In this paper the pumping unit of type QLCJ14-6 is studied.Through the belt driving unit,the mo-tor drives the driving sprocket in which the rotation rate has been reduced by the reduction ge arbox.The locus chain mov...In this paper the pumping unit of type QLCJ14-6 is studied.Through the belt driving unit,the mo-tor drives the driving sprocket in which the rotation rate has been reduced by the reduction ge arbox.The locus chain moves between the driving sprocket and upper sprocket which are vertically set.There's a special chain element in the locus chain,which drives the reciprocating holster with the main shaft linchpin and slide block.The r reciprocating g holster could only move up and down when the locus chain moves in a circle.In this way the up and down stroke of the sucker rod and the mac hine is realized.The lower end of the reciprocating holster is con-nected with the equilibrium system to make the structure balance.The balancing cylinder is re-placed by the balancing block to make the structure simplified.展开更多
The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells...The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells (MMSC) and fibroblast colony forming units (CFU-F). The aim of this study was to compare the main characteristics of MMSC and CFU-F derived from the bone marrow of 24 healthy donors. Growth and differentiation parameters, as well as relative expression levels of different genes were analyzed in MMSC and CFU-F. MMSC were cultivated for 5 passages. CFU-F concentration was determined for each bone marrow sample. The data obtained demonstrated the heterogeneity and hierarchical organization of both studied populations of stromal precursor cells-MMSC and CFU-F. These two types of stromal precursor cells turned to be different in most parameters studied. Altogether MMSC seemed to be more immature cells than CFU-F and took up the higher position in hierarchical tree of mesenchymal stem cells. The rate of differentiation and proliferative potential decreased with the donor’s age in both populations MMSC and CFU-F.展开更多
Objective:To classify 21 new isolates of Trypanosoma cruai(T.cruzi) according to the Discrete Typing Unit(DTU) which they belong to,as well as tune up a new pair of primers designed to detect the parasite in biologica...Objective:To classify 21 new isolates of Trypanosoma cruai(T.cruzi) according to the Discrete Typing Unit(DTU) which they belong to,as well as tune up a new pair of primers designed to detect the parasite in biological samples.Methods:Strains were isolated,DNA extracted,and classified by using three Polymerase Chain Reactions(PCR).Subsequently this DNA was used along with other isolates of various biological samples,for a new PCR using primers designed.Finally,the amplified fragments were sequenced.Results:It was observed the predominance of DTU i in Colombia,as well as the specificity of our primers for detection of T.cruzi,while no band was obtained when other species were used.Conclusions:This work reveals the genetic variability of 21 new isolates of T.cruzi in Colombia.Our primers confirmed their specificity for detecting the presence of T.cruzi.展开更多
In this paper the influence of a knot on the structure of a polymethylene （PM） strand in the tensile process is investigated by using the steered molecular dynamics （SMD） method. The gradual increasing of end-to-e...In this paper the influence of a knot on the structure of a polymethylene （PM） strand in the tensile process is investigated by using the steered molecular dynamics （SMD） method. The gradual increasing of end-to-end distance, R, results in a tighter knot and a more stretched contour. That the break in a knotted rope almost invariably occurs at a point just outside the ＇entrance＇ to the knot, which has been shown in a good many experiments, is further theoretically verified in this paper through the calculation of some structural and thermodynamic parameters. Moreover, it is found that the analyses on bond length, torsion angle and strain energy can facilitate to the study of the localization and the size of a knot in the tensile process. The symmetries of torsion angles, bond lengths and bond angles in the knot result in the whole symmetry of the knot in microstructure, thereby adapting itself to the strain applied. Additionally, the statistical property of the force-dependent average knot size illuminates in detail the change in size of a knot with force f, and therefore the minimum size of the knot in the restriction of the potentials considered in this work for a PM chain is deduced. At the same time, the difference in response to uniaxial strain, between a knotted PM strand and an unknotted one is also investigated. The force-extension profile is easily obtained from the simulation. As expected, for a given f, the knotted chain has an R significantly smaller than that of an unknotted polymer. However, the scaled difference becomes less pronounced for larger values of N, and the results for longer chains approach those of the unknotted chains.展开更多
文摘In this paper the pumping unit of type QLCJ14-6 is studied.Through the belt driving unit,the mo-tor drives the driving sprocket in which the rotation rate has been reduced by the reduction ge arbox.The locus chain moves between the driving sprocket and upper sprocket which are vertically set.There's a special chain element in the locus chain,which drives the reciprocating holster with the main shaft linchpin and slide block.The r reciprocating g holster could only move up and down when the locus chain moves in a circle.In this way the up and down stroke of the sucker rod and the mac hine is realized.The lower end of the reciprocating holster is con-nected with the equilibrium system to make the structure balance.The balancing cylinder is re-placed by the balancing block to make the structure simplified.
文摘The organization of the compartment of mesenchymal stem cells is still obscure. Two types of human stromal precursor cells are known. Both of them are analyzed in in vitro system: mesenchymal multipotent stromal cells (MMSC) and fibroblast colony forming units (CFU-F). The aim of this study was to compare the main characteristics of MMSC and CFU-F derived from the bone marrow of 24 healthy donors. Growth and differentiation parameters, as well as relative expression levels of different genes were analyzed in MMSC and CFU-F. MMSC were cultivated for 5 passages. CFU-F concentration was determined for each bone marrow sample. The data obtained demonstrated the heterogeneity and hierarchical organization of both studied populations of stromal precursor cells-MMSC and CFU-F. These two types of stromal precursor cells turned to be different in most parameters studied. Altogether MMSC seemed to be more immature cells than CFU-F and took up the higher position in hierarchical tree of mesenchymal stem cells. The rate of differentiation and proliferative potential decreased with the donor’s age in both populations MMSC and CFU-F.
基金funded by a FPU a grant from the Ministry of Education of Spain
文摘Objective:To classify 21 new isolates of Trypanosoma cruai(T.cruzi) according to the Discrete Typing Unit(DTU) which they belong to,as well as tune up a new pair of primers designed to detect the parasite in biological samples.Methods:Strains were isolated,DNA extracted,and classified by using three Polymerase Chain Reactions(PCR).Subsequently this DNA was used along with other isolates of various biological samples,for a new PCR using primers designed.Finally,the amplified fragments were sequenced.Results:It was observed the predominance of DTU i in Colombia,as well as the specificity of our primers for detection of T.cruzi,while no band was obtained when other species were used.Conclusions:This work reveals the genetic variability of 21 new isolates of T.cruzi in Colombia.Our primers confirmed their specificity for detecting the presence of T.cruzi.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 20274040,20574052 and 20774066)the Program for New Century Excellent Talents in University,China (Grant No NCET-05-0538)the Natural Science Foundation of Zhejiang Province,China (Grant No R404047)
文摘In this paper the influence of a knot on the structure of a polymethylene （PM） strand in the tensile process is investigated by using the steered molecular dynamics （SMD） method. The gradual increasing of end-to-end distance, R, results in a tighter knot and a more stretched contour. That the break in a knotted rope almost invariably occurs at a point just outside the ＇entrance＇ to the knot, which has been shown in a good many experiments, is further theoretically verified in this paper through the calculation of some structural and thermodynamic parameters. Moreover, it is found that the analyses on bond length, torsion angle and strain energy can facilitate to the study of the localization and the size of a knot in the tensile process. The symmetries of torsion angles, bond lengths and bond angles in the knot result in the whole symmetry of the knot in microstructure, thereby adapting itself to the strain applied. Additionally, the statistical property of the force-dependent average knot size illuminates in detail the change in size of a knot with force f, and therefore the minimum size of the knot in the restriction of the potentials considered in this work for a PM chain is deduced. At the same time, the difference in response to uniaxial strain, between a knotted PM strand and an unknotted one is also investigated. The force-extension profile is easily obtained from the simulation. As expected, for a given f, the knotted chain has an R significantly smaller than that of an unknotted polymer. However, the scaled difference becomes less pronounced for larger values of N, and the results for longer chains approach those of the unknotted chains.
