A molecular dynamics simulation study was performed to investigate the formation and evolution mechanisms of nano-clusters during the rapid solidification of liquid CaToMg30 alloy. The cluster-type index method （CTIM...A molecular dynamics simulation study was performed to investigate the formation and evolution mechanisms of nano-clusters during the rapid solidification of liquid CaToMg30 alloy. The cluster-type index method （CTIM） was adopted to describe microstructure evolutions of nano-clusters during solidification. Results indicate that amorphous structure is mainly formed with three bond-types of 1551, 1541 and 1431 at the cooling rate of 5~1011 K/S, and glass transition temperature Tg is about 530 K; the icosahedron cluster of （12 0 12 0） plays a key role in formation of amorphous structure, and smaller Mg atoms are much more probable to be central atoms of icosahedron clusters; and nano-clusters are mainly formed by combining medium-size clusters. Interestingly, it was also found that formation and evolution processes of the nano-cluster display a three-stage feature which is analogous to crystallization process of amorphous alloy.展开更多
Ni/Co bimetallic nano-cluters have been prepared from the aqueous solution byreducing their corresponding metal salts under suitable conditions. The experimental conditionsincluding the type and concentration of prote...Ni/Co bimetallic nano-cluters have been prepared from the aqueous solution byreducing their corresponding metal salts under suitable conditions. The experimental conditionsincluding the type and concentration of protective agent, feeding order and the pH of the solutionthat influence the average particle size have been studied in detail. Transmission electronmicroscopy (TEM) indicates that the shape of those bimetallic nano-cluster particles is spheroid.The alloy structure has been shown by X-ray powder diffraction (XRD). The X-ray photoelectronspectroscopic (XPS) data have confirmed that the nickel and cobalt in the bimetallic nano-clustersare in the zero-valence state.展开更多
氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过...氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。展开更多
Metastable nanostructured electrocatalyst with a completely different surface environment compared to conventional phase-based electrocatalyst often shows distinctive catalytic property.Although Ru-based electrocataly...Metastable nanostructured electrocatalyst with a completely different surface environment compared to conventional phase-based electrocatalyst often shows distinctive catalytic property.Although Ru-based electrocatalysts have been widely investigated toward hydrogen oxidation reaction(HOR)under alkaline electrolytes,these studies are mostly limited to conventional hexagonal-close-packed(hcp)phase,mainly arising from the lack of sufficient synthesis strategies.In this study,we report the precise synthesis of metastable binary RuW alloy with face-centered-cubic(fcc)phase.We find that the introduction of W can serve as fcc phase seeds and reduce the formation energy of metastable fcc-RuW alloy.Impressively,fcc-RuW exhibits remarkable alkaline HOR performance and stability with the activity of 0.67 mA cm_(Ru)^(-2)which is almost five and three times higher than that of hcp-Ru and commercial Pt/C,respectively,which is attributed to the optimized binding strength of adsorbed hydroxide intermediate derived from tailored electronic structure through W doping and phase engineering.Moreover,this strategy can also be applied to synthesize other metastable fcc-RuCr and fcc-RuMo alloys with enhanced HOR performances.展开更多
基金Project(50831003) supported by the National Natural Science Foundation of ChinaProject(20114BAB215026) supported by Jiangxi Provincial Natural Science Foundation,ChinaProject(ZD201002) supported by Fund for Basic Scientific Research of Gannan Medical University,China
文摘A molecular dynamics simulation study was performed to investigate the formation and evolution mechanisms of nano-clusters during the rapid solidification of liquid CaToMg30 alloy. The cluster-type index method （CTIM） was adopted to describe microstructure evolutions of nano-clusters during solidification. Results indicate that amorphous structure is mainly formed with three bond-types of 1551, 1541 and 1431 at the cooling rate of 5~1011 K/S, and glass transition temperature Tg is about 530 K; the icosahedron cluster of （12 0 12 0） plays a key role in formation of amorphous structure, and smaller Mg atoms are much more probable to be central atoms of icosahedron clusters; and nano-clusters are mainly formed by combining medium-size clusters. Interestingly, it was also found that formation and evolution processes of the nano-cluster display a three-stage feature which is analogous to crystallization process of amorphous alloy.
基金This work was supported in part by the project of KJCXGC-01 of Northwest Normal University the Joint Program between the Educational Committee and the Economic Trade Committee of Gansu Province, China (CX-04).]
文摘Ni/Co bimetallic nano-cluters have been prepared from the aqueous solution byreducing their corresponding metal salts under suitable conditions. The experimental conditionsincluding the type and concentration of protective agent, feeding order and the pH of the solutionthat influence the average particle size have been studied in detail. Transmission electronmicroscopy (TEM) indicates that the shape of those bimetallic nano-cluster particles is spheroid.The alloy structure has been shown by X-ray powder diffraction (XRD). The X-ray photoelectronspectroscopic (XPS) data have confirmed that the nickel and cobalt in the bimetallic nano-clustersare in the zero-valence state.
文摘氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。
基金the support from the National Natural Science Foundation of China(22272121,21972107)the National Key Research and Development program of China(2021YFB4001200)。
文摘Metastable nanostructured electrocatalyst with a completely different surface environment compared to conventional phase-based electrocatalyst often shows distinctive catalytic property.Although Ru-based electrocatalysts have been widely investigated toward hydrogen oxidation reaction(HOR)under alkaline electrolytes,these studies are mostly limited to conventional hexagonal-close-packed(hcp)phase,mainly arising from the lack of sufficient synthesis strategies.In this study,we report the precise synthesis of metastable binary RuW alloy with face-centered-cubic(fcc)phase.We find that the introduction of W can serve as fcc phase seeds and reduce the formation energy of metastable fcc-RuW alloy.Impressively,fcc-RuW exhibits remarkable alkaline HOR performance and stability with the activity of 0.67 mA cm_(Ru)^(-2)which is almost five and three times higher than that of hcp-Ru and commercial Pt/C,respectively,which is attributed to the optimized binding strength of adsorbed hydroxide intermediate derived from tailored electronic structure through W doping and phase engineering.Moreover,this strategy can also be applied to synthesize other metastable fcc-RuCr and fcc-RuMo alloys with enhanced HOR performances.
