Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds wer...Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds were investigated. The results show that the hook in the joint welded in clockwise was curved upwards and that in anticlockwise was curved downwards. The hook formation was related to the plastic material flow in the joint. With increasing the rotary speed in clockwise direction, the hook moved upwards and far way from the center of the keyhole, resulting in an increase in the effective weld width and a decrease in the effective sheet thickness. Three types of fractuces were observed and they were affected by the hook geometries. The tensile shear load increased firstly and then decreased when the rotary speed increased in clockwise direction, which was related to the hook geometries.展开更多
Turn-milling which history dates from the end of the 20th century is one of the advanced metal cutting technologies. It could precisely machine hard materials as an alternative to turning for certain limitations. A se...Turn-milling which history dates from the end of the 20th century is one of the advanced metal cutting technologies. It could precisely machine hard materials as an alternative to turning for certain limitations. A series of orthogonal turn-milling surface veins experiments have been done on the turn-milling machining center by machining aluminum alloy,and then the nexus between the surface veins and the cutting regimes is studied. The mathematical model for surface vein direction angle is established,also the forming mechanics of surface vein direction is analyzed. Its variety regulation presents decreasing trend with as axial feed and cutter rotary speed increasing. For different eccentric distance of orthogonal turn-milling,the surface veins are different.展开更多
Stick-slip vibration presents one of the major causes of drilling problems,such as premature tool failures,low drilling efficiency and poor wellbore quality.The objective of this work is to investigate the influences ...Stick-slip vibration presents one of the major causes of drilling problems,such as premature tool failures,low drilling efficiency and poor wellbore quality.The objective of this work is to investigate the influences of rotary table speed(RTS)on stick-slip phenomenon of the drilling system.In this study,the drilling system is treated as a lumped torsional pendulum model of which the bit/rock interaction is regarded as Coulomb friction.By analyzing cases with different RTS,two types of vibrations on the bit are found:stick-slip vibration and uniform motion.With an increase in the RTS,the stick-slip vibration on the drill bit disappears once the RTS arrives at its critical value.For the cases that stick-slip vibrations occur,the phase trajectories converge toward a limit cycle.For the cases that stick-slip vibration does not appear,the drill bit tends to stabilize at a uniform motion and the phase trajectories correspond to contracting spirals observed in the phase plane.展开更多
基金This work was sponsored by the National Natural Science Foundation of China （51364037）, the Landed Plan of Science and Technology in Colleges and Universities of Jiangxi Province （KJLD12074）, the Aerospace Science Foundation of China （20111156004）.
文摘Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds were investigated. The results show that the hook in the joint welded in clockwise was curved upwards and that in anticlockwise was curved downwards. The hook formation was related to the plastic material flow in the joint. With increasing the rotary speed in clockwise direction, the hook moved upwards and far way from the center of the keyhole, resulting in an increase in the effective weld width and a decrease in the effective sheet thickness. Three types of fractuces were observed and they were affected by the hook geometries. The tensile shear load increased firstly and then decreased when the rotary speed increased in clockwise direction, which was related to the hook geometries.
基金Sponsored by Doctoral Science Foundation of Shenyang Ligong University (BS04007)
文摘Turn-milling which history dates from the end of the 20th century is one of the advanced metal cutting technologies. It could precisely machine hard materials as an alternative to turning for certain limitations. A series of orthogonal turn-milling surface veins experiments have been done on the turn-milling machining center by machining aluminum alloy,and then the nexus between the surface veins and the cutting regimes is studied. The mathematical model for surface vein direction angle is established,also the forming mechanics of surface vein direction is analyzed. Its variety regulation presents decreasing trend with as axial feed and cutter rotary speed increasing. For different eccentric distance of orthogonal turn-milling,the surface veins are different.
基金This research is supported by the National Natural Science Foundation of China(Grant No.51222406)New Century Excellent Talents in University of China(NCET-12-1061)+2 种基金Scientific Research Innovation Team Project of Sichuan Colleges and Universities(12TD007)Youth Scientific Research Innovation Team Project of Sichuan Province(2014TD0025)the key projects of academic and technical leaders cultivate fund in Sichuan Province,China(2011-441-zxh).
文摘Stick-slip vibration presents one of the major causes of drilling problems,such as premature tool failures,low drilling efficiency and poor wellbore quality.The objective of this work is to investigate the influences of rotary table speed(RTS)on stick-slip phenomenon of the drilling system.In this study,the drilling system is treated as a lumped torsional pendulum model of which the bit/rock interaction is regarded as Coulomb friction.By analyzing cases with different RTS,two types of vibrations on the bit are found:stick-slip vibration and uniform motion.With an increase in the RTS,the stick-slip vibration on the drill bit disappears once the RTS arrives at its critical value.For the cases that stick-slip vibrations occur,the phase trajectories converge toward a limit cycle.For the cases that stick-slip vibration does not appear,the drill bit tends to stabilize at a uniform motion and the phase trajectories correspond to contracting spirals observed in the phase plane.
