projects.

Study on Optimization of Design Parameters for Precast Pipe Pile Treatment of Soft Soil Subgrade on the Jianghan Plain

The soft soil in the Jianghan Plain is characterized by a high water content, liquid limit, sensitivity, porosity ratio, and organic matter content and low strength and is commonly known as “five highs and one low” soft soil. Thus, the construction of expressways in this area is likely to cause subgrade settlement. The manuscript investigated the influence of the design parameters of precast pipe piles on the soft ground treatment in the Jianghan Plain based on the case of the soft soil subgrade project of the Xiaogan south section of the Wuhan city ring expressway, China. Midas GTS NX 2019 finite element software was used to analyse the settlement pattern of the subgrade under the variations in pile length, pile spacing and pile diameter. The results show that precast pipe piles are effective in reducing the settlement of soft soil subgrades with a high compressibility and water content;the soft foundation settlement decreases with increasing pile length and pile diameter and decreasing pile spacing. As the pile tip is embedded in the bearing stratum, the settlement of the soft foundation is greatly affected by the variations in pile length and pile spacing while slightly influenced by the variation in pile diameter;in combination with the curve fitting obtained from the real-time monitoring data, the analysis concludes that the soft foundation treatment plan with a pile length of 15 m, pile spacing of 1.2 m to 1.5 m and pile diameter of 0.6 m can better contain the soft soil subgrade settlement in this section.

Analysis of Highway Roadbed Performance Evaluation Technology

With the continuous development of China,the requirements for road construction are also increasing.Among them,strengthening the performance of roadbed test can effectively improve road construction.Besides,it is also crucial to perform suitable tests in a timely manner.Therefore,highway inspection technology should be improved for the continuous development of highway construction,which will be explained in this paper,in hopes of improving the construction of highway in China.

Strengthening long-term embankments maintained on permafrost soils

An analysis of the reasons for the displacements of long-term embankments maintained on permafrost soils indicates that they mainly occur due to plastic deformations in the layer of seasonal freezing and thawing;therefore,the reconstruction of permafrost is not effective in this case.It is proposed to strengthen these embankments with the help of using jet technology for cementation of the top layer of the roadbed.This approach is considered through the example of the deforming embankment on 6,278 km of the Turinskaya-Karymskaya section of the Trans-Siberian Railway.

Mechanical properties of fiber and cement reinforced heavy metal-contaminated soils as roadbed filling

The treatment of contaminated soil is a crucial issue in geotechnical and environmental engineering.This study proposes to incorporate appropriate polypropylene fibers and cements as an effective method to treat heavy metal contaminated soil(HMCS).The objective of this paper is to investigate the effects of fiber content,fiber length,cement content,curing time,heavy metal types and concentration on the mechanical properties of soils.To this end,a series of direct shear test,unconfined compression strength(UCS)test,dry-wet cycle and freeze-thaw cycle test are performed.The results confirm that the appropriate reinforcement of polypropylene fibers and cement is an effective way to recycle HMCS as substitutable fillers in roadbed,which exhibits benefits in environment and economy development.

应用“天然冷”维护寒区环境(英文)

The changes of frozen ground caused by the rising temperature will destroy the heat balance of frozen ground and then damage the roadbeds and foundations in cold area. It is a new idea to collect and store the “natural cold” as a resource and apply it to keep the frozen ground frozen permanently and regulate the summer temperature in cities. This paper introduces the principles and systems used in collecting, storing and transmitting the natural cold , analyses the techniques which keep the frozen ground unchanged and protect the roadbed. The paper also studies the systems and techniques by which the natural cold is used for temperature regulation in cities. And the theories involved in this subject and the prospect of industrializing those techniques are presented as well by the author.

保护多年冻土路基中存在的问题和对策(英文)

Ways of strengthening railway embankment basis on ice-rich permafrost are characterized by regulating cooling and warming factors for preservation of the basis in constantly frozen condition (with the help of snow removal, painting, sun-precipitation shed, cross-section cooling pipes, the film cover, and the longitudinal cooling device) or removing icy masses preventively from the basis and filling the cavities simultaneously with not subsiding soils (with use of jet geotechnology). Skilled-experimental development are shined on the basis of new ways of strengthening embankment basis on ice-rich frozen soils.

Technological risk regulation of the subgrade base stability in permafrost areas

Maintenance and risk estimation of a weak roadbed condition during the construction period are described.Risk-management procedure for unstable,weak soils is proposed through adjusting the technological loads and real-time monitoring of their influence.The efficiency of implementing maximum allowable vibroloads and the drainage system for strengthening weak soils is shown in the example of the Northern Latitudinal Railway area.

多年冻土区铁路路基病害整治(英文)

The paper analysesthe treatment measurementsof railway roadbed main diseases in permafrost regions. Taking lessonsfrom the diseases finallythe mature experiences of treatments are offered.

Design method of pile-slab structure roadbed of ballastless track on soil subgrade

Pile-slab structure roadbed is a new form of ballastless track for high speed railway. Due to lack of corresponding design code, based on the analysis of its structure characteristics and application requirements, it is proposed to carry out load effect combination according to ultimate limit state and serviceability limit state, and the most unfavorable combination of each state is chosen to carry through design calculation for pile-slab structure. Space model of pile-slab structure can be simplified as a plane flame model, by using the orthogonal test method, and the design parameter of pile-slab structure is optimized. Moreover, based on the engineering background of Suining-Chongqing high-speed railway, the dynamic deformation characteristics of pile-slab structure roadbed are further researched by carrying on the indoor dynamic model test. The test results show that the settlement after construction of subgrade satisfies the requirement of settlement control to build ballastless track on soil subgrade for high-speed railway. Slab structure plays the role of arch shell as load is transmitted from slab to pile, and the vertical dynamic stress of subgrade soil is approximately of ＂K＂ form distribution with the depth. The distribution of pile stress is closely related to soil characteristics, which has an upset triangle shape where the large dynamic stress is at the top. Pile compared with soil shares most dynamic stress. Pile structure expands the depth of the dynamic response of subgrade has limited effect on dynamic response. These results can provide subgrade. and improves the stress of subgrade soil, and the speed of train scientific basis for pile-slab structure roadbed used on soil

Permafrost Characteristics of the Qinghai-Tibet Plateau and Methods of Roadbed Construction of Railway

Permafrost along the Qinghai-Tibet railway is featured by abundant ground ice and high ground temperature. Under the influence of climate warming and engineering activities, the permafrost is under degradation process. The main difficulty in railway roadbed construction is how to prevent thawing settlement caused by degradation of permafrost. Therefore the proactively cooling methods based on controlling solar radiation, heat conductivity and heat convection were adopted instead of the traditional passive methods, which is simply increasing thermal resistance. The cooling methods used in the Qinghai-Tibet railway construction include sunshine-shielding roadbeds, crushed rock based roadbeds, roadbeds with rock revetments, duct-ventilated roadbeds, thermosyphon installed roadbeds and land bridges. The field monitored data show that the cooling methods are effective in protecting the underlying permafrost, the permafrost table was uplifted under the embankments and therefore the roadbed stability was guaranteed.

Roadbed behavior subjected to tilting-train loading at rail joint and continuous welded rail

The tilting-train is very attractive to the railroad users in the world due to the advantage of high speed in curved track using pre-existing infrastructure of railway.Tilting-train has a unique allowable speed and mechanism especially in curved track.In this work,when tilting-train is operated with the allowable speed,the behavior of roadbed is evaluated by examining its settlement and bearing capacity.Additionally,the stability of roadbed is estimated as the roadbed is in the condition of soft soil influenced by the weather effects and cyclic train loading.Numerical results show that the roadbed settlement satisfies the allowable settlement when the elastic moduli of upper roadbed and in-situ soil are greater than 3800 and 4600 kN/m2 for rail joint and 2300 and 3300 kN/m2 for continuous welded rail(CWR).

Roadbed, embankment, tower support and culvert stability problems on permafrost

The history of railway and highway construction in permafrost zones in Russia, the United States, Canada, and China spans more than 110 years. Nonetheless, no railway track or highway has yet been built in such area that is impervious to deformation caused by subsidence resulting from the thawing of ice-rich subgrade soils. This paper presents data on the roadbed states of the Trans- baikalian and the Baikal-Amur Railways as well as the Russian ＂AMUR＂ Chita-Khabarovsk Highway. It also discusses the feasi- bility of roadbed stability maintenance using methods based on the reduction of the mean annual ground temperature and roadbed preservation in a permafrost state by means of the natural cooling and heating factors ratio regulation resulting in a reduction of the heat generation in the roadbed and the adjoining area accompanied by an increase of heat consumption with help of the sun-precipitation protective sheds （awnings）, rock covers, dolomite powder （reflective paint）, cooling tube and thermosyphons as well as tower supports and corrugated pipe culverts stability.

Applying the AHP-FUZZY method to evaluate the measure effect of rubble roadbed engineering in permafrost regions of Qinghai-Tibet Plateau: a case study of Chaidaer-Muli Railway

This article attempts to investigate the measure effect of rubble roadbed engineering in permafrost regions of Qinghai-Tibet Plateau. As a case study, Chaidaer-Muli Railway is used to evaluate the measure effect of rubble roadbed engineering in permafrost regions. The AHP(Analytic Hierarchy Process) method is thus employed to establish the evaluation indicator system. The evaluation factor is selected by analyzing the mutual relation between the permafrost environment and roadbed engineering. Thus, a hierarchical structure model is established based on the selected evaluation indices. Each factor is weighted to determine the status in the evaluation system, and grading standards are built for providing a basis for the evaluation. Then, the fuzzy mathematical method is introduced to evaluate the measure effect of rubble roadbed engineering in permafrost regions along the Chadaer-Muli Railway. Results show that most of the permafrost roadbed is in a preferable condition(b) along the Chaidaer-Muli Railway due to rubble engineering measures. This proportion reaches to 86.1%. The proportion in good(a), general(c) and poor states(d) are 0.0%, 7.5% and 6.4%, respectively, in all the evaluation sections along the Chaidaer-Muli Railway. Ground-temperature monitoring results are generally consistent with AHP-FUZZY evaluation results. This means that the AHP-FUZZY method can be applied to evaluate the effect of rubble roadbed engineering measures in permafrost regions. The effect evaluation of engineering measures will provide timely and effective feedback information for further engineering design. The series of engineering measures will more effectively protect permafrost stability.

Numerical simulation of roadbed slope under seismic action in permafrost regions

The deformation and strength characteristics of roadbed slope under seismic loading in permafrost regions are simulated numerically. The seismic response of roadbed at different positions and inclinations of a slope section was analyzed. Results show that, roadbed slope damage is mainly led by lateral displacement, and the deformation gradually decreases with increasing depth; roadbed and foundation displacement and plastic strain increases with the magnitude of slope angle, hence the roadbed safety factor will be reduced.