Sustainable recycling of titanium from TiO_(2) in spent SCR denitration catalyst via molten salt electrolysis

Spent catalyst used for denitration by selective catalytic reduction(spent SCR denitration catalysts) is one of the important urban mines due to the high content of TiO_(2)(~85 wt%) and the massive accumulation amount(over 100,000 tons),therefore,value-added reutilization of titanium in spent SCR catalysts is considerably meaningful.In this paper,a novel method is proposed for converting the titanium oxide in spent SCR denitration catalysts to metallic titanium.Specifically,titanium dioxide(TiO_(2)) was firstly obtained from spent SCR denitration catalysts after removing the impurities by hydrometallurgy process.Then,TiO_(2) is converted to Ti_(2)CO by carbothermic reduction method,and Ti_(2)CO was further purified by oleic acid capture.Finally,by utilizing the as-prepared Ti_(2)CO as the consumable anode in the NaCl-KCl molten salt,high-purity metallic titanium was deposited at cathode,all confirming the feasibility for the conversion of low-grade TiO_(2) in the spent catalysts,from 60 wt% to high-purity metallic Ti(99.5 wt%), furthermore,the energy consumption of this process is 3950 kWh tonne-1 Ti,which is lower than that of most traditional titanium metallurgy methods.The method herein can provide new insights for the value-added recycling of titanium resources in urban mines.

NH_3-SCR denitration catalyst performance over vanadium–titanium with the addition of Ce and Sb

Selective catalytic reduction technology using NH3 as a reducing agent（NH3-SCR） is an effective control method to remove nitrogen oxides. TiO2-supported vanadium oxide catalysts with different levels of Ce and Sb modification were prepared by an impregnation method and were characterized by X-ray diffractometer（XRD）, Brunauer-Emmett-Teller（BET）, Transmission electron microscopy（TEM）, Fourier transform infrared spectroscopy（FT-IR）, UV-Vis diffuse reflectance spectroscopy（UV-Vis DRS）, Raman and Hydrogen temperature-programmed reduction（H2-TPR）. The catalytic activities of V5 CexS by/TiO2 catalysts for denitration were investigated in a fixed bed flow microreactor. The results showed that cerium, vanadium and antimony oxide as the active components were well dispersed on TiO2, and the catalysts exhibited a large number of d-d electronic transitions, which were helpful to strengthen SCR reactivity. The V5 CexS by/TiO2 catalysts exhibited a good low temperature NH3-SCR catalytic activity. In the temperature range of 210 to 400℃, the V5 CexS by/TiO2 catalysts gave NO conversion rates above 90%. For the best V5Ce35Sb2/TiO2 catalyst, at a reaction temperature of 210℃, the NO conversion rate had already reached 90%. The catalysts had different catalytic activity with different Ce loadings. With the increase of Ce loading, the NO conversion rate also increased.

Denitration Performance of Modifi ed AC Loaded with Nano V_2O_5 with Different Morphologies

A series of V2O5 with various morphologies was prepared by the hydrothermal method and loaded on the modified active coke（AC） which was prepared by the impregnation methods. The prepared samples were characterized by BET, Boehm titration test, XRD, SEM and EDS. The SEM exhibited that the morphologies of the samples prepared were signifi cantly different from each other. Then the samples prepared were studied on the selective catalytic reduction（SCR） of NO with ammonia in the presence of oxygen. The SCR activity measurements were undertaken in a fixed-bed unit with a sieve plate in the middle. From the contrastive experiments, the results showed that linear V2O5/AC had the best denitration performance and the denitration rate was up to 57.41%. It was speculated that the linear V2O5 with the crystal faces（110） may show the best performance in SCR. And the durability results also showed that linear V2O5/AC produced a denitration rate of 47.7% after three regenerations.