Strategies for Ramp Route Design of Highway Interchange

The rapid advancement of urban transportation in modern China has driven urban economic developments.However,the progressively congested traffic conditions have affected the productivity and daily life of the people.To mitigate the congestion problem,necessary road designs should be implemented along the highways,for example highway interchanges.The application of highway interchanges in past cases have proven to effectively avoid traffic flow conflicts,reduce highway traffic congestion,and reduce traffic accidents,this is conducive to ensuring the safety and efficiency of the highway.In order to improve the safety and convenience of urban road traffic,this paper analyzes the strategy of using interchange ramp route designs for highway traffic.

Energy-constrained ferry route design for sparse wireless sensor networks

In recent years,using message ferries as mechanical carriers of data has been shown to be an effective way to collect information in sparse wireless sensor networks.As the sensors are far away from each other in such highly partitioned scenario,a message ferry needs to travel a long route to access all the sensors and carry the data collected from the sensors to the sink.Typically,practical constraints(e.g.,the energy)preclude a ferry from visiting all sensors in a single tour.In such case,the ferry can only access part of the sensors in each tour and move back to the sink to get the energy refilled.So,the energy-constrained ferry route design(ECFRD)problem is discussed,which leads to the optimization problem of minimizing the total route length of the ferry,while keeping the route length of each tour below a given constraint.The ECFRD problem is proved to be NP-hard problem,and the integer linear programming(ILP)formulation is given.After that,efficient heuristic algorithms are proposed to solve this problem.The experimental results show that the performances of the proposed algorithms are effective in practice compared to the optimal solution.

Route design and automatic check in electronic chart display and information system

For an electronic chart display and information system (ECDIS), the most important function is the route design. In this paper, a novel approach to developing ECDIS was given and then an effective method was proposed for route design and automatic check. The mathematical model and logical relationship for coordinate transformation were also provided. They were adopted in ECDIS developing, which was based on the researeh of the Vxworks real-time operating system. The actual system application implies that the method is practical and can help navigation very well.

Expressway Route and Interchange Design

With the rapid development of the socio-economy and the growing demand for transportation,highways have become an indispensable and important part of the modern transportation network.The design of highway routes and interchanges is a key link in highway construction,which directly affects the efficiency,safety,and traffic smoothness of highways.Based on this,this article analyzes in detail the highway route design and the design of two common interchanges,in order to improve the highway route design and the quality and efficiency of highway construction.

Analysis of Roadbed Pavement Designs for Highway Reconstruction and Upgrading

This paper focuses on the route and roadbed pavement design in highway reconstruction and upgrading projects.It discusses the importance of project design for highway reconstruction and upgrading,highlighting key aspects of route design and roadbed pavement design.The analysis reveals that the main design considerations in these projects include controlling factors of route reconstruction,expansion,and upgrading,as well as route plan design and longitudinal section design combined with roadbed pavement.In roadbed pavement design,it is crucial for designers to thoroughly collect existing data and make reasonable use of the current roadbed and pavement to develop a comprehensive design scheme.This analysis aims to provide a reference for the reasonable design of such projects.

Space Modeling Method for Ship Pipe Route Design

Ship pipe route design(SPRD)is one of the most complex and timeconsuming processes in ship detail design.Currently,there are many researches on the optimization of ship pipe routes,but there is still a lack of effective and convenient methods to build the pipe routing space.In order to solve this problem,a piping space modeling method for SPRD is proposed.This method is based on stereo lithographic(STL)file which is commonly used in data exchange,and it can convert the initial space model built in 3D-CAD software into the data model required by the pipe routing algorithms.For the application purpose,a piping space modeling utility(PSMU)is developed with Python and OpenGL,promoting the development of practical pipe routing system.Finally,the feasibility and practicability of the proposed method are verified by the experiment on the piping space of an actual ship fuel system.

Application of Campbell Model in the Design of Tourist Routes： A Case Study of Rizhao City

Tourist route design is essential to the scenic spot planning and tour route design. In this paper, four elements of tourist route design were identified to form the list of tourist route design principle. Based on the analysis of Campbell model, four-point inspiration for tourist route design was summarized, a Campbell model-based schematic of the tourist route design of Rizhao was formed grounded on the analysis of tourism resources and service facilities in Rizhao, so as to explore the optimal way of the tourist route design.

An Ant Colony Algorithm Based on Cross-Layer Design for Routing and Wavelength Assignment in Optical Satellite Networks

This paper introduces an ant colony routing and wavelength assignment algorithm based on cross-layer design(CL-ACRWA),which can overcome the adverse effects of Doppler wavelength shift on data transmission in optical satellite networks. Firstly, a cross-layer optimization model is built, which considers the Doppler wavelength shift, the transmission delay as well as wavelength-continuity constraint. Then an ant colony algorithm is utilized to solve the cross-layer optimization model, resulting in finding an optimal light path satisfying the above constraints for every connection request. The performance of CL-ACRWA is measured by the communication success probability, the convergence property and the transmission delay. Simulation results show that CL-ACRWA performs well in communication success probability and has good global search ability as well as fast convergence speed. Meanwhile, the transmission delay can meet the basic requirement of real-time transmission of business.

Designing Fano-Like Quantum Routing via Atomic Dipole-Dipole Interactions

Fano-like quantum routing of single photons in a system with two waveguides coupled to two collocated atoms is investigated theoretically. Using a full quantum theory in real space, photonic scattering amplitudes along four ports of the waveguide network are analytically obtained. It is shown that, by adjusting the atomic dipole-dipole interaction, an evident Fano-line shape emerges in the scattering spectra of the single-dot configuration system. Moreover, Fano resonance can also be achieved by varying the atom-waveguide coupling strength and atomic detuning, in the presence of the atomic dipole-dipole interaction. Therefore, the atomic dipole-dipole interaction may be utilized as a possible way to control spectral Fano-like resonance. The feasibility with the experimental waveguide channels is also discussed.

Dynamic routing and wavelength assignment algorithm of optical satellite networks based on cross-layer design

In order to overcome the adverse effects of Doppler wavelength shift on data transmission in the optical satellite networks,a dynamic routing and wavelength assignment algorithm based on crosslayer design( CL-DRWA) is introduced which can improve robustness of the network. Above all,a cross-layer optimization model is designed,which considers transmission delay and wavelength-continuity constraint,as well as Doppler wavelength shift. Then CL-DRWA is applied to solve this model,resulting in finding an optimal light path satisfying the above constraints for every connection request. In CL-DRWA,Bellman-Ford method is used to find an optimal route and a distributed relative capacity loss method is implemented to get an optimal wavelength assignment result on the optimal route. Moreover,compared with the dynamic routing and wavelength assignment algorithm based on minimum delay strategy( MD-DRWA),CL-DRWA can make an improvement of 5. 3% on the communication success probability. Meanwhile,CL-DRWA can meet the requirement of transmission delay for real-time services.

Simultaneous optimization of transit network and public bicycle station network

The traditional manner to design public transportation system is to sequentially design the transit network and public bicycle network. A new public transportation system design problem that simultaneously considers both bus network design and public bicycle network design is proposed. The chemical reaction optimization(CRO) is designed to solve the problem. A shortcoming of CRO is that, when the two-molecule collisions take place, the molecules are randomly picked from the container.Hence, we improve CRO by employing different mating strategies. The computational results confirm the benefits of the mating strategies. Numerical experiments are conducted on the Sioux-Falls network. A comparison with the traditional sequential modeling framework indicates that the proposed approach has a better performance and is more robust. The practical applicability of the approach is proved by employing a real size network.

Analysis on the Development of Lushan （Xingzi） Hot Spring Health Tourism Products from the Perspective of Product Integrated Marketing

Through the development of more than 60 years, the hot spring tourism industry in China will confront with a situation of ＂innovative competition, standard development, and secondary upgrade＂. In this paper, from the perspective of product integrated marketing theory, by taking Lushan （Xingzi） hot spring as an example, the authors carry out an analysis on some problems in the development of Xingzi hot spring tourism products, propose the framework and model of the integrated development of hot spring health tourism products, and also provide some suggestions for the design of Xingzi hot spring health tourism routes.

A routing algorithm for FPGAs with time-multiplexed interconnects

Previous studies show that interconnects occupy a large portion of the timing budget and area in FPGAs.In this work,we propose a time-multiplexing technique on FPGA interconnects.In order to fully exploit this interconnect architecture,we propose a time-multiplexed routing algorithm that can actively identify qualified nets and schedule them to multiplexable wires.We validate the algorithm by using the router to implement 20 benchmark circuits to time-multiplexed FPGAs.We achieve a 38%smaller minimum channel width and 3.8%smaller circuit critical path delay compared with the state-of-the-art architecture router when a wire can be time-multiplexed six times in a cycle.

Experimental Study and Numerical Simulation of Evacuation in an Offshore Platform

With the rapid development of marine oil and gas exploitation,the evacuation of offshore platforms has received more attention.First,an experimental investigation of the evacuation process of 120 participants in a real offshore platform is performed,and then simulation results provided by Pathfinder are validated against the measurement results.Second,four typical evacuation scenarios on the platform referring to IMO guidelines are investigated by Pathfinder with the speed values achieved in experiments.The simulation results show that both the utilization of exits and evacuation efficiency of people on the offshore platform need to be further improved.Last,the evacuation routes of people under the four scenarios are optimized,and the improvement of the evacuation performance after the optimization is evaluated by several mathematical indicators.Final results show that the evacuation with the optimized route design prompts the use efficiency of exits and further reduces the evacuation time.The present study provides a useful advice for potentially revising the IMO guidelines in future and provides efficient evacuation strategies for planning the emergency evacuation on offshore platforms.

Compound graph based hybrid data center topologies

In large-scale data centers, many servers are in- terconnected via a dedicated networking structure, so as to satisfy specific design goals, such as the low equipment cost, the high network capacity, and the incremental expansion. The topological properties of a networking structure are criti- cal factors that dominate the performance of the entire data center. The existing networking structures are either fully random or completely structured. Although such networking structures exhibit advantages on given aspects, they suffer ob- vious shortcomings in other essential fields. In this paper, we aim to design a hybrid topology, called R3, which is the com- pound graph of structured and random topology. It employs random regular graph as a unit duster and connects many such clusters by means of a structured topology, i.e., the gen- eralized hypercube. Consequently, the hybrid topology com- bines the advantages of structured as well as random topolo- gies seamlessly. Meanwhile, a coloring-based algorithm is proposed for R3 to enable fast and accurate routing. R3 pos- sesses many attractive characteristics, such as the modularity and expansibility at the cost of only increasing the degree of any node by one. Comprehensive evaluation results show that our hybrid topology possesses excellent topology properties and network performance.

Interference aware routing for mobile ad hoc networks based on node's sending and receiving capabilities

How to efficiently build routes among nodes is increasing important for mobile ad hoc networks （MANETs）. This paper puts forward an interference aware routing protocol called Interference aware cross layer routing protocol （IA-CLR） for MANETs based on the IEEE 802.11 medium access layer （MAC）. By defining the node＇s sending and receiving capabilities, IA-CLR can indicate the interference strength of the link in a real and comprehensive way. Further more, in order to choose the route with minimum bottleneck link interference, a new routing metric is proposed by combining the MAC layer and the network layer for cross layer design. Simulation results show that IA-CLR can significantly improve the performances of network such as the average end-to-end delay, the packets loss ratio and the throughput.