An Improved YOLOv5s-Based Smoke Detection System for Outdoor Parking Lots

In the rapidly evolving urban landscape,outdoor parking lots have become an indispensable part of the city’s transportation system.The growth of parking lots has raised the likelihood of spontaneous vehicle combus-tion,a significant safety hazard,making smoke detection an essential preventative step.However,the complex environment of outdoor parking lots presents additional challenges for smoke detection,which necessitates the development of more advanced and reliable smoke detection technologies.This paper addresses this concern and presents a novel smoke detection technique designed for the demanding environment of outdoor parking lots.First,we develop a novel dataset to fill the gap,as there is a lack of publicly available data.This dataset encompasses a wide range of smoke and fire scenarios,enhanced with data augmentation to ensure robustness against diverse outdoor conditions.Second,we utilize an optimized YOLOv5s model,integrated with the Squeeze-and-Excitation Network(SENet)attention mechanism,to significantly improve detection accuracy while maintaining real-time processing capabilities.Third,this paper implements an outdoor smoke detection system that is capable of accurately localizing and alerting in real time,enhancing the effectiveness and reliability of emergency response.Experiments show that the system has a high accuracy in terms of detecting smoke incidents in outdoor scenarios.

Network Intrusion Traffic Detection Based on Feature Extraction

With the increasing dimensionality of network traffic,extracting effective traffic features and improving the identification accuracy of different intrusion traffic have become critical in intrusion detection systems(IDS).However,both unsupervised and semisupervised anomalous traffic detection methods suffer from the drawback of ignoring potential correlations between features,resulting in an analysis that is not an optimal set.Therefore,in order to extract more representative traffic features as well as to improve the accuracy of traffic identification,this paper proposes a feature dimensionality reduction method combining principal component analysis and Hotelling’s T^(2) and a multilayer convolutional bidirectional long short-term memory(MSC_BiLSTM)classifier model for network traffic intrusion detection.This method reduces the parameters and redundancy of the model by feature extraction and extracts the dependent features between the data by a bidirectional long short-term memory(BiLSTM)network,which fully considers the influence between the before and after features.The network traffic is first characteristically downscaled by principal component analysis(PCA),and then the downscaled principal components are used as input to Hotelling’s T^(2) to compare the differences between groups.For datasets with outliers,Hotelling’s T^(2) can help identify the groups where the outliers are located and quantitatively measure the extent of the outliers.Finally,a multilayer convolutional neural network and a BiLSTM network are used to extract the spatial and temporal features of network traffic data.The empirical consequences exhibit that the suggested approach in this manuscript attains superior outcomes in precision,recall and F1-score juxtaposed with the prevailing techniques.The results show that the intrusion detection accuracy,precision,and F1-score of the proposed MSC_BiLSTM model for the CIC-IDS 2017 dataset are 98.71%,95.97%,and 90.22%.

Decoding degeneration:the implementation of machine learning for clinical detection of neurodegenerative disorders

Machine learning represents a growing subfield of artificial intelligence with much promise in the diagnosis,treatment,and tracking of complex conditions,including neurodegenerative disorders such as Alzheimer’s and Parkinson’s diseases.While no definitive methods of diagnosis or treatment exist for either disease,researchers have implemented machine learning algorithms with neuroimaging and motion-tracking technology to analyze pathologically relevant symptoms and biomarkers.Deep learning algorithms such as neural networks and complex combined architectures have proven capable of tracking disease-linked changes in brain structure and physiology as well as patient motor and cognitive symptoms and responses to treatment.However,such techniques require further development aimed at improving transparency,adaptability,and reproducibility.In this review,we provide an overview of existing neuroimaging technologies and supervised and unsupervised machine learning techniques with their current applications in the context of Alzheimer’s and Parkinson’s diseases.

Lightweight Surface Litter Detection Algorithm Based on Improved YOLOv5s

In response to the problem of the high cost and low efficiency of traditional water surface litter cleanup through manpower,a lightweight water surface litter detection algorithm based on improved YOLOv5s is proposed to provide core technical support for real-time water surface litter detection by water surface litter cleanup vessels.The method reduces network parameters by introducing the deep separable convolution GhostConv in the lightweight network GhostNet to substitute the ordinary convolution in the original YOLOv5s feature extraction and fusion network;introducing the C3Ghost module to substitute the C3 module in the original backbone and neck networks to further reduce computational effort.Using a Convolutional Block Attention Mechanism(CBAM)module in the backbone network to strengthen the network’s ability to extract significant target features from images.Finally,the loss function is optimized using the Focal-EIoU loss func-tion to improve the convergence speed and model accuracy.The experimental results illustrate that the improved algorithm outperforms the original Yolov5s in all aspects of the homemade water surface litter dataset and has certain advantages over some current mainstream algorithms in terms of model size,detection accuracy,and speed,which can deal with the problems of real-time detection of water surface litter in real life.

RT-YOLO:A Residual Feature Fusion Triple Attention Network for Aerial Image Target Detection

In recent years,target detection of aerial images of unmannedaerial vehicle(UAV)has become one of the hottest topics.However,targetdetection of UAV aerial images often presents false detection and misseddetection.We proposed a modified you only look once(YOLO)model toimprove the problems arising in object detection in UAV aerial images:(1)A new residual structure is designed to improve the ability to extract featuresby enhancing the fusion of the inner features of the single layer.At the sametime,triplet attention module is added to strengthen the connection betweenspace and channel and better retain important feature information.(2)Thefeature information is enriched by improving the multi-scale feature pyramidstructure and strengthening the feature fusion at different scales.(3)A newloss function is created and the diagonal penalty term of the anchor frame isintroduced to improve the speed of training and the accuracy of reasoning.The proposed model is called residual feature fusion triple attention YOLO(RT-YOLO).Experiments showed that the mean average precision(mAP)ofRT-YOLO is increased from 57.2%to 60.8%on the vehicle detection in aerialimage(VEDAI)dataset,and the mAP is also increased by 1.7%on the remotesensing object detection(RSOD)dataset.The results show that theRT-YOLOoutperforms other mainstream models in UAV aerial image object detection.

Design of Online Vision Detection System for Stator Winding Coil

The quality of the stator winding coil directly affects the performance of the motor.A dual-camera online machine vision detection method to detect whether the coil leads and winding regions were qualified was designed.A vision detection platform was designed to capture individual winding images,and an image processing algorithm was used for image pre-processing,template matching and positioning of the coil lead area to set up a coordinate system.After eliminating image noise by Blob analysis,the improved Canny algorithm was used to detect the location of the coil lead paint stripped region,and the time was reduced by about half compared to the Canny algorithm.The coil winding region was trained with the ShuffleNet V2-YOLOv5s model for the dataset,and the detect file was converted to the Open Neural Network Exchange(ONNX)model for the detection of winding cross features with an average accuracy of 99.0%.The software interface of the detection system was designed to perform qualified discrimination tests on the workpieces,and the detection data were recorded and statistically analyzed.The results showed that the stator winding coil qualified discrimination accuracy reached 96.2%,and the average detection time of a single workpiece was about 300 ms,while YOLOv5s took less than 30 ms.

Range anomaly suppression based on neighborhood pixels detection in ladar range images

Research on the range anomaly suppression algorithm in laser radar （ladar） range images is significant in the application and development of ladar. But most of existing algorithms cannot protect the edge and linear target well while suppressing the range anomaly. Aiming at this problem, the differences among the edge, linear target, and range anomaly are analyzed and a novel algo- rithm based on neighborhood pixels detection is proposed. Firstly, the range differences between current pixel and its neighborhood pixels are calculated. Then, the number of neighborhood pixels is detected by the range difference threshold. Finally, whether the current pixel is a range anomaly is distinguished by the neighbor- hood pixel number threshold. Experimental results show that the new algorithm not only has a better range anomaly suppression performance and higher efficiency, but also protects the edge and linear target preferably compared with other algorithms.

Small objects detection in UAV aerial images based on improved Faster R-CNN

In order to solve the problem of small objects detection in unmanned aerial vehicle(UAV)aerial images with complex background,a general detection method for multi-scale small objects based on Faster region-based convolutional neural network(Faster R-CNN)is proposed.The bird’s nest on the high-voltage tower is taken as the research object.Firstly,we use the improved convolutional neural network ResNet101 to extract object features,and then use multi-scale sliding windows to obtain the object region proposals on the convolution feature maps with different resolutions.Finally,a deconvolution operation is added to further enhance the selected feature map with higher resolution,and then it taken as a feature mapping layer of the region proposals passing to the object detection sub-network.The detection results of the bird’s nest in UAV aerial images show that the proposed method can precisely detect small objects in aerial images.

Damage detection on framed structures: modal curvature evaluation using Stockwell Transform under seismic excitation

The key parameters for damage detection and localization are eigenfrequencies, related equivalent viscous damping factors and mode shapes. The classical approach is based on the evaluation of these structural parameters before and after a seismic event, but by using a modern approach based on time-frequency transformations it is possible to quantify these parameters throughout the ground shaking phase. In particular with the use of the S-Transform, it is possible to follow the temporal evolution of the structural dynamics parameters before, during and after an earthquake. In this paper, a methodology for damage localization on framed structures subjected to strong motion earthquakes is proposed based on monitoring the modal curvature variation in the natural frequency of a structure. Two examples of application are described to illustrate the technique: Computer simulation of the nonlinear response of a model, and several laboratory(shaking table) tests performed at the University of Basilicata(Italy). Damage detected using the proposed approach and damage revealed via visual inspections in the tests are compared.

Fault detection for nonlinear networked control systems based on fuzzy observer

Security and reliability must be focused on control sys- tems firstly, and fault detection and diagnosis （FDD） is the main theory and technology. Now, there are many positive results in FDD for linear networked control systems （LNCSs）, but nonlinear networked control systems （NNCSs） are less involved. Based on the T-S fuzzy-modeling theory, NNCSs are modeled and network random time-delays are changed into the unknown bounded uncertain part without changing its structure. Then a fuzzy state observer is designed and an observer-based fault detection approach for an NNCS is presented. The main results are given and the relative theories are proved in detail. Finally, some simulation results are given and demonstrate the proposed method is effective.

Scanning electron microscopy coupled with energydispersive X-ray spectrometry for quick detection of sulfuroxidizing bacteria in environmental water samples

Detection of sulfur-oxidizing bacteria has largely been dependent on targeted gene sequencing technology or traditional cell cultivation, which usually takes from days to months to carry out. This clearly does not meet the requirements of analysis for time-sensitive samples and/or complicated environmental samples. Since energy-dispersive X-ray spectrometry(EDS) can be used to simultaneously detect multiple elements in a sample, including sulfur, with minimal sample treatment, this technology was applied to detect sulfur-oxidizing bacteria using their high sulfur content within the cell. This article describes the application of scanning electron microscopy imaging coupled with EDS mapping for quick detection of sulfur oxidizers in contaminated environmental water samples, with minimal sample handling. Scanning electron microscopy imaging revealed the existence of dense granules within the bacterial cells, while EDS identified large amounts of sulfur within them. EDS mapping localized the sulfur to these granules. Subsequent 16S rRNA gene sequencing showed that the bacteria detected in our samples belonged to the genus Chromatium, which are sulfur oxidizers. Thus, EDS mapping made it possible to identify sulfur oxidizers in environmental samples based on localized sulfur within their cells, within a short time(within 24 h of sampling). This technique has wide ranging applications for detection of sulfur bacteria in environmental water samples.

An Automated Deep Learning Based Muscular Dystrophy Detection and Classification Model

Muscular Dystrophy (MD) is a group of inherited muscular diseases that are commonly diagnosed with the help of techniques such asmuscle biopsy, clinical presentation, and Muscle Magnetic Resonance Imaging(MRI). Among these techniques, Muscle MRI recommends the diagnosis ofmuscular dystrophy through identification of the patterns that exist in musclefatty replacement. But the patterns overlap among various diseases whereasthere is a lack of knowledge prevalent with regards to disease-specific patterns.Therefore, artificial intelligence techniques can be used in the diagnosis ofmuscular dystrophies, which enables us to analyze, learn, and predict forthe future. In this scenario, the current research article presents an automated muscular dystrophy detection and classification model using SynergicDeep Learning (SDL) method with extreme Gradient Boosting (XGBoost),called SDL-XGBoost. SDL-XGBoost model has been proposed to act as anautomated deep learning (DL) model that examines the muscle MRI dataand diagnose muscular dystrophies. SDL-XGBoost model employs Kapur’sentropy based Region of Interest (RoI) for detection purposes. Besides, SDLbased feature extraction process is applied to derive a useful set of featurevectors. Finally, XGBoost model is employed as a classification approach todetermine proper class labels for muscle MRI data. The researcher conductedextensive set of simulations to showcase the superior performance of SDLXGBoost model. The obtained experimental values highlighted the supremacyof SDL-XGBoost model over other methods in terms of high accuracy being96.18% and 94.25% classification performance upon DMD and BMD respectively. Therefore, SDL-XGBoost model can help physicians in the diagnosis of muscular dystrophies by identifying the patterns of muscle fatty replacementin muscle MRI.

AR Display Method of a Person＇s Identifier near the Head on a Camera Screen Based on the GPS Information and Face Detection Using Ad hoc and P2P Networking

The spread of social media has increased contacts of members of communities on the lntemet. Members of these communities often use account names instead of real names. When they meet in the real world, they will find it useful to have a tool that enables them to associate the faces in fiont of them with the account names they know. This paper proposes a method that enables a person to identify the account name of the person （＂target＂） in front of him/her using a smartphone. The attendees to a meeting exchange their identifiers （i.e., the account name） and GPS information using smartphones. When the user points his/her smartphone towards a target, the target＇s identifier is displayed near the target＇s head on the camera screen using AR （augmented reality）. The position where the identifier is displayed is calculated from the differences in longitude and latitude between the user and the target and the azimuth direction of the target from the user. The target is identified based on this information, the face detection coordinates, and the distance between the two. The proposed method has been implemented using Android terminals, and identification accuracy has been examined through experiments.

Development and validation of a TaqMan^(TM) fluorescent quantitative real-time PCR assay for the rapid detection of Edwardsiella tarda

Edwardsiella tarda is one of the most important emerging pathogens in tile global aquaculture industries. As such, an accurate diagnosis and quantitative analytical methods are urgently needed for this bacterium. In this study, primers and a TaqMan probe specific to the conservative sequences of the 16S rRNA gene of E. tarda were designed. The concentration of primers and TaqMan probe were optimized to 200 nmol/L and 120 nmol/L, respectively. The detection sensitivity of the FQ- PCR assay was determined to be as low as five copies of the target sequence per reaction using the pGEM-16S rDNA recombinant plasmid as a template, which was 100 times more sensitive than conventional PCR. A standard curve by plotting the threshold cycle values （y） against the common logarithmic copies （logl0n~ as x; n~ is copy number） of pGEM-16S rDNA was generated. The results of intra- and inter-assay variability tests demonstrate that the established FQ-PCR method was highly reproducible. The assay was specific for E. tarda as it showed that there was no cross-reactivity to eight additional bacterial pathogen strains in aquaculture. Thus, the FQ-PCR assay has the potential for diagnostic purposes and for other applications, especially for the rapid detection and quantification of low-grade E. tarda infections.

Leak Detection in Water Distribution Systems Using Bayesian Theory and Fisher’s Law

A leak detection method based on Bayesian theory and Fisher’s law was developed for water distribution systems. A hydraulic model was associated with the parameters of leaks (location, extent). The randomness of parameter values was quantified by probability density function and updated by Bayesian theory. Values of the parameters were estimated based on Fisher’s law. The amount of leaks was estimated by back propagation neural network. Based on flow characteristics in water distribution systems, the location of leaks can be estimated. The effectiveness of the proposed method was illustrated by simulated leak data of node pressure head and flow rate of pipelines in a test pipe network, and the leaks were spotted accurately and renovated on time.

PCR Detection of the Three <i>Neofabraea</i>Pathogenic Species Responsible for Apple Bull’s Eye Rot

Apple bull’s eye rot is caused by pathogenic Neofabraea species including N. malicorticis, N. perennans and N. alba. Fruits carrying this fungal quarantine disease are prohibited from entering China. The host plants for the pathogens include several Rosaceae fruits including apple and pear. Disease symptoms and pathogen morphology are often insufficient to determine the identity of the pathogen, particularly at the species level. In the current study, we analyzed the inter-species sequence variations in the β-tublin gene, and designed specific primers to allow PCR amplification of 554 bp fragments from pathogenic Neofabraea species. The PCR products were recovered and sequenced, and Blast search was conducted using the DNA sequences in the Genbank database. The results indicated precise PCR amplification of the target sequences from the host pathogen, which allowed unambiguous identification of the species.

An AIEgen nano-assembly for simultaneous detection of ATP and H_(2)S

A new aggregation-induced emission(AIE)-based fluorescence sensor,TPEPy-SS-C14,for simultaneous recognition of adenosine triphosphate(ATP)and hydrogen sulfide(H_(2)S)has been reported via the aggregation-disaggregation mechanism.The probe self-assembles nano-structure aggregations in aqueous solution.It shows fluorescence turn-on response toward ATP for the complexation-enhanced aggregation,but leads to fluorescence quenching of H_(2)S for cleavage the aggregations.

Implications of Electrical Impedance-Based Microbiological Technology in Pork Meat Processing Industry for the Rapid Detection and Quantification of Salmonella Spp.

The absence of efficient tools for preventing bacterial contamination in the meat processing industry as well as for detecting Salmonella positive samples in real time is a matter of concern. Impedance technology has proved its effectiveness as a bacterial quantification tool for research purposes instead of laborious standard plate count, and as a detection tool to substitute tedious current horizontal method ISO 6579：2002. Calibration curves were carded out for S. enteritidis and S. typhimurium in raw pork matrix （R2 〉 0.90）. Calibrations of mixtures of both strains at different ratio were prepared, showing a high efficiency to differentiate bacterial metabolism. Impediometry was also validated against standard plate count in raw pork samples treated by UV-C illumination to inactivate Salmonella. Even, damaged but still viable bacteria were recorded. Detection of Salmonella by impediometry led to a decrease in false positives, obtaining results within 30 h compared to 72 h in case of conventional method.

Multi-Threshold Algorithm Based on Havrda and Charvat Entropy for Edge Detection in Satellite Grayscale Images

Automatic edge detection of an image is considered a type of crucial information that can be extracted by applying detectors with different techniques. It is a main tool in pattern recognition, image segmentation, and scene analysis. This paper introduces an edge-detection algorithm, which generates multi-threshold values. It is based on non-Shannon measures such as Havrda & Charvat’s entropy, which is commonly used in gray level image analysis in many types of images such as satellite grayscale images. The proposed edge detection performance is compared to the previous classic methods, such as Roberts, Prewitt, and Sobel methods. Numerical results underline the robustness of the presented approach and different applications are shown.