Alkali and alkaline‐earth metals from fly ash have a significant deactivation effect on catalysts used for selective catalytic reduction of NOx by NH3(NH3‐SCR).Bromides are considered effective additives to improve ...Alkali and alkaline‐earth metals from fly ash have a significant deactivation effect on catalysts used for selective catalytic reduction of NOx by NH3(NH3‐SCR).Bromides are considered effective additives to improve Hg0 oxidation on SCR catalysts.In this work,the effects of different bromides(NH4Br,NaBr,KBr,and CaBr2)on a commercial V2O5‐WO3/TiO2 catalyst were studied.NOx conversion decreased significantly over the KBr‐poisoned catalyst(denoted as L‐KBr),while that over NaBr‐and CaBr2‐poisoned catalysts(denoted as L‐NaBr and L‐CaBr,respectivity)decreased to a lesser extent compared with the fresh sample.Poor N2 selectivity was observed over L‐NaBr,L‐KBr and L‐CaBr catalysts.The decrease in the ratio of chemisorbed oxygen to total surface oxygen(Oα/(Oα+Oβ+Ow)),reducibility and surface acidity might contribute to the poor activity and N2 selectivity over L‐KBr catalyst.The increased Oαratio was conducive to the enhanced reducibility of L‐CaBr.Combined with enhanced surface acidity,this might offset the negative effect of the loss of active sites by CaBr2 covering.The overoxidation of NH3 and poor N2 selectivity in NH3 oxidation should retard the SCR activity at high temperatures over L‐CaBr catalyst.The increased basicity might contribute to increased NOx adsorption on L‐KBr and L‐CaBr catalysts.A correlation between the acid‐basic and redox properties of bromide‐poisoned catalysts and their catalytic properties is established.展开更多
Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic...Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.展开更多
In order to improve the ability of SCR catalyst to catalyze the oxidation of gaseous elemental mercury,a series of novel Ce modified SCR(Selection Catalytic Reduction,V_(2)O_(5)-WO_(3)/TiO_(2))catalysts were prepared ...In order to improve the ability of SCR catalyst to catalyze the oxidation of gaseous elemental mercury,a series of novel Ce modified SCR(Selection Catalytic Reduction,V_(2)O_(5)-WO_(3)/TiO_(2))catalysts were prepared via two-step ultrasonic impregnation method.The performance of Ce/SCR catalysts on Hg^(0)oxidation and NO reduction as well as the catalytic mechanism on Hg^(0)oxidation was also studied.The XRD,BET measurements and XPS were used to characterize the catalysts.The results showed that the pore volume and pore size of catalyst was reduced by Ce doping,and the specific surface area decreased with the increase of Ce content in catalyst.The performance on Hg^(0)oxidation was promoted by the introduction of CeO_(2).Ce_(1)/SCR(1%Ce,wt.%)catalyst exhibited the best Hg^(0)oxidation activity of 21.2%higher than that of SCR catalyst at 350℃,of which the NO conversion efficiency was also higher at 200-400℃.Furthermore,Ce_(1)/SCR showed a better H_(2)O resistance but a slightly weaker SO_(2)resistance than SCR catalyst.The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO_(2).The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO_(2).The Ce_(1)/SCR possed better redox ability compared with SCR catalyst.HCl was the most effective gas responsible for the Hg^(0)oxidation,and the redox cycle(V^(4+)+Ce^(4+)←→V^(5+)+Ce^(3+))played an important role in promoting Hg^(0)oxidation.展开更多
基金supported by the National Key R&D Program of China(2016YFC0203900,2016YFC0203901)National Natural Science Foundation of China(51778619,21577173)~~
文摘Alkali and alkaline‐earth metals from fly ash have a significant deactivation effect on catalysts used for selective catalytic reduction of NOx by NH3(NH3‐SCR).Bromides are considered effective additives to improve Hg0 oxidation on SCR catalysts.In this work,the effects of different bromides(NH4Br,NaBr,KBr,and CaBr2)on a commercial V2O5‐WO3/TiO2 catalyst were studied.NOx conversion decreased significantly over the KBr‐poisoned catalyst(denoted as L‐KBr),while that over NaBr‐and CaBr2‐poisoned catalysts(denoted as L‐NaBr and L‐CaBr,respectivity)decreased to a lesser extent compared with the fresh sample.Poor N2 selectivity was observed over L‐NaBr,L‐KBr and L‐CaBr catalysts.The decrease in the ratio of chemisorbed oxygen to total surface oxygen(Oα/(Oα+Oβ+Ow)),reducibility and surface acidity might contribute to the poor activity and N2 selectivity over L‐KBr catalyst.The increased Oαratio was conducive to the enhanced reducibility of L‐CaBr.Combined with enhanced surface acidity,this might offset the negative effect of the loss of active sites by CaBr2 covering.The overoxidation of NH3 and poor N2 selectivity in NH3 oxidation should retard the SCR activity at high temperatures over L‐CaBr catalyst.The increased basicity might contribute to increased NOx adsorption on L‐KBr and L‐CaBr catalysts.A correlation between the acid‐basic and redox properties of bromide‐poisoned catalysts and their catalytic properties is established.
基金Project(201031)supported by the Environmental Protection Scientific Research of Jiangsu Province,ChinaProject(BE2010184)supported by the Technology Support Program of Jiangsu Province-Industrial Parts,China
文摘Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.
基金This work was supported by the National Key Research and Development Program of China(No.2016YFB0600603).
文摘In order to improve the ability of SCR catalyst to catalyze the oxidation of gaseous elemental mercury,a series of novel Ce modified SCR(Selection Catalytic Reduction,V_(2)O_(5)-WO_(3)/TiO_(2))catalysts were prepared via two-step ultrasonic impregnation method.The performance of Ce/SCR catalysts on Hg^(0)oxidation and NO reduction as well as the catalytic mechanism on Hg^(0)oxidation was also studied.The XRD,BET measurements and XPS were used to characterize the catalysts.The results showed that the pore volume and pore size of catalyst was reduced by Ce doping,and the specific surface area decreased with the increase of Ce content in catalyst.The performance on Hg^(0)oxidation was promoted by the introduction of CeO_(2).Ce_(1)/SCR(1%Ce,wt.%)catalyst exhibited the best Hg^(0)oxidation activity of 21.2%higher than that of SCR catalyst at 350℃,of which the NO conversion efficiency was also higher at 200-400℃.Furthermore,Ce_(1)/SCR showed a better H_(2)O resistance but a slightly weaker SO_(2)resistance than SCR catalyst.The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO_(2).The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO_(2).The Ce_(1)/SCR possed better redox ability compared with SCR catalyst.HCl was the most effective gas responsible for the Hg^(0)oxidation,and the redox cycle(V^(4+)+Ce^(4+)←→V^(5+)+Ce^(3+))played an important role in promoting Hg^(0)oxidation.
