We report on the formation of a graphene monolayer on a Ru（0001） surface by annealing the Ru（0001） crystal. The samples are characterized by scanning tunnelling microscopy （STM） and Auger electron spectroscopy ...We report on the formation of a graphene monolayer on a Ru（0001） surface by annealing the Ru（0001） crystal. The samples are characterized by scanning tunnelling microscopy （STM） and Auger electron spectroscopy （AES）. STM images show that the Moire pattern is caused by the graphene layer mismatched with the underlying Ru（0001） surface and has an N × N superlattice. It is further found that the graphene monolayer on a Ru（0001） surface is very stable at high temperatures. Our results provide a simple and convenient method to produce a graphene monolayer on the Ru（0001） surface, which is used as a template for fabricating functional nanostructures needed in future nano devices and catalysis.展开更多
The adsorption and reaction of acetaldehyde on the clean and CO pre-covered Ru（0001） surfaces have been investigated using temperature programmed desorption method. On the clean Ru（0001） surface, the decomposition...The adsorption and reaction of acetaldehyde on the clean and CO pre-covered Ru（0001） surfaces have been investigated using temperature programmed desorption method. On the clean Ru（0001） surface, the decomposition of acetaldehyde is the main reaction channel, with little polymerization occurring. However, on the CO pre-covered Ru（0001） surface, the de- composition of acetaldehyde is inhibited considerably with increasing CO coverage. Whereas, the polymerization occurs efficiently, especially at high CO coverage （θco〉0.5 ML）, which is strongly CO coverage dependent. Combined with previous studies, the well-ordered hexagohal structure of CO layer formed on the Ru（0001） surface at high CO coverage that matches the configuration of paraldehyde is likely to be the origin of this remarkable phenomenon.展开更多
Periodic density functional theory（DFT） calculations are presented to describe the adsorption and decomposition of CH3OH on Ru（0001） surfaces with different coverages, including p（3 ×2）, p（2×2）, and ...Periodic density functional theory（DFT） calculations are presented to describe the adsorption and decomposition of CH3OH on Ru（0001） surfaces with different coverages, including p（3 ×2）, p（2×2）, and p（2× 1） unit cells, corresponding to monolayer（ML） coverages of 1/6, 1/4, and 1/2, respectively. The geometries and energies of all species involved in methanol dissociation were analyzed, and the initial decomposition reactions of methanol and the subsequent dehydrogenations reactions of CH3O and CH2OH were all computed at 1/2, 1/4, and 1/6 ML coverage on the Ru（0001） surface. The results show that coverage exerts some effects on the stable adsorption of CH30, CH2OH, and CH3, that is, the lower the coverage, the stronger the adsorption. Coverage also exerts effects on the initial decomposition of methanol. C-H bond breakage is favored at 1/2 ML, whereas C-H and O--H bond cleavages are preferred at 1/4 and 1/6 ML on the Ru（0001） surface, respectively. At 1/4 ML coverage on the Ru（0001） surface, the overall reaction mechanism can be written as 9CH3OH ,3CH30＋6CH2OH＋9H ,6CH20＋3CHOH＋18H , 7CHO＋COH＋CH＋OH＋26H → 8CO＋C＋O＋36H.展开更多
The electrooxidation of CO on Ru (0001) and RuO2 (100) electrode surfaces were characterized by cyclic voltammetry, AES and RHEED. The CO adlayer was first partially oxidized at 0.8 V, which is controlled by the atta...The electrooxidation of CO on Ru (0001) and RuO2 (100) electrode surfaces were characterized by cyclic voltammetry, AES and RHEED. The CO adlayer was first partially oxidized at 0.8 V, which is controlled by the attack of oxygen species toward the Ru(0001) surface. The remaining CO adlayer oxidation at 0.55 V is related to the combination of CO molecules with oxygen species already located on the surface. In contrast, successive peaks on RuO2(100) at 0.4 V and 0.72 V are observed, which shows that CO molecules can directly react with two different lattice-oxygen on the surface to carbon dioxide.展开更多
Based on a first-principles density functional plane-wave ultrasoft pseudopotential method,the surface properties of two different types of terminated CrB2(0001)are calculated and compared,such as surface relaxation,s...Based on a first-principles density functional plane-wave ultrasoft pseudopotential method,the surface properties of two different types of terminated CrB2(0001)are calculated and compared,such as surface relaxation,surface energy and electricity structure.The results of surface relaxation show surface interlayer distance converges rapidly for both terminated CrB2(0001)when the number of the atoms layers reaches 9.Through analysis of charge density difference and partial density of states(PDOS),it can be concluded that CrB2(0001)models with B termination have smaller interface energy,stronger electronic interaction than another models and the form of termination is more stable.展开更多
The adsorptions of nitrogen atoms on Ru（0001）, （1010） low index surfaces and （1120）, （1121） stepped surfaces were investigated by the five-parameter Morse potential（5-MP） method in details, Calculated result...The adsorptions of nitrogen atoms on Ru（0001）, （1010） low index surfaces and （1120）, （1121） stepped surfaces were investigated by the five-parameter Morse potential（5-MP） method in details, Calculated results demonstrate that N atoms show a tendency to be adsorbed at threefold sites. No subsurface state was found for N atoms on Ru（1010） surface. There exist 6 stable adsorption sites for N atoms on Ru（1121） stepped surface which can be classified into 3 types： the on-surface adsorption state, the facet adsorption state and the subsurface state. Moreover, two new perpendicular vibrations at 97 and 98 meV are predicted. All calculated results are in good accord with HR-EELS experiments.展开更多
The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structur...The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structures formed by halogen atoms adsorbed at different sites was determined.The difference between the adsorption of F and Cl on Mg（0001） surface was also discussed.The calculation results show that hollow sites are the energetically most favorable at the low-coverage.It can be concluded from the Mulliken charges and density of states that electrons transfer from the substrate Mg atoms to the adatoms,which leads to the formation of adsorbate bond and further causes the stronger interaction between Mg atom and adatom.The interaction between Cl and Mg atoms is weaker than the interaction between F and Mg.展开更多
The adsorption and the growth of ZnO on α-Al2O3（0001） surface at various temperatures were theoretically calculated by using a plane wave pseudopotentials （USP） method based on density functional theory.The avera...The adsorption and the growth of ZnO on α-Al2O3（0001） surface at various temperatures were theoretically calculated by using a plane wave pseudopotentials （USP） method based on density functional theory.The average adsorption energy of ZnO at 400, 600 and 800 ℃ is 4.16±0.08, 4.25±0.11 and 4.05±0.23 eV respectively. Temperature has a remarkable effect on the structure of the surface and the interface of ZnO/α-Al2O3（0001）. It is found that the Zn-hexagonal symmetry deflexion does not appear during the adsorption growth of ZnO at 400 ℃, and that the ZnO[10^-10] is parallel with the [10^-10] of the α-Al2O3（0001）, which is favorable for forming ZnO film with the Zn-terminated surface. It is observed from simulation that there are two kinds of surface structures in the adsorption of ZnO at 600 ℃： one is the ZnO surface that has the Zn-terminated structure, and whose [10^-10] parallels the [10^-10] of the substrate surface, and the other is the ZnO[10^-10] //sapphire [11-20] with the O-terminated surface. The energy barrier of the phase transition between these two different surface structures is about 1.6 eV, and the latter is more stable. Therefore,the suitable temperature for the thin film growth of ZnO on sapphire is about 600 ℃, and it facilitates the formation of wurtzite structure containing Zn-O-Zn-O-Zn-O double-layers as a growth unit-cell. At 600 ℃, the average bond length of Zn-O is 0.190±0.01 nm, and the ELF value indicates that the bond of （substrate）-O-Zn-O has a distinct covalent character, whereas the （Zn）O-Al （substrate） shows a clear character of ionic bond. However, at a temperature of 800 ℃, the dissociation of Al and O atoms on the surface of the α-Al2O3（0001） leads to a disordered surface and interface structure. Thus, the Zn-hexagonal symmetry structure of the ZnO film is not observed under this condition.展开更多
The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorpti...The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorption and H-OH dissociative adsorption are revealed by our calculations. The activities of the surface reactions of H2O on GaN（0001） surface are investigated. For the stepwise processes of H2O decomposition into H2 in gas phase and adsorbed O atom （H2O（g）→H2O（chem）→OH（chem） ＋ H（chem）→2H（chem） ＋ O（chem）→H2（g） ＋ O（chem））, the first and second steps are facile and can even occur at room temperature; while the last two have high barriers and thus are difficult to proceed, especially the fourth step is endothermic. In short, H2O adsorption and decomposition into H2 in gas phase and adsorbed O atom on GaN（0001） surface are exothermic by -43.98 kcal/mol.展开更多
In this paper, the density functional theory has been used to perform a comparative theoretical study of water monomer, dimer, trimer, and bilayer adsorptions on the Be（0001） surface. In our calculations, the adsorb...In this paper, the density functional theory has been used to perform a comparative theoretical study of water monomer, dimer, trimer, and bilayer adsorptions on the Be（0001） surface. In our calculations, the adsorbed water molecules are energetically favoured adsorbed on the atop sites, and the dimer adsorption is found to be the most stable with a peak adsorption energy of - 437 meV. Further analyses have revealed that the essential bonding interaction between the water monomer and the metal substrate is the hybridization of the water 3al-like molecular orbital with the （s, P2） orbitals of the surface beryllium atoms. While in the case of the water dimer adsorption, the lbz-like orbital of the H2O molecule plays a dominant role.展开更多
The adsorption and decomposition of H2S on the ZnO（0001） surface have been investigated with first-principles calculations.The results reveal that H2S is dissociatively adsorbed on the clean ZnO（0001） surface to g...The adsorption and decomposition of H2S on the ZnO（0001） surface have been investigated with first-principles calculations.The results reveal that H2S is dissociatively adsorbed on the clean ZnO（0001） surface to generate HS-and hydrogen species.To our interest,as indicated by Mulliken charge and density of states of the configuration calculation,the bonding mechanism of H2S on the ZnO（0001） surface can involve the donation of charge from the ＂s lone pairs＂ into the surface and the back donation of surface electrons to H2S.Therefore,the electrons should play an important role in decomposition.Furthermore,the reactivity of H2S adsorption and further thermal decomposition reactions on the ZnO（0001） surface have also been discussed by calculating the possible reaction pathways.As expected,H2 will be easily generated during the decomposition process.展开更多
6H-SiC is an important semiconductor material. The 6H-SiC wafer is always exposed to a high-humidity environment and the effect from the absorbed water molecule and some relative adsorbates is not negligible. Here, th...6H-SiC is an important semiconductor material. The 6H-SiC wafer is always exposed to a high-humidity environment and the effect from the absorbed water molecule and some relative adsorbates is not negligible. Here, the oxygen and water molecules absorbed on the 6H-SiC(0001) surface and the dissociation process were studied with density functional theory. On the 6H-SiC(0001) surface, absorbed O2 is spontaneously dissociated into O*, which is absorbed on a hollow site, and further transforms the 6H-SiC(0001) surface into SiO2. The absorbed H2O is spontaneously broken into OH*and H*, which are both absorbed on the top of the Si atom, and OH* is further reversibly transformed into O* and H*. The H* could saturate the dangling Si bond and change the absorption type of O*, which could stabilize the 6H-SiC(0001) surface and prevent it from transforming into SiO2.展开更多
Evaluating the effect of metal surface density on catalytic performance is critical for designing high-activity metal-based catalysts.In this study,a series of ceria(CeCO_(2))-supported Ru catalysts(Ru/CeCO_(2))were p...Evaluating the effect of metal surface density on catalytic performance is critical for designing high-activity metal-based catalysts.In this study,a series of ceria(CeCO_(2))-supported Ru catalysts(Ru/CeCO_(2))were prepared to analyze the effect of Ru surface density on the catalytic performance of Ru/CeCO_(2) for ammonia synthesis.For the Ru/CeCO_(2) catalysts with Ru surface densities lower than 0.68 Ru nm^(-2),the Ru layers were in close contact with CeCO_(2),and electrons were transferred directly from the CeCO_(2) defect sites to the Ru species.In such cases,the adsorption of hydrogen species on the Ru sites in the vicinity of 0 atoms was high,leading to a high ammonia synthesis activity and strong hydrogen poisoning.In contrast,the preferential aggregation of Ru species into large particles on top of the Ru overlayer resulted in the coexistence of Ru clusters and particles,for catalysts with a Ru surface density higher than 1.4 Ru nm^(-2),for which Ru particles were isolated from the direct electronic influence of CeCO_(2).Consequently,the Ru-Ceth interactions were weak,and hydrogen poisoning can be significantly alleviated.Overall,electron transfer and hydrogen adsorption synergistically affected the synthesis of ammonia over Ru/CeCO_(2) catalysts,and catalyst samples with a Ru surface density lower than 0.31 Ru nm^(-2) or exactly 2.1 Ru nm^(-2) exhibited high catalytic activity for ammonia synthesis.展开更多
Photocatalysis of CH3OH on the ZnO(0001) surface has been investigated by using temperature-programmed desorption (TPD) method with a 266 nm laser light. TPD results show that part of the CH3OH adsorbed on ZnO(0001) s...Photocatalysis of CH3OH on the ZnO(0001) surface has been investigated by using temperature-programmed desorption (TPD) method with a 266 nm laser light. TPD results show that part of the CH3OH adsorbed on ZnO(0001) surface are in molecular form, while others are dissociated. The thermal reaction products of H2, CH3·, H2O, CO, CH2O, CO2 and CH3OH have been detected. Experiments with the UV laser light indicate that the irradiation can promote the dissociation of CH3OH/CH3O· to form CH2O, which can be fu- ture converted to HCOO- during heating or illumination. The reaction between CH3OHZn and OHad can form the H2O molecule at the Zn site. Both temperature and illumination promote the desorption of CH3· from CH3O·. The research provides a new insight into the photocatalytic reaction mechanism of CH3OH on ZnO(0001).展开更多
The addition reactions of alkenes and alkynes to the H-terminated GaN （0001） surface with a Ga dangling-bond have been studied employing periodic density functional theory （PDFT） calculations. Detailed information...The addition reactions of alkenes and alkynes to the H-terminated GaN （0001） surface with a Ga dangling-bond have been studied employing periodic density functional theory （PDFT） calculations. Detailed information on the reaction pathways of these alkenes and alkynes with H-GaN （0001） surface is provided, which indicates that the reactions contain two steps separated by the metastable intermediates： elementary addition reaction and H-abstraction process. From the energy curves, the reactions are clearly viable in the cases of ethene, styrene and phenylacetylene; while for ethyne, the H-abstraction barrier is higher than the desorption barrier of the intermediate, so the adsorbed C2H2 in intermediate is more likely to be desorbed back into the gas phase than to form a stable adsorbed species. Furthermore, it is obvious that for either alkenes or alkynes, the systems substituted by phenyl have more stable intermediates because π conjugation could improve their stabilities.展开更多
基金Project supported by the National Natural Science Foundation of China （Grant Nos 90406022 and 10674159）.
文摘We report on the formation of a graphene monolayer on a Ru（0001） surface by annealing the Ru（0001） crystal. The samples are characterized by scanning tunnelling microscopy （STM） and Auger electron spectroscopy （AES）. STM images show that the Moire pattern is caused by the graphene layer mismatched with the underlying Ru（0001） surface and has an N × N superlattice. It is further found that the graphene monolayer on a Ru（0001） surface is very stable at high temperatures. Our results provide a simple and convenient method to produce a graphene monolayer on the Ru（0001） surface, which is used as a template for fabricating functional nanostructures needed in future nano devices and catalysis.
文摘The adsorption and reaction of acetaldehyde on the clean and CO pre-covered Ru（0001） surfaces have been investigated using temperature programmed desorption method. On the clean Ru（0001） surface, the decomposition of acetaldehyde is the main reaction channel, with little polymerization occurring. However, on the CO pre-covered Ru（0001） surface, the de- composition of acetaldehyde is inhibited considerably with increasing CO coverage. Whereas, the polymerization occurs efficiently, especially at high CO coverage （θco〉0.5 ML）, which is strongly CO coverage dependent. Combined with previous studies, the well-ordered hexagohal structure of CO layer formed on the Ru（0001） surface at high CO coverage that matches the configuration of paraldehyde is likely to be the origin of this remarkable phenomenon.
基金Supported by the Key Program of Natural Science of Tianjin, China（No. 13JCZDJC26800）, the National Natural Science Foundation of China（Nos.21503122, 21346002）, the Shanxi Province Science Foundation for Youths, China（No.2014021016-2）, the Scientific and Technological Programs in Shanxi Province, China（No.2015031017） and the Foundation of Key Laboratory of Advanced Energy Materials Chemistry of Ministry of Education of China.
文摘Periodic density functional theory（DFT） calculations are presented to describe the adsorption and decomposition of CH3OH on Ru（0001） surfaces with different coverages, including p（3 ×2）, p（2×2）, and p（2× 1） unit cells, corresponding to monolayer（ML） coverages of 1/6, 1/4, and 1/2, respectively. The geometries and energies of all species involved in methanol dissociation were analyzed, and the initial decomposition reactions of methanol and the subsequent dehydrogenations reactions of CH3O and CH2OH were all computed at 1/2, 1/4, and 1/6 ML coverage on the Ru（0001） surface. The results show that coverage exerts some effects on the stable adsorption of CH30, CH2OH, and CH3, that is, the lower the coverage, the stronger the adsorption. Coverage also exerts effects on the initial decomposition of methanol. C-H bond breakage is favored at 1/2 ML, whereas C-H and O--H bond cleavages are preferred at 1/4 and 1/6 ML on the Ru（0001） surface, respectively. At 1/4 ML coverage on the Ru（0001） surface, the overall reaction mechanism can be written as 9CH3OH ,3CH30＋6CH2OH＋9H ,6CH20＋3CHOH＋18H , 7CHO＋COH＋CH＋OH＋26H → 8CO＋C＋O＋36H.
文摘The electrooxidation of CO on Ru (0001) and RuO2 (100) electrode surfaces were characterized by cyclic voltammetry, AES and RHEED. The CO adlayer was first partially oxidized at 0.8 V, which is controlled by the attack of oxygen species toward the Ru(0001) surface. The remaining CO adlayer oxidation at 0.55 V is related to the combination of CO molecules with oxygen species already located on the surface. In contrast, successive peaks on RuO2(100) at 0.4 V and 0.72 V are observed, which shows that CO molecules can directly react with two different lattice-oxygen on the surface to carbon dioxide.
文摘Based on a first-principles density functional plane-wave ultrasoft pseudopotential method,the surface properties of two different types of terminated CrB2(0001)are calculated and compared,such as surface relaxation,surface energy and electricity structure.The results of surface relaxation show surface interlayer distance converges rapidly for both terminated CrB2(0001)when the number of the atoms layers reaches 9.Through analysis of charge density difference and partial density of states(PDOS),it can be concluded that CrB2(0001)models with B termination have smaller interface energy,stronger electronic interaction than another models and the form of termination is more stable.
基金Supported by the Natural Science Foundation of Shandong Province,China(No.Y2006B29)
文摘The adsorptions of nitrogen atoms on Ru（0001）, （1010） low index surfaces and （1120）, （1121） stepped surfaces were investigated by the five-parameter Morse potential（5-MP） method in details, Calculated results demonstrate that N atoms show a tendency to be adsorbed at threefold sites. No subsurface state was found for N atoms on Ru（1010） surface. There exist 6 stable adsorption sites for N atoms on Ru（1121） stepped surface which can be classified into 3 types： the on-surface adsorption state, the facet adsorption state and the subsurface state. Moreover, two new perpendicular vibrations at 97 and 98 meV are predicted. All calculated results are in good accord with HR-EELS experiments.
基金Project (51201079) supported by the National Natural Science Foundation of ChinaProject (2012Z099) supported by the Scientific Research Fund of Department of Education of Yunnan Province,ChinaProject (KKSY201251033) supported by the Scientific Research Foundation for Introduced Talents of KMUST,China
文摘The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structures formed by halogen atoms adsorbed at different sites was determined.The difference between the adsorption of F and Cl on Mg（0001） surface was also discussed.The calculation results show that hollow sites are the energetically most favorable at the low-coverage.It can be concluded from the Mulliken charges and density of states that electrons transfer from the substrate Mg atoms to the adatoms,which leads to the formation of adsorbate bond and further causes the stronger interaction between Mg atom and adatom.The interaction between Cl and Mg atoms is weaker than the interaction between F and Mg.
文摘The adsorption and the growth of ZnO on α-Al2O3（0001） surface at various temperatures were theoretically calculated by using a plane wave pseudopotentials （USP） method based on density functional theory.The average adsorption energy of ZnO at 400, 600 and 800 ℃ is 4.16±0.08, 4.25±0.11 and 4.05±0.23 eV respectively. Temperature has a remarkable effect on the structure of the surface and the interface of ZnO/α-Al2O3（0001）. It is found that the Zn-hexagonal symmetry deflexion does not appear during the adsorption growth of ZnO at 400 ℃, and that the ZnO[10^-10] is parallel with the [10^-10] of the α-Al2O3（0001）, which is favorable for forming ZnO film with the Zn-terminated surface. It is observed from simulation that there are two kinds of surface structures in the adsorption of ZnO at 600 ℃： one is the ZnO surface that has the Zn-terminated structure, and whose [10^-10] parallels the [10^-10] of the substrate surface, and the other is the ZnO[10^-10] //sapphire [11-20] with the O-terminated surface. The energy barrier of the phase transition between these two different surface structures is about 1.6 eV, and the latter is more stable. Therefore,the suitable temperature for the thin film growth of ZnO on sapphire is about 600 ℃, and it facilitates the formation of wurtzite structure containing Zn-O-Zn-O-Zn-O double-layers as a growth unit-cell. At 600 ℃, the average bond length of Zn-O is 0.190±0.01 nm, and the ELF value indicates that the bond of （substrate）-O-Zn-O has a distinct covalent character, whereas the （Zn）O-Al （substrate） shows a clear character of ionic bond. However, at a temperature of 800 ℃, the dissociation of Al and O atoms on the surface of the α-Al2O3（0001） leads to a disordered surface and interface structure. Thus, the Zn-hexagonal symmetry structure of the ZnO film is not observed under this condition.
基金Supported by the National Natural Science Foundation of China (No. 20673019)
文摘The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorption and H-OH dissociative adsorption are revealed by our calculations. The activities of the surface reactions of H2O on GaN（0001） surface are investigated. For the stepwise processes of H2O decomposition into H2 in gas phase and adsorbed O atom （H2O（g）→H2O（chem）→OH（chem） ＋ H（chem）→2H（chem） ＋ O（chem）→H2（g） ＋ O（chem））, the first and second steps are facile and can even occur at room temperature; while the last two have high barriers and thus are difficult to proceed, especially the fourth step is endothermic. In short, H2O adsorption and decomposition into H2 in gas phase and adsorbed O atom on GaN（0001） surface are exothermic by -43.98 kcal/mol.
基金Project supported by the National Natural Science Foundation of China(Grant No.11074217)
文摘In this paper, the density functional theory has been used to perform a comparative theoretical study of water monomer, dimer, trimer, and bilayer adsorptions on the Be（0001） surface. In our calculations, the adsorbed water molecules are energetically favoured adsorbed on the atop sites, and the dimer adsorption is found to be the most stable with a peak adsorption energy of - 437 meV. Further analyses have revealed that the essential bonding interaction between the water monomer and the metal substrate is the hybridization of the water 3al-like molecular orbital with the （s, P2） orbitals of the surface beryllium atoms. While in the case of the water dimer adsorption, the lbz-like orbital of the H2O molecule plays a dominant role.
基金supported by the Natural Science Foundation of Fujian Province (No. E0510004)
文摘The adsorption and decomposition of H2S on the ZnO（0001） surface have been investigated with first-principles calculations.The results reveal that H2S is dissociatively adsorbed on the clean ZnO（0001） surface to generate HS-and hydrogen species.To our interest,as indicated by Mulliken charge and density of states of the configuration calculation,the bonding mechanism of H2S on the ZnO（0001） surface can involve the donation of charge from the ＂s lone pairs＂ into the surface and the back donation of surface electrons to H2S.Therefore,the electrons should play an important role in decomposition.Furthermore,the reactivity of H2S adsorption and further thermal decomposition reactions on the ZnO（0001） surface have also been discussed by calculating the possible reaction pathways.As expected,H2 will be easily generated during the decomposition process.
基金supported by the Fundamental Research Project of Qinghai Province (2017-ZJ-795)
文摘6H-SiC is an important semiconductor material. The 6H-SiC wafer is always exposed to a high-humidity environment and the effect from the absorbed water molecule and some relative adsorbates is not negligible. Here, the oxygen and water molecules absorbed on the 6H-SiC(0001) surface and the dissociation process were studied with density functional theory. On the 6H-SiC(0001) surface, absorbed O2 is spontaneously dissociated into O*, which is absorbed on a hollow site, and further transforms the 6H-SiC(0001) surface into SiO2. The absorbed H2O is spontaneously broken into OH*and H*, which are both absorbed on the top of the Si atom, and OH* is further reversibly transformed into O* and H*. The H* could saturate the dangling Si bond and change the absorption type of O*, which could stabilize the 6H-SiC(0001) surface and prevent it from transforming into SiO2.
文摘Evaluating the effect of metal surface density on catalytic performance is critical for designing high-activity metal-based catalysts.In this study,a series of ceria(CeCO_(2))-supported Ru catalysts(Ru/CeCO_(2))were prepared to analyze the effect of Ru surface density on the catalytic performance of Ru/CeCO_(2) for ammonia synthesis.For the Ru/CeCO_(2) catalysts with Ru surface densities lower than 0.68 Ru nm^(-2),the Ru layers were in close contact with CeCO_(2),and electrons were transferred directly from the CeCO_(2) defect sites to the Ru species.In such cases,the adsorption of hydrogen species on the Ru sites in the vicinity of 0 atoms was high,leading to a high ammonia synthesis activity and strong hydrogen poisoning.In contrast,the preferential aggregation of Ru species into large particles on top of the Ru overlayer resulted in the coexistence of Ru clusters and particles,for catalysts with a Ru surface density higher than 1.4 Ru nm^(-2),for which Ru particles were isolated from the direct electronic influence of CeCO_(2).Consequently,the Ru-Ceth interactions were weak,and hydrogen poisoning can be significantly alleviated.Overall,electron transfer and hydrogen adsorption synergistically affected the synthesis of ammonia over Ru/CeCO_(2) catalysts,and catalyst samples with a Ru surface density lower than 0.31 Ru nm^(-2) or exactly 2.1 Ru nm^(-2) exhibited high catalytic activity for ammonia synthesis.
基金National Key R&D Program of China (No.2016YFF0200500), the National Natural Science Foundation of China (No.21473173, No.21590802, and No.21403207), the Strategic Prior- ity Research Program of Chinese Academy of Sciences (No.XDB17000000), and the Fundamental Research Funds for the Central Universities. We thank Chen-biao Xu at Dalian Institute of Chemical Physics, Chinese Academy of Sciences and Wen-shao Yang at Hangzhou Institute of Advanced Studies, Zhejiang Normal Uni- versity for their help during experiments.
文摘Photocatalysis of CH3OH on the ZnO(0001) surface has been investigated by using temperature-programmed desorption (TPD) method with a 266 nm laser light. TPD results show that part of the CH3OH adsorbed on ZnO(0001) surface are in molecular form, while others are dissociated. The thermal reaction products of H2, CH3·, H2O, CO, CH2O, CO2 and CH3OH have been detected. Experiments with the UV laser light indicate that the irradiation can promote the dissociation of CH3OH/CH3O· to form CH2O, which can be fu- ture converted to HCOO- during heating or illumination. The reaction between CH3OHZn and OHad can form the H2O molecule at the Zn site. Both temperature and illumination promote the desorption of CH3· from CH3O·. The research provides a new insight into the photocatalytic reaction mechanism of CH3OH on ZnO(0001).
基金Supported by the National Natural Science Foundation of China (No 20673019)
文摘The addition reactions of alkenes and alkynes to the H-terminated GaN （0001） surface with a Ga dangling-bond have been studied employing periodic density functional theory （PDFT） calculations. Detailed information on the reaction pathways of these alkenes and alkynes with H-GaN （0001） surface is provided, which indicates that the reactions contain two steps separated by the metastable intermediates： elementary addition reaction and H-abstraction process. From the energy curves, the reactions are clearly viable in the cases of ethene, styrene and phenylacetylene; while for ethyne, the H-abstraction barrier is higher than the desorption barrier of the intermediate, so the adsorbed C2H2 in intermediate is more likely to be desorbed back into the gas phase than to form a stable adsorbed species. Furthermore, it is obvious that for either alkenes or alkynes, the systems substituted by phenyl have more stable intermediates because π conjugation could improve their stabilities.
