Slope structures and formation of rock–soil aggregate landslides in deeply incised valleys

Rock–soil aggregate landslides(RSALs) are a common geological hazard in deeply incised valleys in southwestern China. Large-scale RSALs are widely distributed in the upper reaches of the Dadu River, Danba County, Sichuan Province, and are influenced by slope structure, which can be divided into open, lock, strip, and dumbbell types, as well as soil type and meso-structure, which can be classified as layered rock–soil aggregate, block-soil, and grainsoil. In this study, the evolution of four types of structures, such as layered-dumbbell, block-soil lock, banded block-soil, and block-soil open types, were analyzed by field surveys, surface and deep displacement monitoring, and Flac3 D. It was found that the Danba reach of the Dadu River showed incised valley through the evolution from wide to slow valley affected by internal and external geological processes since the Quaternary Glaciation. In the layered-dumbbell rock–soil aggregate, the main sliding pattern is multi-stage sliding at different depths. Circular sliding in the trailing edge and plane sliding along the bedrock in the front edge body occurin the block-soil-lock type aggregate. Large-scale multi-level and circular sliding over long distances occur in the banded block-soil aggregate. The blocksoil open type is stable, with only circular sliding occurring in local and shallow surfaces of the body. The monitoring and numerical simulation results further show that slope structure and regularity have diversified with RSALs. The results provide a basis for analyzing the stability mechanism of RSALs and preventing RSALs in deeply incised valleys.

Attenuation of rock blasting induced ground vibration in rock-soil interface

Blasting has been widely used in mining and construction industries for rock breaking.This paper presents the results of a series of field tests conducted to investigate the ground wave propagation through mixed geological media.The tests were conducted at a site in the northwestern part of Singapore composed of residual soil and granitic rock.The field test aims to provide measurement data to better understand the stress wave propagation in soil/rock and along their interface.Triaxial accelerometers were used for the free field vibration monitoring.The measured results are presented and discussed,and empirical formulae for predicting peak particle velocity (PPV) attenuation along the ground surface and in soil/rock were derived from the measured data.Also,the ground vibration attenuation across the soil-rock interface was carefully examined,and it was found that the PPV of ground vibration was decreased by 37.2% when it travels from rock to soil in the vertical direction.

Determination Method for Shear Strength Parameters of Rock-Soil Mixtures Using Close-Range Photogrammetry and 3-D Limit Equilibrium Theory

Using a combination of close-range photogrammetry and three-dimensional(3-D) limit equilibrium theory, a determination method for the shear strength parameters of rock-soil mixture is presented. A close-range photogrammetry method is used for measurement of the 3-D terrain of the experimental target. Auto CAD Lisp and EXCEL VBA are used to perform 3-D limit equilibrium analysis of the stability of sliding mass and perform backanalysis of shear strength parameters. The presented method was used to determine the shear strength parameters of rock-soil mixtures at the Liyuan Hydropower Station. The 3-D terrain of sliding surface could be measured notably well using of closerange photogrammetry. The computed results reveal that the cohesion and friction angle of rock-soil mixtures were 3.15 k Pa and 29.88o for test A, respectively, and 4.43 k Pa and 28.30o for test B, respectively, within the range of shear strength parameters, as determined by field and laboratory tests. The computation of shear strength parameters is influenced by the mesh grid number, especially the cohesion of the rock-soil mixture. The application of close-range photogrammetry can reduce the siteworks and improve the computational efficiency and accuracy.

Identification on rock and soil parameters for vibration drilling rock in metal mine based on fuzzy least square support vector machine

A single freedom degree model of drilling bit-rock was established according to the vibration mechanism and its dynamic characteristics. Moreover, a novel identification method of rock and soil parameters for vibration drilling based on the fuzzy least squares(FLS)-support vector machine(SVM) was developed, in which the fuzzy membership function was set by using linear distance, and its parameters, such as penalty factor and kernel parameter, were optimized by using adaptive genetic algorithm. And FLS-SVM identification on rock and soil parameters for vibration drilling was made by changing the input/output data from single freedom degree model of drilling bit-rock. The results of identification simulation and resonance column experiment show that relative error of natural frequency for some hard sand from identification simulation and resonance column experiment is 1.1% and the identification precision based on the fuzzy least squares-support vector machine is high.

THEORETICAL MODEL OF EFFECTIVE STRESS COEFFICIENT FOR ROCK/SOIL-LIKE POROUS MATERIALS

Physical mechanisms and influencing factors on the effective stress coefficient for rock/soil-like porous materials are investigated, based on which equivalent connectivity index is proposed. The equivalent connectivity index, relying on the meso-scale structure of porous material and the property of liquid, denotes the connectivity of pores in Representative Element Area （REA）. If the conductivity of the porous material is anisotropic, the equivalent connectivity index is a second order tensor. Based on the basic theories of continuous mechanics and tensor analysis, relationship between area porosity and volumetric porosity of porous materials is deduced. Then a generalized expression, describing the relation between effective stress coefficient tensor and equivalent connectivity tensor of pores, is proposed, and the expression can be applied to isotropic media and also to anisotropic materials. Furthermore, evolution of porosity and equivalent connectivity index of the pore are studied in the strain space, and the method to determine the corresponding functions in expressions above is proposed using genetic algorithm and genetic programming. Two applications show that the results obtained by the method in this paper perfectly agree with the test data. This paper provides an important theoretical support to the coupled hydro-mechanical research.

Failure behavior of soil-rock mixture slopes based on centrifuge model test

The stability of soil-rock mixtures(SRMs) that widely distributed in slopes is of significant concern for slope safety evaluation and disaster prevention. The failure behavior of SRM slopes under surface loading conditions was investigated through a series of centrifuge model tests considering various volumetric gravel contents. The displacement field of the slope was determined with image-based displacement system to observe the deformation of the soil and the movement of the block during loading in the tests. The test results showed that the ultimate bearing capacity and the stiffness of SRM slopes increased evidently when the volumetric block content exceeded a threshold value. Moreover, there were more evident slips around the blocks in the SRM slope. The microscopic analysis of the block motion showed that the rotation of the blocks could aggravate the deformation localization to facilitate the development of the slip surface. The high correlation between the rotation of the key blocks and the slope failure indicated that the blocks became the dominant load-bearing medium that influenced the slope failure. The blocks in the sliding body formed a chain to bear the load and change the displacement distribution of the adjacent matrix sand through the block rotation.

New methods of safety evaluation for rock/soil mass surrounding tunnel under earthquake

The objective of this work is to obtain the seismic safety coefficient and fracture surface and proceed with the seismic safety evaluation for the rock mass or soil mass surrounding a tunnel,and the limitation of evaluating seismic stability is considered using the pseudo-static strength reduction.By using the finite element software ANSYS and the strength reduction method,new methods of seismic safety evaluation for the rock mass or soil mass surrounding a tunnel are put forward,such as the dynamic finite element static shear strength reduction method and dynamic finite element shear strength reduction method.In order to prove the feasibility of the proposed methods,the results of numerical examples are compared with that of the pseudo-static strength reduction method.The results show that 1) the two methods are both feasible,and the plastic zone first appears near the bottom corners; 2) the safety factor of new method Ⅱ is smaller than that of new method I but generally,and the difference is very small.Therefore,in order to ensure the safety of the structure,two new methods are proposed to evaluate the seismic stability of the rock mass or soil mass surrounding a tunnel.A theoretical basis is provided for the seismic stability of the rock mass or soil mass and the lining surrounding a tunnel and also provided for the engineering application.

Research on influence factors of rock-soil thermal properties by laboratory test

In order to discover the relation between rock-soil thermal properties and strata during the process of engineering investigation,the authors studied the measuring principle of Thermal Conductivity Scanner( TCS)and measured the thermal properties of 45 drilling samples from Qinghai with TCS in the laboratory. The results show that the specific heat capacity( SHC) decreases while the thermal conductivity( TC) increases with the increase of the depth. With the lithological change,the specific heat capacity and thermal conductivity have the opposite trend. The depth and lithology have a greater influence on the thermal conductivity than the specific heat capacity.

Numerical Analysis on Soil and Rock Formation of Ancient Gravel Strata Around Nanjing

Research samples were taken from an ancient gravel stratum which is not only a representative soil layer along the middle-lower reaches of the Yangtze River in East China, but also one of the primary Neozoic strata in Naming district. Located mostly on the second and third terraces, the ancient gravel strata formed the geomorphic landscapes of terrace and step. They were complex in constitution, varied widely in stability, of multiple sources, locally derived, and associated with braided streams in the deposition environment. A CIPW (Cross, Iddings, Pirsson and Washington) method modified by the author was used to analyze the soil-rock-forming materials of finer grains (less than 2 mm in size) of the ancient gravel stratum. Results of the analysis showed that the sandy grains were composed of apatite, ilmenite, potassium feldspar, plagioclase, enstatite and free quartz, the clay mainly of kaolinite, and the cement of a combination of silicon, aluminum and iron at a ratio of 46:44:10. In the soil-rock-forming processes, including compactional solidification, water-stable illuviation-cementation t homogeneous overgrowth and so on, the loose soil-rock-forming components gradually changed into consolidated soil and further to the early stage of lithification. Meanwhile, from the analysis, we found that the ancient gravel stratum had been protected by the overlying Xiashu loess or basalt and the overloading resulted in overconsolidated strata. The modified CIPW method was applicable and effective for semi-quantitative analysis.

Some Rock and Soil Mechanical Issues inTGP Construction

The Yangtze Three Gorges Project (TGP) is the key backbone project to develop and harness the Yangtze river in China. As the largest water conservancy project in the world with the earth and rock excavation amounting up to 102.83×10 6 m 3, it is, therefore, the largest project on a scale of geomechanical engineering. The involvement of numerous domestic and foreign research institutes in the scientific research has promoted the development of geomechanics. Some rock and soil mechanical issues arising during construction of the Three Gorges Project are discussed in this article.

Application of Ground Phosphate Rock to Dimmish the Effects of Simulated Acid Rain on Soil Properties

The effects of simulated acid rain retained in soil on the properties of acid soil and its diminishing by application of ground phosphate rock were investigated by using the sorption method.Results show as follows:(1)For yellow brown soil,the effect of simulated acid rain on the properties of soil with a pH value of 5.9 was relatively small,except a great quantity of acid rain deposited on it.(2) for red soil,the effect of simulated acid rain on the properties of soil was significant.With the increase of the amount of acid deposition,the pH value of soil was declined,but the contents of exchangeable H^+,Al^3+ and Mn^2+ and the amount of SO4^1- retention were increased.(3) Many properties of acid soils could be improved by applying ground phosphate rock.For example,pH value of soils and the amounts of available P and exchangeable Ca^2+ and Mg^2+ were increased,and the amounts of exchangeable H^+ and Al^3+ and SO4^2- retained was reduced.The application of ground posphate rock could effctively diminish the pollution of acid rain to soil.

Characteristics of rock fragments in different forest stony soil and its relationship with macropore characteristics in mountain area, northern China

Rock fragments have major effect on soil macropores and water movement. However, the characteristics of rock fragments and their relationship with macropore characteristics remain elusive in forest stony soils in northern mountainous area of China. The objectives of this study are to(1) use Industrial Computed Tomography(CT) scanning to quantitatively analyze rock fragment characteristics in intact soil columns in different forest lands and(2) identify the relationship between characteristics of rock fragments and that of the macropores. Intact soil columns that were 100 mm in diameter and 300 mm long were randomly taken from six local forest stony soils in Wuzuolou Forest Station in Miyun, Beijing. Industrial CT was used to scan all soil column samples, and then the scanned images were utilized to obtain the three-dimensional(3 D) images of rock fragments and macropore structures. Next, theparameters of the rock fragments and macropore structure were measured, including the volume, diameter, surface area, and number of rock fragments, as well as the volume, diameter, surface area, length, angle, tortuosity and number of macropores. The results showed that no significant difference was found in soil rock fragments content in the 10-30 cm layer between mixed forest and pure forest, but in the 0-10 cm soil layer, the rock fragments in mixed forest were significantly less than in pure forest. The number density of macropores has significant negative correlation with the number of rock fragments in the 0-10 cm soil layer, whereas this correlation is not significant in 10-20 cm and 20-30 cm soil layers. The volume density of macropore was not correlated with the volume density of rock fragments, and there is no correlation between the density of macropore surface area and the density of rock fragment surface area. Industrial CT scanning combined with image processing technology canprovide a better way to explore 3 D distribution of rock fragments in soil. The content of rock fragments in soil is mainly determined by parent rocks. The surface soil(0-10 cm) of forest contains fewer rock fragments and more macropores, which may be caused by bioturbation, root systems, gravitational settling and faunal undermining.

Generation of 3D random meso-structure of soil-rock mixture and its meso-structural mechanics based on numerical tests

The mesoscopic failure mechanism and the macro-mechanical characteristics of soil-rock mixture(S-RM) under external load are largely controlled by S-RM's meso-structural features. The objective of this work is to improve the three-dimensional technology for the generation of the random meso-structural models of S-RM, for randomly generating irregular rock blocks in S-RM with different shapes, sizes, and distributions according to the characteristics of the rock blocks' size distribution. Based on the new improved technology, a software system named as R-SRM3 D for generation and visualization of S-RM is developed. Using R-SRM3 D, a three-dimensional meso-structural model of S-RM is generated and used to study the meso-mechanical behavior through a series of true-triaxial numerical tests. From the numerical tests, the following conclusions are obtained. The meso-stress field of S-RM is influenced by the distribution of the internal rock blocks, and the macro-mechanical characteristics of S-RM are anisotropic in 3D; the intermediate principal stress and the soil-rock interface properties have significant influence on the macro strength of S-RM.

Numerical analysis of soil-rock mixture's meso-mechanics based on biaxial test

Soil-rock mixture(S-RM)is a widely distributed geotechnical medium composed of "soil" and "rock block" different both in size and strength. Internal rock blocks form special and variable meso-structural characteristics of S-RM. The objective of this work was to study the control mechanism of meso-structural characteristics on mechanical properties of S-RM. For S-RM containing randomly generated polygonal rock blocks, a series of biaxial tests based on DEM were conducted. On the basis of research on the effects of rock blocks' breakability and sample lateral boundary type(rigid, flexible) on macroscopic mechanical behavior of S-RM, an expanded Mohr-Coulomb criterion in power function form was proposed to represent the strength envelop. At the mesoscopic level, the variations of meso-structure such as rotation of rock block, and the formation mechanism and evolution process of the shear band during tests were investigated. The results show that for S-RM with a high content of rock block, translation, rotating and breakage of rock blocks have crucial effects on mechanical behavior of S-RM. The formation and location of the shear band inside S-RM sample are also controlled by breakability and arrangement of rock blocks.

Experimental study of polyurethane foam reinforced soil used as a rock-like material

In this study, p o ly u reth an e foam ty p e th e rm o se t polym erizing, d u e to chem ical reaction b e tw e e n itsliquid ingredients, w as teste d as b in d e r afte r solidifying and th e n a rock-like m aterial m ixing w ith asandy silt ty p e soil w as prep ared . The uniaxial com pressive stren g th s （UCSs） o f p o ly u reth an e foamreinforced soil specim ens w ere d e term in ed for different p o ly u reth an e ratios in th e m ixture. A dditionally,a series o f te sts o n slake durability, im pact value, freezing-th aw in g resistance, and ab rasio n resistance ofp o ly u reth an e reinforced soil （PRS） m ix tu re w as co n d u cted . The UCS values over 3 M Pa w ere m easuredfrom th e PRS specim ens. The testin g results show ed th a t tre a te d soil can econom ically b ecom e adesirable rock-like m aterial in term s o f slake d u ra b ility a n d resistances ag ain st freezing-thaw ing, im pacteffect an d abrasion. As a n o th e r ch aracteristic o f th e rock-like m aterial m ade w ith p o ly u reth an e foam,u n it volum e w eig h t w as found to be q uite low er th a n th o se o f n atu ral rock m aterials.

Determining CO_2 consumption from elemental change in soil profiles developed on carbonate and silicate rocks

To further understand the roles of carbonate and silicate rocks in regulating the atmosphere/soil CO_2level,the flux of CO_2 consumed by the chemical weathering of silicate and carbonate rocks was determined from the elemental change in soil profiles.Results showed that the chemical weathering of carbonate rocks mainly occurred at the rock-regolith interface,and that the further weathering of the residua soil on the carbonate rocks was similar to that of the granite profile.Chemical weathering of the silicate rocks occurred through the whole profiles.Therefore,CO_2 consumed per volume by the silicate profiles[M_(sr)(CO_2)]and the residues on carbonate rocks[M_(cr)(CO2)]were calculated based on the elemental weathering gradients.CO_2 consumed by carbonate protolith[M_(cp)(CO_2)]was calculated from the elemental change at the rock-regolith interface.The M_(sr)(CO_2) were about tens to thousands orders of magnitude greater than M_(cr)(CO_2).Even so,this demonstrated that the residues on carbonate rocks could be a sink of CO2_ on long-term scales.The M_(cp)(CO_2) was about four times larger than M_(sr)(CO_2),which demonstrated that carbonate rocks played a more important role in regulating the CO_2 level than the silicate rocks did during the pedogenic process of the profiles.

Effect of soil-rock system on speleothems weathering in Bailong Cave,Yunnan Province,China

Bailong Cave with its well-developed Middle Triassic calcareous dolomite’s system was opened as a show cave for visitors in 1988. The speleothem scenery has been strongly weathered as white powder on the outer layers. Study of the cave winds, permeability of soil-rock system and the chemical compositions of the dripping water indicated: (1) The cave dimension structure distinctively affects the cave winds, which were stronger at narrow places. (2) Based on the different soil grain size distribution, clay was the highest in composition in the soil. The response sense of dripping water to the rainwater percolation was slow. The density of joints and other openings in dolomite make the dolomite as mesh seepage body forming piles of thin and high columns and stalactites. (3) Study of 9 dripping water samples by HYDROWIN computer program showed that the major mineral in the water was dolomite.