通过水热改性氢氧化锆制备了SO42-/ZrO2固体酸催化剂。以冰乙酸和正丁醇的酯化反应为探针反应,确定了固体超强酸的最佳制备条件。分别考察了浸渍硫酸浓度、硫酸浸渍时间和焙烧温度等对催化活性的影响。并以水热改性和未经水热改性氢氧...通过水热改性氢氧化锆制备了SO42-/ZrO2固体酸催化剂。以冰乙酸和正丁醇的酯化反应为探针反应,确定了固体超强酸的最佳制备条件。分别考察了浸渍硫酸浓度、硫酸浸渍时间和焙烧温度等对催化活性的影响。并以水热改性和未经水热改性氢氧化锆制备SO42-/ZrO2固体超强酸做了对比实验,采用XRD、BET对催化剂进行了表征。实验结果表明:水热改性氢氧化锆制备SO42-/ZrO2固体酸催化剂的最佳条件是:浸渍硫酸浓度为0.5mol/L,浸渍时间是120 m in,焙烧温度500℃。乙酸正丁酯较佳的合成工艺条件是:反应温度105~110℃,反应时间2 h,n(正丁醇)∶n(冰乙酸)=2∶1,催化剂用量占反应投料总质量的0.27%,冰乙酸的酯化率达99.1%。催化剂重复使用4次后催化活性降低5%。展开更多
A S 2O 2- 8/ZrO 2 Al 2O 3 type solid superacid catalyst was prepared from ZrOCl 2·8H 2O, AlCl 3· 6H 2O and (NH 4) 2S 2O 8 by coprecipitation, maceration and calcination processes. Their crystal structures an...A S 2O 2- 8/ZrO 2 Al 2O 3 type solid superacid catalyst was prepared from ZrOCl 2·8H 2O, AlCl 3· 6H 2O and (NH 4) 2S 2O 8 by coprecipitation, maceration and calcination processes. Their crystal structures and acidities were determined by XRD and Hammett method, respectively. The activity of the catalyst was studied as function of Al 2O 3 content, calcination temperature and time in the esterification of acetic acid with butanol, and a conversion of 96 5% was obtained. The catalyst gave also higher yields in syntheses of ketals and acetals: cyclohexanone ethylene ketal(86 2%), acetophenone ethylene ketal(78 5%), acetylacetic ester ketal(88 5%), benzaldehyde glycol acetal(76 3%). The chemical structures of the products were confirmed by IR spectra.展开更多
文摘通过水热改性氢氧化锆制备了SO42-/ZrO2固体酸催化剂。以冰乙酸和正丁醇的酯化反应为探针反应,确定了固体超强酸的最佳制备条件。分别考察了浸渍硫酸浓度、硫酸浸渍时间和焙烧温度等对催化活性的影响。并以水热改性和未经水热改性氢氧化锆制备SO42-/ZrO2固体超强酸做了对比实验,采用XRD、BET对催化剂进行了表征。实验结果表明:水热改性氢氧化锆制备SO42-/ZrO2固体酸催化剂的最佳条件是:浸渍硫酸浓度为0.5mol/L,浸渍时间是120 m in,焙烧温度500℃。乙酸正丁酯较佳的合成工艺条件是:反应温度105~110℃,反应时间2 h,n(正丁醇)∶n(冰乙酸)=2∶1,催化剂用量占反应投料总质量的0.27%,冰乙酸的酯化率达99.1%。催化剂重复使用4次后催化活性降低5%。
文摘A S 2O 2- 8/ZrO 2 Al 2O 3 type solid superacid catalyst was prepared from ZrOCl 2·8H 2O, AlCl 3· 6H 2O and (NH 4) 2S 2O 8 by coprecipitation, maceration and calcination processes. Their crystal structures and acidities were determined by XRD and Hammett method, respectively. The activity of the catalyst was studied as function of Al 2O 3 content, calcination temperature and time in the esterification of acetic acid with butanol, and a conversion of 96 5% was obtained. The catalyst gave also higher yields in syntheses of ketals and acetals: cyclohexanone ethylene ketal(86 2%), acetophenone ethylene ketal(78 5%), acetylacetic ester ketal(88 5%), benzaldehyde glycol acetal(76 3%). The chemical structures of the products were confirmed by IR spectra.
