A Ventral Diverterless High Offset S-shaped Inlet at Transonic Speeds

An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate： （1） a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; （2） the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; （3） the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; （4） the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534.

Numerical Investigation of Electrohydrodynamic (EHD) Flow Control in an S-Shaped Duct

An electrohydrodynamic （EHD） method, which is based on glow discharge plasma, is presented for flow control in an S-shaped duct. The research subject is an expanding channel with a constant width and a rectangular cross section. An equivalent divergence angle and basic function are introduced to build the three-dimensional model. Subsequently, the plasma physical models are simplified as the effects of electrical body force and work （done by the force） on the fluid near the wall. With the aid of FLUENT software, the source terms of momentum and energy are added to the Navier-Stokes equation. Finally, the original performance of three models （A, B and C） is studied, in which model A demonstrates better performance. Then EHD control based on model A is discussed. The results show that the EHD method is an effective way of reducing flow loss and improving uniformity at the duct exit. The innovation in this study is the assessment of the EHD control effect on the flow in an S-shaped duct. Both the parametric modeling of the S-shaped duct and the simplified models of plasma provide valuable information for future research on aircraft inlet ducts.

Incorporating S-shaped testing-effort functions into NHPP software reliability model with imperfect debugging

Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.

Modeling behaviors of a coal pillar rib using the progressive S-shaped yield criterion

Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines requires a complete understanding of complex pillar damage mechanisms.Continuum models represent a convenient tool for analyzing this problem,but the behavior of such models is dependent of the choice of the constitutive model.In this study,a recently proposed constitutive model was used to simulate the rib fracturing process in a longwall chain pillar at West Cliff mine.After calibration,the model was able to capture the rib displacement profiles for multiple locations of the longwall face and the stress evolution 4 m into the pillar.The rib bolts in the model were found to be yielding over 60% of their length under the headgate loading condition.The model also predicted a steady damage accumulation in the rib for certain face locations,which is consistent with the description of the rib at the site.Damage was localized along the upper part of the pillar and underscored the role that the dirt band played in controlling rib deterioration at the site.The ability of the numerical model to replicate field measurements provides confidence in the capabilities of the new constitutive model.Finally,the need of using multi-point calibration is highlighted by comparing the results of the calibrated model to an alternative model calibrated to a smaller amount of data.

Analysis and Simulation of S-shaped Waveguide in Silicon-on-insulator

The simulation and analysis of S-shaped waveguide bend are presented.Bend radius larger than 30 mm assures less than 0.5 dB radiation loss for a 4-μm-wide silicon-on-insulator waveguide bend with 2-μm etch depth.Intersection angle greater than 20° provides negligible crosstalk (<-30 dB) and very low insertion loss.Any reduction in bend radius and intersection angle is at the cost of the degradation of characteristics of bent waveguide and intersecting waveguide, respectively.

Enhancement of Characteristics of Antenna Arrays Employing S-Shaped Resonators

This paper illustrates a simple kind of tri-band printed G-shaped monopole antenna for Multiple-Input-Multiple-Output (MIMO) systems. The proposed antenna is used to achieve three operating frequencies, 2.45 GHz, 5.2 GHz and 8.2 GHz for wireless communications. To improve the isolation between the two radiating elements, we use left-handed materials composed of only S-shaped resonators to get negative refractive index at the three operating frequencies. When one layer of S-shaped resonators is employed, the antenna correlation, the diversity gain and the bandwidth are also enhanced. The simulated results are presented and evaluated with and without left-handed materials.

Shaping ability of thermomechanically treated files in simulated S-shaped root canals

Aim: the aim of this study was to investigate the shaping ability of thermomechanically treated files manufactured by twisting(Twisted files)and compare it to conventional rotary system (K3, Sybron Endo, Orange, CA) in S-shaped canals, including formation of ledges, zipping, elbow, outer widening, danger zone, perforation and file deformation. Materials & Methods: Forty S-Shaped canals in resin blocks were randomly divided into 2 groups of 20 each. Pre-instrumentation images of the canals were taken via a digital camera and superimposed on images taken after preparation with TF and K3 systems to apical size of 25/06 and 30/06. Canal aberrations were measured from the superimposed image at five levels using AutoCAD system. Fisher exact test and Mann Whitney test were used for analysis of the data. Results: the incidence of zipping, elbow and apical transportation was significantly lower in the TF group (P = 0.04). Generally the incidence of aberration increased when the apical size increased to 30/0.06 regardless of the file system. Significant file deformation was evident in the TF after single use (P ? 0.001). Conclusion: Under the conditions of this study, TF manufactured by new technique performed better than K3 systems when used up to size 25/06 in simulated S-shaped canals. Clinical significance: The flexibility of thermomechanically treated files is beneficial in canals with multiple curvatures;however, attention should be paid to the instrument taper and final apical size of the preparation.

Analysis of the generation mechanism of the S-shaped J–V curves of MoS_(2)/Si-based solar cells

Amorphous–microcrystalline MoS_(2)thin films are fabricated using the sol-gel method to produce MoS_(2)/Si-based solar cells. The generation mechanisms of the S-shaped current density–voltage(J–V) curves of the solar cells are analyzed. To improve the performance of the solar cells and address the problem of the S-shaped J–V curve, a MoS_(2)film and a p^(+) layer are introduced into the front and back interfaces of the solar cell, respectively, which leads to the formation of a p–n junction between the p-Si and the MoS_(2)film as well as ohmic contacts between the MoS_(2)film and the ITO, improving the S-shaped J–V curve. As a result of the high doping characteristics and the high work function of the p^(+) layer, a high–low junction is formed between the p;and p layers along with ohmic contacts between the p;layer and the Ag electrode. Consequently,the S-shaped J–V curve is eliminated, and a significantly higher current density is achieved at a high voltage. The device exhibits ideal p–n junction rectification characteristics and achieves a high power-conversion efficiency(CE) of 7.55%. The findings of this study may improve the application of MoS_(2)thin films in silicon-based solar cells, which are expected to be widely used in various silicon-based electronic and optical devices.

Application and Adaptability of Ornamental Grasses in Road Flower Borders in Hefei, Anhui Province

In-depth research was conducted on the types,seasonal patterns,spatial levels,overwintering,summering,drought resistance,and disease and pest resistance of ornamental grasses in the road flower borders of Hefei,Anhui Province.Through field investigations,a total of 36 ornamental grasses were identified,with Liliaceae having the most species and the Lamiaceae the least.The results show that there are more warm season ornamental grasses,of 23 species;Acorus gramineus and Melinis minutiflora have poor overwintering ability;Arrhenatherum elatius,Festuca glauca,and Stipa tenuissima have poor summer tolerance;most ornamental grasses have strong drought resistance and resistance to pests and diseases.The comprehensive investigation shows that ornamental grasses have good application prospects and adaptability in the road flower borders in Hefei city.

Variety Selection and Green Cultivation Technology of Courtyard Ornamental and Edible Peppers

In order to comply with the development trend of the multifunctional use of peppers,we conducted an investigation into the characteristics and features of varieties,potting management techniques,and the methods of extending the fruit ornamental period and other aspects of courtyard ornamental and edible peppers.A set of cultivation techniques suitable for courtyard ornamental and edible peppers has been developed,including timely sowing and seedling,nutrient soil preparation,water and fertilizer management,trimming and pruning,preservation of flowers and fruits,green prevention and control of diseases and pests,harvesting,and so on.

The Language of Ornaments:An Anthropological Insight Into the Ethnic Ornaments of the Karbis of Assam,India

North Eastern region of India enjoys a place of pride in the whole of the country for its immensely rich assembly of tribal cultures.Among the prominent tribes of the region are the Karbis who possess unique traditions and cultures distinct from the other tribes.The Karbis are fond of ornaments and since the ancient day they have been using natural objects as ornaments,silver ornaments are used extensively by them.Preparation of different kinds of ornaments occupies an important part of material culture of the Karbis.Ornaments with distinctive colour,motifs,and designs not only reflect the cultural identity of the Karbis but are also indicative of the possession of rich cultural heritage and traditional knowledge.In this present endeavour,an attempt has been made to delineate the ethnic ornaments of the Karbis of Assam,India,along with the motifs of the designs in it which stands as one of the integral aspects of their cultural heritage.

Main Resources of Ornamental Grass and Their Ornamental Value Evaluation in Kunming

Ornamental value of 45 ornamental grass resources was evaluated by grey-correlation analysis based on the full investigation and research of ornamental grass resources in Kunming and with the characters of ornamental value, height, color of leaf and inflorescence as evaluating indexes. The results showed that the correlation degree with ideal species of 34 in the 50 ornamental grasses was higher than 0.6; Saccharum fallax, Erianthus longisetosus, Erianthus rufipilus, Zizania latifolia, etc. had better ornamental effects and their correlation degree with ideal species were 0.863 6, 0.812 5, 0.900 0 and 0.815 5, they can be used for landscaping directly.

Comparative Study on the Structural and Moisture Characteristics of Leaf from the Plantlets of Three Types of Ornamental Lilium brownii

[ Objective] The study was to compare the structural and moisture characteristics of leaf from the plantlets of three types of omamental lily（ Lilium brownii）. [ Method ] The paraffin sections of leaves of tested lily varieties were prepared and then observed under microscope, and the stomatal characteristics and moisture characteristics of tested lily varieties were measured. I Resaltl All the three ornamental lily varieties show isobilateral leaf, single layer of epicuticula and lower epidermis, and no obvious differentiation of palisade tissue and spongy tissue; their stomata distribute in lower epidermis, and the guard cells are dumbbell-shaped; all of these matedais present high moisture. For the leaf sick- ness, midrib sickness and mesophyll tissue sickness, the order was determined to be oriental lily 〉 Lilium/ongiflorum 〉 Asian lily; of the three types of ornamental lily, Ulium Iongiflorum has the largest stomatai aperture and Asian lily has the smallest; focusing the water potential and moisture, the turn was Asian lily 〉 oriental lily 〉 Lilium Iong＇fflorum. [ Condusion] The study may facilitate the artificial regulation of the growth conditions of the plantlets of ornamental lily.

Resources of Wild Ornamental Ferns in Guizhou Province and Their Utilization

Through investigating the wild ornamental ferns in Guizhou Province, it is found that there are totally 312 species (including variations), 111 genera and 49 families of such resources in this region, which are classified into terrestrial fern, epiphytic fern, saxicolous fern, vine fern, tree fern and aquatic fern according to their ecological types. The application of ornamental ferns in garden landscaping and development countermeasures are analyzed in this study.

Wild Ornamental Plant Resources and Their Application to City Gardening in Hainan Province

This paper deals with the wild ornamental plant resources which are suitable for the application to gardening in Hainan Province and with the significance and the influencing factors in the application and extension of these resources to gardening. The strategies for the application of the wild ornamental plant resources have been established as the result of this research.

Comprehensive Application of Ornamental Grass in Modern Landscape

By studying the collocation of ornamental grass and other landscape elements,this paper tries to seek for an organic integration of ornamental grass and other landscape elements to create a fine effect,which is helpful to the landscape application of ornamental grass.

Functions and Application of Ornamental Aromatic Plants in Garden Landscaping

The application history of ornamental aromatic plants in garden landscaping both in China and abroad is introduced as well as their function and categories.The application form of the ornamental aromatic plants in garden landscaping is analyzed,and the application prospect is put forward.

Investigation and Analysis of Autumn and Winter Ornamental Landscape Plants in Kuitun City of Xinjiang

Through field investigation on autumn and winter ornamental landscape plants in representative main roads, residential areas and parks of Kuitun City and based on relevant materials, the disposition and landscaping of these plants were analyzed from the perspectives of plant species, ornamental characteristics and landscape creation. The result showed that autumn and winter landscape plants in Kuitun City were primarily evergreen coniferous and deciduous trees outstanding for their shapes and colors, and that landscape was created through different types of plant disposition. Especially colors of trunks, barks, leaves, winter buds and fruits' colors provided favorable conditions for appreciating plants in autumn and winter. Finally, suggestions were proposed according to the investigation and analysis of autumn and winter ornamental plants in Kuitun City, so as to provide reference for future construction and development of landscape plants.

Effect of Metal Ions on Protease Activities in the Intestines and Hepatopancreas of Red-white Ornamental Carp (Cyprinus carpio L)

[Objective] The aim of this study was to study effects of metal ions on the protease activities in digestive tissues and gland of red-white ornamental carp（Cyprinus carpio L）.[Method] Effects of four kinds of metal ions （K＋,Na＋,Mg2＋ and Ca2＋） on protease activities in hepatopancreas,foregut,midgut,hindgut of red-white ornamental carp were studied by enzyme analysis method.[Result] Effects of four kinds of metal ions on protease activities of red-white ornamental carp were different in the range of experimental concentration from 25 mmol/L to 150 mmol/L.K＋ could promote protease activities in hepatopancreas and hindgut at different levels.Especially,K＋ had the promoting effect at low-concentration level,but the inhibitory effect at high-concentration level in midgut and the inhibitory effect in foregut.Na＋ had the promoting effect on protease activities in hepatopancreas,foregut and hindgut at different levels,but the inhibitory effect in midgut.Mg2＋ and Ca2＋ had the inhibitory effect on protease activities in intestinal and hepatopancreas at different levels.[Conclusion] This study provides basic data and theoretical foundation for researches on the digestive physiology of red-white ornamental carp or the development and optimization of compound feed.

Seed Morphology and Seedling Variation of Four Ornamental Lupin Pedigrees

[Objective] This study was conducted to reveal seed characteristics, variation and their effects on seedling growth of ornamental lupins. [Method] The phenotypic characteristics and germination rate of the seeds of four excellent lupin pedigrees were measured, and then their correlations with seeding growth were analyzed. [Result] There were abundant variations among the four ornamental lupin pedigrees. Pink seeds had the largest volume and red seeds had the largest 1 000seed weight. The variation coefficients for the seed morphological traits among the four pedigrees ranged from 2.97% to 14.34%. Seed specific weight and 1 000-seed weight could be used as important indicators for selection in breeding because of their higher variability. Seed weight variation of ornamental lupin was mainly depen- dent on seed width variation. There was small variation in seed length. The seeds of the four ornamental lupin pedigrees started to germinate one day after sowing, and the germination period was 5 d. Germination rate coefficient and germination index of pink and red seeds were higher than those of blue seeds, but blue seeds had the largest germination rate. 1 000-seed weight shared significantly positive correlations with seed germination rate, germination potential and seedling retention rate. Round and large seeds had some advantages in germination. Full seeds had higher germination rate and speed, and seedling retention rate. There was a significant relationship between seed length-width ratio and the number of leaflets of seedlings. [Conclusion] The results provided references for the evaluation of seed phenotypic diversity and breeding research of ornamental lupins.