To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs)...To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs) formed by basalt saw mud under autoclave curing in ordinary structural concrete.In our work,two types of prewetted functional aggregates were taken as replacements for natural aggregates with different volume substitution rates(0%,5%,10%,15%,20%,25%,and 30%) in the preparation of ordinary structural concrete with water-to-binder ratios(W/B) of 0.48 and 0.33.The effects of the functional aggregate properties and content,W/B,and curing age on the fluidity,density,mechanical properties and autogenous shrinkage of ordinary concrete were analyzed.The experimental results showed that the density of concrete declined at a rate of not more than 5%,and the 28 d compressive strength could reach 31.0-68.2 MPa.Low W/B,long curing age and high-quality functional aggregates were conducive to enhancing the mechanical properties of SPFAs concrete.Through the rolling effects,SPFAs can optimize the particle gradation of aggregate systems and improve the fluidity of concrete,and the water stored inside SPFAs provides an internal curing effect,which prolongs the cement hydration process and considerably reduces the autogenous shrinkage of concrete.SPFAs exhibits high strength and high density,as well as being more cost-effective and ecological,and is expected to be widely employed in ordinary structural concrete.展开更多
Soil salinity is a major limiting factor for crop production in coastal areas of Bangladesh. Cheap and sustainable management of soil salinity is hence most sought out topics in agricultural research. Conceptualizing ...Soil salinity is a major limiting factor for crop production in coastal areas of Bangladesh. Cheap and sustainable management of soil salinity is hence most sought out topics in agricultural research. Conceptualizing that idea in mind, a pot experiment was conducted in the Department of Soil, Water & Environment, University of Dhaka in order to analyze if common organic amendments (rice straw, saw dust) coupled with reduce photoperiod can mitigate salinity effect on the growth of bean (Phaseolus vulgaris). The experiment was set up following completely randomized design (CRD) with nine treatments and three replications containing Tc (Control), T1 (Ambient photoperiod + 110 mM Salinity treatment + Rice straw), T2 (Reduced photoperiod + 110 mM Salinity treatment + Rice straw), T3 (Ambient photoperiod + 220 mM Salinity treatment + Rice straw), T4 (Reduced photoperiod + 220 mM Salinity treatment + Rice straw), T5 (Ambient photoperiod + 110 mM Salinity treatment + Saw dust), T6 (Reduced photoperiod + 110 mM Salinity treatment + Saw dust), T7 (Ambient photoperiod + 220 mM Salinity treatment + Saw dust) and T8 (Reduced photoperiod + 220 mM Salinity treatment + Saw dust). Organic amendments were used separately at the rate of 12 ton/ha. The highest plant height (98.67 cm), root length (12.5 cm), pod number (10.33), leaf area (13.99 cm2), fresh weight (680 kg/ha), dry weight (316.67 kg/ha) were recorded with the treatment T1 while the second-best treatment was treatment T2 (with highest harvest index 0.040) and these results were statistically significant (p < 0.001). In post-harvest soil, pH, EC, OC, OM;available N, P, K, S;total Ca, Mg, Zn, Mn were increased significantly in treatment T1. The overall results illustrated that the best growth and yield performances were achieved in the treatment T1 and T2.展开更多
Surface acoustic wave (SAW) technology has been extensively explored for wireless communication, sensors, microfluidics, photonics, and quantum information processing. However, due to fabrication issues, the frequenci...Surface acoustic wave (SAW) technology has been extensively explored for wireless communication, sensors, microfluidics, photonics, and quantum information processing. However, due to fabrication issues, the frequencies of SAW devices are typically limited to within a few gigahertz, which severely restricts their applications in 5G communication, precision sensing, photonics, and quantum control. To solve this critical problem, we propose a hybrid strategy that integrates a nanomanufacturing process (i.e., nanolithography) with a LiNbO_(3)/SiO_(2)/SiC heterostructure and successfully achieve a record-breaking frequency of about 44 GHz for SAW devices, in addition to large electromechanical coupling coefficients of up to 15.7%. We perform a theoretical analysis and identify the guided higher order wave modes generated on these slow-on-fast SAW platforms. To demonstrate the superior sensing performance of the proposed ultra-high-frequency SAW platforms, we perform micro-mass sensing and obtain an extremely high sensitivity of approximately 33151.9 MHz·mm2·μg−1, which is about 1011 times higher than that of a conventional quartz crystal microbalance (QCM) and about 4000 times higher than that of a conventional SAW device with a frequency of 978 MHz.展开更多
It has been proven that the increase in the productivity of the gin machine necessarily occurs along with the increase in the density of the raw material. However, with increasing density, productivity increases up to...It has been proven that the increase in the productivity of the gin machine necessarily occurs along with the increase in the density of the raw material. However, with increasing density, productivity increases up to a certain limit, and then productivity begins to decrease. In this article, the authors analyzed the scientific work on improving the quality of fiber.展开更多
基金Funded by the National Natural Science Foundation of China(No.52378213)the Technology Development Project(No.20201902977180010) of CABR Technology Co.,Ltd。
文摘To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs) formed by basalt saw mud under autoclave curing in ordinary structural concrete.In our work,two types of prewetted functional aggregates were taken as replacements for natural aggregates with different volume substitution rates(0%,5%,10%,15%,20%,25%,and 30%) in the preparation of ordinary structural concrete with water-to-binder ratios(W/B) of 0.48 and 0.33.The effects of the functional aggregate properties and content,W/B,and curing age on the fluidity,density,mechanical properties and autogenous shrinkage of ordinary concrete were analyzed.The experimental results showed that the density of concrete declined at a rate of not more than 5%,and the 28 d compressive strength could reach 31.0-68.2 MPa.Low W/B,long curing age and high-quality functional aggregates were conducive to enhancing the mechanical properties of SPFAs concrete.Through the rolling effects,SPFAs can optimize the particle gradation of aggregate systems and improve the fluidity of concrete,and the water stored inside SPFAs provides an internal curing effect,which prolongs the cement hydration process and considerably reduces the autogenous shrinkage of concrete.SPFAs exhibits high strength and high density,as well as being more cost-effective and ecological,and is expected to be widely employed in ordinary structural concrete.
文摘Soil salinity is a major limiting factor for crop production in coastal areas of Bangladesh. Cheap and sustainable management of soil salinity is hence most sought out topics in agricultural research. Conceptualizing that idea in mind, a pot experiment was conducted in the Department of Soil, Water & Environment, University of Dhaka in order to analyze if common organic amendments (rice straw, saw dust) coupled with reduce photoperiod can mitigate salinity effect on the growth of bean (Phaseolus vulgaris). The experiment was set up following completely randomized design (CRD) with nine treatments and three replications containing Tc (Control), T1 (Ambient photoperiod + 110 mM Salinity treatment + Rice straw), T2 (Reduced photoperiod + 110 mM Salinity treatment + Rice straw), T3 (Ambient photoperiod + 220 mM Salinity treatment + Rice straw), T4 (Reduced photoperiod + 220 mM Salinity treatment + Rice straw), T5 (Ambient photoperiod + 110 mM Salinity treatment + Saw dust), T6 (Reduced photoperiod + 110 mM Salinity treatment + Saw dust), T7 (Ambient photoperiod + 220 mM Salinity treatment + Saw dust) and T8 (Reduced photoperiod + 220 mM Salinity treatment + Saw dust). Organic amendments were used separately at the rate of 12 ton/ha. The highest plant height (98.67 cm), root length (12.5 cm), pod number (10.33), leaf area (13.99 cm2), fresh weight (680 kg/ha), dry weight (316.67 kg/ha) were recorded with the treatment T1 while the second-best treatment was treatment T2 (with highest harvest index 0.040) and these results were statistically significant (p < 0.001). In post-harvest soil, pH, EC, OC, OM;available N, P, K, S;total Ca, Mg, Zn, Mn were increased significantly in treatment T1. The overall results illustrated that the best growth and yield performances were achieved in the treatment T1 and T2.
基金supported by the National Science Foundation of China(NSFC)(52075162)the Program of New and High-Tech Industry of Hunan Province(2020GK2015 and 2021GK4014)+5 种基金the Excellent Youth Fund of Hunan Province(2021JJ20018)the Key Program of Guangdong(2020B0101040002)the Joint Fund of the Ministry of Education(Young Talents)the Natural Science Foundation of Changsha(kq2007026)the Tianjin Enterprise Science and Technology Commissioner Project(19JCTPJC56200)the Engineering Physics and Science Research Council of the United Kingdom(EPSRC EP/P018998/1).
文摘Surface acoustic wave (SAW) technology has been extensively explored for wireless communication, sensors, microfluidics, photonics, and quantum information processing. However, due to fabrication issues, the frequencies of SAW devices are typically limited to within a few gigahertz, which severely restricts their applications in 5G communication, precision sensing, photonics, and quantum control. To solve this critical problem, we propose a hybrid strategy that integrates a nanomanufacturing process (i.e., nanolithography) with a LiNbO_(3)/SiO_(2)/SiC heterostructure and successfully achieve a record-breaking frequency of about 44 GHz for SAW devices, in addition to large electromechanical coupling coefficients of up to 15.7%. We perform a theoretical analysis and identify the guided higher order wave modes generated on these slow-on-fast SAW platforms. To demonstrate the superior sensing performance of the proposed ultra-high-frequency SAW platforms, we perform micro-mass sensing and obtain an extremely high sensitivity of approximately 33151.9 MHz·mm2·μg−1, which is about 1011 times higher than that of a conventional quartz crystal microbalance (QCM) and about 4000 times higher than that of a conventional SAW device with a frequency of 978 MHz.
文摘It has been proven that the increase in the productivity of the gin machine necessarily occurs along with the increase in the density of the raw material. However, with increasing density, productivity increases up to a certain limit, and then productivity begins to decrease. In this article, the authors analyzed the scientific work on improving the quality of fiber.
