Hydromagnetic rotating flow of third grade fluid

This work investigates the flow of a third grade fluid in a rotating frame of reference. The fluid is incompressible and magnetohydrodynamic （MHD）. The flow is bounded between two porous plates, the lower of which is shrinking linearly. Mathematical modelling of the considered flow leads to a nonlinear problem. The solution of this nonlinear problem is computed by the homotopy analysis method （HAM）. Graphs are presented to demonstrate the effect of several emerging parameters, which clearly describe the flow characteristics.

Three-dimensional channel flow of second grade fluid in rotating frame

An analysis is performed for the hydromagnetic second grade fluid flow between two horizontal plates in a rotating system in the presence of a magnetic field. The lower sheet is considered to be a stretching sheet, and the upper sheet is a porous solid plate. By suitable transformations, the equations of conservation of mass and momentum are reduced to a system of coupled non-linear ordinary differential equations. A series of solutions to this coupled non-linear system are obtained by a powerful analytic technique, i.e., the homotopy analysis method （HAM）. The results are presented with graphs. The effects of non-dimensional parameters R, A, M2, a, and K2 on the velocity field are discussed in detail.

On the use of cross polarization in solid-state NMR:1 H spinlock versus adiabatic demagnetization in the rotating frame

Cross polarization(CP)is a widely used solid-state nuclear magnetic resonance(NMR)technique for enhancing the polarization of dilute S spins from much larger polarization of abundant I spins such as 1 H.To achieve such a polarization transfer,the I spin should either be spin-locked or be converted to the dipolar ordered state through adiabatic demagnetization in the rotating frame.In this work,we analyze the spin dynamics of the Hartmann-Hahn CP(HHCP)utilizing the 1 H spin-locking,and the dipolar-order CP(DOCP)having the 1 H adiabatic demagnetization.We further propose an adiabatic demagnetization CP(ADCP)where a constant radio-frequency pulse is applied on the S spin while 1 H is adiabatically demagnetized.Our analyses indicate that ADCP utilizes the adiabatic passage to effectively achieve the polarization transfer from the 1 H to S spins.In addition,the dipolar ordered state generated during the 1 H demagnetization process could also be converted into the observable S polarization through DOCP,further enhancing the polarized signals.It is shown by both static and magic-angle-spinning(MAS)NMR experiments that ADCP has dramatically broadened the CP matching condition over the other CP schemes.Various samples have been used to demonstrate the polarization transfer efficiency of this newly proposed ADCP scheme.

Comment on “Analyses of Mössbauer Experiments in a Rotating System: Proper and Improper Approaches” [Annals of Physics Volume 418, July 2020, 168191]

The notion of classical well localized trajectories of a single photon in Minkowski spacetime does not make any rigorous sense by the well-known existence of a proof that single photons cannot be well localized. This leads to principal difficultness when photodetection probability on relativistic non inertial frame of reference is considered. In order to resolve this tension, we extend canonical Minkowski geometry up to relevant point-free Minkowski geometry [Ann. Physics 423 (2020) 168329]. The photodetection probability density on uniformly rotating frame endrowed with point-free Lorentzian geometry is obtained. The result of S. A. Podosenov et al. [Ann. Physics 413 (2020) 168047] is obtained without any reference to unphysical notion of the classical trajectories of photon. The paper again shows the correctness of the remarkable result of Prof. C. Corda concerning the Mössbauer rotor experiment as new proof of general relativity, which has been awarded by the Gravity Research Foundation. In addition, the paper also shows various very elementary mistakes, misunderstandings and flaws by the self-called “YARK group”, which is a group of fringe researchers who attempts to promote wrong science, in particular, against the relativity theory.

Analysis of Transforming dq Impedances of Different Converters to A Common Reference Frame in Complex Converter Networks

DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.

Seismic safety assessment of existing masonry infill structures in Nepal

Reinforced concrete（RC） buildings in Nepal are constructed with RC frames and masonry infill panels. These structures exhibit a highly non-linear inelastic behavior resulting from the interaction between the panels and frames. This paper presents an extensive case study of existing RC buildings in Nepal. Non-linear analyses were performed on structural models of the buildings considered as a bare frame and with masonry infill, in order to evaluate the influence of infill walls on the failure mechanisms. Five three-storey buildings with different structural configurations and detailing were selected. The effect of masonry infill panels on structural response was delineated by comparing the bare-framed response with the infill response. Seismic performance is evaluated with regard to global strength, stiffness, energy dissipation, inter-storey drift, and total deflection of the structure. A parametric analysis of structures with masonry infill is also performed. For this, the influence of different material properties is studied, namely diagonal compressive stress, modulus of elasticity and tensile stress of masonry infill panels. Study results show that masonry infill increases the global strength and stiffness of the structures; it decreases the inter-storey drift and hence the total displacement of the structure. The results quantify the influence of the infill panels on structural response and, in particular, the effect of the diagonal compressive strength of the masonry wall.

Applying extended intrinsic mean spin tensor in evolution algorithm for RANS modelling of turbulent rotating channel flow

We present a machine learning based method for RANS modeling in the rotating frame of reference(RFR).The extended intrinsic mean spin tensor(EIMST)is adopted in a novel expansion of the evolution algorithm,named multi-dimensional gene expression programming(MGEP).Based on DNS data,a constrain free model for Reynolds stress is created by considering system rotating.The anisotropy behavior of Reynolds stress is considered in the model,which is then for the first time applied for modeling turbulent flow inside a rotating channel.Compared with the traditional RANS model,the new model can predict the non-symmetric profile of Reynolds stress.Meanwhile,the Taylor-Gortler vortex is captured in our simulations with the new model.It is demonstrated that the application of EIMST in MGEP can be successfully adopted for RANS modeling in the RFR.

Heat transfer analysis of MHD rotating flow of Fe_(3)O_(4)nanoparticles through a stretchable surface

The flow of a magnetite-H_(2)O nanofluid has been considered among two rotating surfaces,assuming porosity in the upper plate.Furthermore,the lower surface is considered to move with variable speed to induce the forced convection.Centripetal as well as Coriolis forces impacting on the rotating fluid are likewise taken into account.Adequate conversions are employed for the transformation of the governing partial-differential equations into a group of non-dimensional ordinary-differential formulas.Numerical solution of the converted expressions is gained by means of the shooting technique.It is theoretically found that the nanofluid has less skin friction and advanced heat transport rate when compared with the base fluid.The effect of rotation causes the drag force to elevate and reduces the heat transport rate.Streamlines are portrayed to reveal the impact of injection/suction.

Proca equation and vector field quantization in a rotating system

A strong background field drastically changes the vacuum structure and proper basis of a system in both classical and quantum mechanics,e.g.,the Landau levels in a background magnetic field.This is true even for a rotating system.In such a system,the usual set of plane-wave states would no longer be suitable as a starting point of perturbation.Alternatively and straightforwardly,in a rapidly and globally rotating system,it is better to reformulate the perturbation computation in principle.In this study,we completed the first step for the spin-1 field,which includes solving the Proca equation in the presence of a background rotation and completing its canonical quantization.We show that because of the symmetry,the eigen states are actually the same as those of Maxwell equations in cylindrical coordinates.The propagator as well as the near-central approximation were obtained by assuming that the vorticity areas are very small in the relativistic QGP.

Spin path integral and quantum mechanics in the rotating frame of reference

We have developed a path integral formalism of the quantum mechanics in the rotating frame of reference, and proposed a path integral description of spin degrees of freedom, which is connected to the Schwinger bosons realization of the angular momenta. We have also given several important examples for the applications in the rotating frames.

Effect of some parameters on the performance of anchor impellers for stirring shear-thinning fluids in a cylindrical vessel

The 3-D hydrodynamics of shear thinning fluids in a stirred tank with an anchor impeller were numerically simulated.By using a computational fluid dynamics code（CFX 13.0）,the obtained results give a good prediction of the hydrodynamics such as the velocity fields and cavern size.The multiple reference frames（MRF） technique was employed to model the rotation of the impellers.The rheology of the fluid was approximated using the Ostwald model.To validate the CFD model,some predicted results were compared with the experimental data and a satisfactory agreement was found.The effects of impeller speed,fluid rheology,and some design parameters on the flow pattern,cavern size and power consumption were explored.

Arc Behavior and Droplet Transfer of CWW CO_2 Welding

Cable-type welding wire（CWW）CO2 welding is an innovative process arc welding with high quality,high efficiency and energy saving,in which CWW is used as consumable electrode.The CWW is composed of seven wires with a diameter of 1.2mm.One is in the center,while others uniformly distribute around it.The diameter of twisted wire is up to 3.6mm,which can increase the deposition rate significantly.With continual wire-feeding and melting of CWW,the formed rotating arc improved welding quality obviously.The arc behavior and droplet transfer were observed by the electrical signal waveforms and corresponding synchronous images,based on the high speed digital camera and electrical signal system.The results showed that the shape of welding arc changed from bell arc to beam arc with the increase of welding parameter.The droplet transfer mode changed from repelled transfer,globular transfer to projected transfer in turn.Droplet transfer frequency increased from 18.17 Hz to 119.05 Hz,while the droplet diameter decreased from 1.5times to 0.3times of the CWW diameter.

Solid-state transformer-based new traction drive system and control

A new type of traction drive system consisting of solid-state traction transformer （SSTT）, inverter unit, auxiliary inverter, traction motor and other key components is built in order to suit the demand of developing the next-generation electric traction system which will be efficient and lightweight, with high power density. For the purpose of reducing system volume and weight and improving efficiency and grid-side power quality, an efficient SSTT optimized topology combining highvoltage cascaded rectifiers with high-power high-frequency LLC resonant converter is proposed. On this basis, an integrated control strategy built upon synchronous rotating reference frame is presented to achieve unified control over fundamental active, reactive and harmonic components. The cartier-interleaving phase shift modulation strategy is proposed to improve the harmonic performance of cascaded rectifiers. In view of the secondary pulsating existing in a single-phase system, the mathematical model of secondary power transfer is built, and the mechanism of pulsating voltage resulting in beat frequency of LLC resonant converter is revealed, so as to design optimum matching of system parameters. Simulation and experimental results have verified that the traction system and control scheme mentioned in this paper are reasonable and superior and that they meet the future application requirements for rail transit.

Deep-sky image live stacking via star descriptor

Image registration is an old topic but has a new application in deep-sky imaging fields named live stacking. In this Letter, we propose a live stacking algorithm based on star detection, description, and matching. A thresholding method based on Otsu and centralization is proposed to implement star detection. Then, a translation and rotation invariant descriptor is proposed to provide accurate feature matching. Extensive experiments illustrate that our proposed method is feasible in deep-sky image live stacking.