The rock mass engineering system (RMES) basically consists ofrock mass engineering (RME), water system and surroundingecological environments, etc. The RMES is characterized by nonlinearity,occurrence of chaos and...The rock mass engineering system (RMES) basically consists ofrock mass engineering (RME), water system and surroundingecological environments, etc. The RMES is characterized by nonlinearity,occurrence of chaos and self-organization (Tazaka, 1998;Tsuda, 1998; Kishida, 2000). From construction to abandonmentof RME, the RMES will experience four stages, i.e. initial phase,development phase, declining phase and failure phase. In thiscircumstance, the RMES boundary conditions, structural safetyand surrounding environments are varied at each phase, so arethe evolution characteristics and disasters (Wang et al., 2014).展开更多
This is an overview of the development of process systems engineering (PSE) in a smaller world. Two different spatio-temporal scopes are identified for microscale and nanoscale process systems. The features and challe...This is an overview of the development of process systems engineering (PSE) in a smaller world. Two different spatio-temporal scopes are identified for microscale and nanoscale process systems. The features and challenges for each scale are reviewed, and different methodologies used by them discussed. Comparison of these two new areas with traditional process systems engineering is described. If microscale PSE could be considered as an extension of traditional PSE, nanoscale PSE should be accepted as a new discipline which has looser connection with the extant core of chemical engineering. Since "molecular factories" is the next frontier of processing scale, nanoscale PSE will be the new theory to handle the design, simulation and operation of those active processing systems.展开更多
This survey paper provides a review and perspective on intermediate and advanced reinforcement learning(RL)techniques in process industries. It offers a holistic approach by covering all levels of the process control ...This survey paper provides a review and perspective on intermediate and advanced reinforcement learning(RL)techniques in process industries. It offers a holistic approach by covering all levels of the process control hierarchy. The survey paper presents a comprehensive overview of RL algorithms,including fundamental concepts like Markov decision processes and different approaches to RL, such as value-based, policy-based, and actor-critic methods, while also discussing the relationship between classical control and RL. It further reviews the wide-ranging applications of RL in process industries, such as soft sensors, low-level control, high-level control, distributed process control, fault detection and fault tolerant control, optimization,planning, scheduling, and supply chain. The survey paper discusses the limitations and advantages, trends and new applications, and opportunities and future prospects for RL in process industries. Moreover, it highlights the need for a holistic approach in complex systems due to the growing importance of digitalization in the process industries.展开更多
In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,in...In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,including insufficient time for practice,low management level,inadequate implementation of the double-supervisor system,and poor results of professional practice,has reduced the effectiveness of professional practice.In view of the aforementioned problems and the characteristics of the discipline,this paper proposes several strategies for improving the effectiveness of professional practice for postgraduates in mineral processing engineering.展开更多
The definitions, methodology, applications, and perspectives of process system engineering are discussed from a strategic point of view. The focal points in future development of process systems engineering are to bre...The definitions, methodology, applications, and perspectives of process system engineering are discussed from a strategic point of view. The focal points in future development of process systems engineering are to break through in methodology, to expand application fields, and to develop a new generation of process simulation systems.展开更多
Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this...Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.展开更多
Software Development Life Cycle (SDLC) is one of the major ingredients for the development of efficient software systems within a time frame and low-cost involvement. From the literature, it is evident that there are ...Software Development Life Cycle (SDLC) is one of the major ingredients for the development of efficient software systems within a time frame and low-cost involvement. From the literature, it is evident that there are various kinds of process models that are used by the software industries for the development of small, medium and long-term software projects, but many of them do not cover risk management. It is quite obvious that the improper selection of the software development process model leads to failure of the software products as it is time bound activity. In the present work, a new software development process model is proposed which covers the risks at any stage of the development of the software product. The model is named a Hemant-Vipin (HV) process model and may be helpful for the software industries for development of the efficient software products and timely delivery at the end of the client. The efficiency of the HV process model is observed by considering various kinds of factors like requirement clarity, user feedback, change agility, predictability, risk identification, practical implementation, customer satisfaction, incremental development, use of ready-made components, quick design, resource organization and many more and found through a case study that the presented approach covers many of parameters in comparison of the existing process models. .展开更多
In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expan...In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expansion of highway construction,power supply,and distribution has led to several challenges in mechanical and electrical engineering technology.Ensuring the safe,stable,and cost-effective operation of the power supply and distribution system to meet the diverse requirements of highway operations has become a pressing issue.This article takes an example of a highway electromechanical engineering power supply and distribution construction project to provide insight into the construction process of highway electromechanical engineering power supply and distribution technology.展开更多
The challenges posed by smart manufacturing for the process industries and for process systems engineering(PSE) researchers are discussed in this article. Much progress has been made in achieving plant- and site-wid...The challenges posed by smart manufacturing for the process industries and for process systems engineering(PSE) researchers are discussed in this article. Much progress has been made in achieving plant- and site-wide optimization, hut benchmarking would give greater confidence. Technical challenges confrontingprocess systems engineers in developing enabling tools and techniques are discussed regarding flexibilityand uncertainty, responsiveness and agility, robustness and security, the prediction of mixture propertiesand function, and new modeling and mathematics paradigms. Exploiting intelligence from big data to driveagility will require tackling new challenges, such as how to ensure the consistency and confidentiality ofdata through long and complex supply chains. Modeling challenges also exist, and involve ensuring that allkey aspects are properly modeled, particularly where health, safety, and environmental concerns requireaccurate predictions of small but critical amounts at specific locations. Environmental concerns will requireus to keep a closer track on all molecular species so that they are optimally used to create sustainablesolutions. Disruptive business models may result, particularly from new personalized products, but that isdifficult to predict.展开更多
The present risk analysis model of engineering investment is built by fuzzy hierarchy approach under the assumption of maximizing the revenues of the project during its whole life cycle of operation. It can reasonably...The present risk analysis model of engineering investment is built by fuzzy hierarchy approach under the assumption of maximizing the revenues of the project during its whole life cycle of operation. It can reasonably be expressed by a system evaluation analysis. As a matter of fact, the system, aimed by its system goal can be modelled by a set of factors, constitutively structured by certain links between them, to form a factorial network chart, which represents the essentials of the system behaviours, the nodes of which represent the factors concerned. The weight distribution between factors located at the same level can be determined by the eigen-value problem of a 'pair comparison' relation matrix. The weight distribution of factors at each level is successively manipulated until the fuzzy synthetic risk assessment. As an example of risk analysis of engineering investment, a harbour construction project is presented for illustration.展开更多
After nearly one hundred years of research, metallurgy(metallurgical science and engineering) has gradually become a system with three levels of knowledge:(1) micro metallurgy at the atomic/molecular scale,(2) process...After nearly one hundred years of research, metallurgy(metallurgical science and engineering) has gradually become a system with three levels of knowledge:(1) micro metallurgy at the atomic/molecular scale,(2) process metallurgy at the procedure/device, and(3) macrodynamic metallurgy at the full process/process group. Macro-dynamic metallurgy development must eliminate the concept of an "isolated system" and establish concepts of "flow," "process network," and "operating program" to study the "structure–function–efficiency" in the macrodynamic operation of metallurgical manufacturing processes. It means considering "flow" as the ontology and observing dynamic change by"flow" to solve the green and intelligent potential of metallurgical enterprises. Metallurgical process engineering is integrated metallurgy, toplevel designed metallurgy, macro-dynamic operated metallurgy, and engineering science level metallurgy. Metallurgical process engineering is a cross-level, comprehensive, and integrated study of the macro-dynamic operation of manufacturing processes. Metallurgical process engineering studies the physical nature and constitutive characteristics of the dynamic operation of steel manufacturing process, as well as the analysis-optimization of the set of procedure functions, coordination-optimization of the set of procedures' relations, and reconstruction-optimization of the set of procedures in the manufacturing process. The study establishes rules for the macro operation of the manufacturing process, as well as dynamic and precise objectives of engineering design and production operation.展开更多
Perforation of tympanic membrane is one of the main reasons for both deafness and dyssaudia.We could improve and restore audition by restoring or replacing the tympanic membrane.So,whether you can make the spurious ty...Perforation of tympanic membrane is one of the main reasons for both deafness and dyssaudia.We could improve and restore audition by restoring or replacing the tympanic membrane.So,whether you can make the spurious tympanic membrane successfully is one of the keys to a successful operation.Utilizing CMM (Coordinate Measuring Machine) measurement equipment, we measured tympanic membrane model precisely and digitally.We also analysed the measured data by point to surface and we have successfully reconstructed the CAD model of the spurious tympanic membrane.Using the model we have got,we schemed out the mold of spurious tympanic membrane.In addition,we utilized MasterCAM compiling CNC (Computerized Numerical Con- trol) code and simulating the course of working.Ultimately,we obtained the mold of spurious tympanic membrane.Our research in this article has great significance to the success of spurious tympanic membrane grafting operation.展开更多
Interactions involving chemical reagents,solid particles,gas bubbles,liquid droplets,and solid surfaces in complex fluids play a vital role in many engineering processes,such as froth flotation,emulsion and foam forma...Interactions involving chemical reagents,solid particles,gas bubbles,liquid droplets,and solid surfaces in complex fluids play a vital role in many engineering processes,such as froth flotation,emulsion and foam formation,adsorption,and fouling and anti-fouling phenomena.These interactions at the molecular,nano-,and micro scale significantly influence and determine the macroscopic performance and efficiency of related engineering processes.Understanding the intermolecular and surface interactions in engineering processes is of both fundamental and practical importance,which not only improves production technologies,but also provides valuable insights into the development of new materials.In this review,the typical intermolecular and surface interactions involved in various engineering processes,including Derjaguin–Landau–Verwey–Overbeek(DLVO)interactions(i.e.,van der Waals and electrical doublelayer interactions)and non-DLVO interactions,such as steric and hydrophobic interactions,are first introduced.Nanomechanical techniques such as atomic force microscopy and surface forces apparatus for quantifying the interaction forces of molecules and surfaces in complex fluids are briefly introduced.Our recent progress on characterizing the intermolecular and surface interactions in several engineering systems are reviewed,including mineral flotation,petroleum engineering,wastewater treatment,and energy storage materials.The correlation of these fundamental interaction mechanisms with practical applications in resolving engineering challenges and the perspectives of the research field have also been discussed.展开更多
In recent years,it is the general trend to adopt the standards of international engineering education certification to construct curriculum.“Software Process and Tools”is one of the core courses of Harbin Institute ...In recent years,it is the general trend to adopt the standards of international engineering education certification to construct curriculum.“Software Process and Tools”is one of the core courses of Harbin Institute of Technology’s software engineering undergraduate training program.Focusing on the construction work and practical exploration of the course in the process of reforming the software engineering professional curriculum system,and how to achieve the standards of engineering education certification,This paper makes a review and summary.This paper focuses on the status and the role of the course in the whole curriculum system,as well as project-driven teaching content design and practical teaching methods.And summarizes the experience and results of 3 rounds of teaching practice.展开更多
This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch fr...This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch from proton exchange membranes(PEMs) to hydroxide exchange membranes(HEMs) may lead to a new-generation of affordable electrochemical energy devices including fuel cells, electrolyzers, and solar hydrogen generators. For lithium-ion batteries, a series of advancements in design and chemistry are required for electric vehicle and energy storage applications. Manufacturing process development and optimization of the LiF eP O_4/C cathode materials and several emerging novel anode materials are also discussed using the authors' work as examples.Design and manufacturing process of lithium-ion battery electrodes are introduced in detail, and modeling and optimization of large-scale lithium-ion batteries are also presented. Electrochemical energy materials and device innovations can be further prompted by better understanding of the fundamental transport phenomena involved in unit operations.展开更多
Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and ...Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and virtual manufacturing is an- alyzed.The structure and content of machining process data concerning green manufacturing is also examined.A logic model of Machining Process Data has been built based on an object oriented approach,using UML technology and a physical model of machin- ing process data that utilizes XML technology.To realize the integration of design and process,an approach based on graph-based volume decomposition was apposed.Instead,to solve the problem of generation in the machining process,case-based reasoning and rule-based reasoning have been applied synthetically.Finally,the integration framework and interface that deal with the CAPP integration with CAD,CAM,PDM,and ERP are discussed.展开更多
This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process e...This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process engineering consulting(international terminology full-life cycle engineering consultant).Second,discuss the government’s role in the development of engineering consulting from two aspects:service management and market access.Finally,combined with the above analysis,the specific problems faced in the implementation process of the whole process engineering consulting are compared.Provide relevant suggestions on how companies and individuals respond to industry development trends.展开更多
For systematical NVH development of vehicle (especially for mass-production passenger vehicles) electric powertrain, an optimized V-Model is designed and has been implemented in the entire component-vehicle developmen...For systematical NVH development of vehicle (especially for mass-production passenger vehicles) electric powertrain, an optimized V-Model is designed and has been implemented in the entire component-vehicle development, which integrates three individual branches: simulation, validation and optimization. Compared to the V-models in the traditional sense, this optimized V-model is not only driven by requirement and task accomplishment but also maximum optimization of NVH system performance. In this case, developing procedures are capable to be efficiently iterated and the NVH engineering can be expanded into 3D with this V-model.展开更多
Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on th...Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.展开更多
The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emiss...The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emissions.Developing high-efficient,low-cost,energy-efficient and eco-friendly microfluidicbased microchemical engineering is of great significance.Such kind of“green microfluidics”can reduce carbon emissions from the source of raw materials and facilitate controllable and intensified microchemical engineering processes,which represents the new power for the transformation and upgrading of chemical engineering industry.Here,a brief review of green microfluidics for achieving carbon neutral microchemical engineering is presented,with specific discussions about the characteristics and feasibility of applying green microfluidics in realizing carbon neutrality.Development of green microfluidic systems are categorized and reviewed,including the construction of microfluidic devices by bio-based substrate materials and by low carbon fabrication methods,and the use of more biocompatible and nondestructive fluidic systems such as aqueous two-phase systems(ATPSs).Moreover,low carbon applications benefit from green microfluidics are summarized,ranging from separation and purification of biomolecules,high-throughput screening of chemicals and drugs,rapid and cost-effective detections,to synthesis of fine chemicals and novel materials.Finally,challenges and perspectives for further advancing green microfluidics in microchemical engineering for carbon neutrality are proposed and discussed.展开更多
基金funded by the National Natural Science Foundation of China(Grant Nos.51274110,51304108,U1361211)
文摘The rock mass engineering system (RMES) basically consists ofrock mass engineering (RME), water system and surroundingecological environments, etc. The RMES is characterized by nonlinearity,occurrence of chaos and self-organization (Tazaka, 1998;Tsuda, 1998; Kishida, 2000). From construction to abandonmentof RME, the RMES will experience four stages, i.e. initial phase,development phase, declining phase and failure phase. In thiscircumstance, the RMES boundary conditions, structural safetyand surrounding environments are varied at each phase, so arethe evolution characteristics and disasters (Wang et al., 2014).
文摘This is an overview of the development of process systems engineering (PSE) in a smaller world. Two different spatio-temporal scopes are identified for microscale and nanoscale process systems. The features and challenges for each scale are reviewed, and different methodologies used by them discussed. Comparison of these two new areas with traditional process systems engineering is described. If microscale PSE could be considered as an extension of traditional PSE, nanoscale PSE should be accepted as a new discipline which has looser connection with the extant core of chemical engineering. Since "molecular factories" is the next frontier of processing scale, nanoscale PSE will be the new theory to handle the design, simulation and operation of those active processing systems.
基金supported in part by the Natural Sciences Engineering Research Council of Canada (NSERC)。
文摘This survey paper provides a review and perspective on intermediate and advanced reinforcement learning(RL)techniques in process industries. It offers a holistic approach by covering all levels of the process control hierarchy. The survey paper presents a comprehensive overview of RL algorithms,including fundamental concepts like Markov decision processes and different approaches to RL, such as value-based, policy-based, and actor-critic methods, while also discussing the relationship between classical control and RL. It further reviews the wide-ranging applications of RL in process industries, such as soft sensors, low-level control, high-level control, distributed process control, fault detection and fault tolerant control, optimization,planning, scheduling, and supply chain. The survey paper discusses the limitations and advantages, trends and new applications, and opportunities and future prospects for RL in process industries. Moreover, it highlights the need for a holistic approach in complex systems due to the growing importance of digitalization in the process industries.
基金This work was supported by The Graduate Education and Teaching Reform Project of CUMTB(YJG202200301)The Yueqi Outstanding Scholar Award of CUMTB and Science and Technology Major Project of Ordos City-Iconic Innovation Team(202204).
文摘In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,including insufficient time for practice,low management level,inadequate implementation of the double-supervisor system,and poor results of professional practice,has reduced the effectiveness of professional practice.In view of the aforementioned problems and the characteristics of the discipline,this paper proposes several strategies for improving the effectiveness of professional practice for postgraduates in mineral processing engineering.
文摘The definitions, methodology, applications, and perspectives of process system engineering are discussed from a strategic point of view. The focal points in future development of process systems engineering are to break through in methodology, to expand application fields, and to develop a new generation of process simulation systems.
基金the Scientific research and technology development project of Petro China(2021DJ5303)。
文摘Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.
文摘Software Development Life Cycle (SDLC) is one of the major ingredients for the development of efficient software systems within a time frame and low-cost involvement. From the literature, it is evident that there are various kinds of process models that are used by the software industries for the development of small, medium and long-term software projects, but many of them do not cover risk management. It is quite obvious that the improper selection of the software development process model leads to failure of the software products as it is time bound activity. In the present work, a new software development process model is proposed which covers the risks at any stage of the development of the software product. The model is named a Hemant-Vipin (HV) process model and may be helpful for the software industries for development of the efficient software products and timely delivery at the end of the client. The efficiency of the HV process model is observed by considering various kinds of factors like requirement clarity, user feedback, change agility, predictability, risk identification, practical implementation, customer satisfaction, incremental development, use of ready-made components, quick design, resource organization and many more and found through a case study that the presented approach covers many of parameters in comparison of the existing process models. .
文摘In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expansion of highway construction,power supply,and distribution has led to several challenges in mechanical and electrical engineering technology.Ensuring the safe,stable,and cost-effective operation of the power supply and distribution system to meet the diverse requirements of highway operations has become a pressing issue.This article takes an example of a highway electromechanical engineering power supply and distribution construction project to provide insight into the construction process of highway electromechanical engineering power supply and distribution technology.
文摘The challenges posed by smart manufacturing for the process industries and for process systems engineering(PSE) researchers are discussed in this article. Much progress has been made in achieving plant- and site-wide optimization, hut benchmarking would give greater confidence. Technical challenges confrontingprocess systems engineers in developing enabling tools and techniques are discussed regarding flexibilityand uncertainty, responsiveness and agility, robustness and security, the prediction of mixture propertiesand function, and new modeling and mathematics paradigms. Exploiting intelligence from big data to driveagility will require tackling new challenges, such as how to ensure the consistency and confidentiality ofdata through long and complex supply chains. Modeling challenges also exist, and involve ensuring that allkey aspects are properly modeled, particularly where health, safety, and environmental concerns requireaccurate predictions of small but critical amounts at specific locations. Environmental concerns will requireus to keep a closer track on all molecular species so that they are optimally used to create sustainablesolutions. Disruptive business models may result, particularly from new personalized products, but that isdifficult to predict.
文摘The present risk analysis model of engineering investment is built by fuzzy hierarchy approach under the assumption of maximizing the revenues of the project during its whole life cycle of operation. It can reasonably be expressed by a system evaluation analysis. As a matter of fact, the system, aimed by its system goal can be modelled by a set of factors, constitutively structured by certain links between them, to form a factorial network chart, which represents the essentials of the system behaviours, the nodes of which represent the factors concerned. The weight distribution between factors located at the same level can be determined by the eigen-value problem of a 'pair comparison' relation matrix. The weight distribution of factors at each level is successively manipulated until the fuzzy synthetic risk assessment. As an example of risk analysis of engineering investment, a harbour construction project is presented for illustration.
文摘After nearly one hundred years of research, metallurgy(metallurgical science and engineering) has gradually become a system with three levels of knowledge:(1) micro metallurgy at the atomic/molecular scale,(2) process metallurgy at the procedure/device, and(3) macrodynamic metallurgy at the full process/process group. Macro-dynamic metallurgy development must eliminate the concept of an "isolated system" and establish concepts of "flow," "process network," and "operating program" to study the "structure–function–efficiency" in the macrodynamic operation of metallurgical manufacturing processes. It means considering "flow" as the ontology and observing dynamic change by"flow" to solve the green and intelligent potential of metallurgical enterprises. Metallurgical process engineering is integrated metallurgy, toplevel designed metallurgy, macro-dynamic operated metallurgy, and engineering science level metallurgy. Metallurgical process engineering is a cross-level, comprehensive, and integrated study of the macro-dynamic operation of manufacturing processes. Metallurgical process engineering studies the physical nature and constitutive characteristics of the dynamic operation of steel manufacturing process, as well as the analysis-optimization of the set of procedure functions, coordination-optimization of the set of procedures' relations, and reconstruction-optimization of the set of procedures in the manufacturing process. The study establishes rules for the macro operation of the manufacturing process, as well as dynamic and precise objectives of engineering design and production operation.
文摘Perforation of tympanic membrane is one of the main reasons for both deafness and dyssaudia.We could improve and restore audition by restoring or replacing the tympanic membrane.So,whether you can make the spurious tympanic membrane successfully is one of the keys to a successful operation.Utilizing CMM (Coordinate Measuring Machine) measurement equipment, we measured tympanic membrane model precisely and digitally.We also analysed the measured data by point to surface and we have successfully reconstructed the CAD model of the spurious tympanic membrane.Using the model we have got,we schemed out the mold of spurious tympanic membrane.In addition,we utilized MasterCAM compiling CNC (Computerized Numerical Con- trol) code and simulating the course of working.Ultimately,we obtained the mold of spurious tympanic membrane.Our research in this article has great significance to the success of spurious tympanic membrane grafting operation.
文摘Interactions involving chemical reagents,solid particles,gas bubbles,liquid droplets,and solid surfaces in complex fluids play a vital role in many engineering processes,such as froth flotation,emulsion and foam formation,adsorption,and fouling and anti-fouling phenomena.These interactions at the molecular,nano-,and micro scale significantly influence and determine the macroscopic performance and efficiency of related engineering processes.Understanding the intermolecular and surface interactions in engineering processes is of both fundamental and practical importance,which not only improves production technologies,but also provides valuable insights into the development of new materials.In this review,the typical intermolecular and surface interactions involved in various engineering processes,including Derjaguin–Landau–Verwey–Overbeek(DLVO)interactions(i.e.,van der Waals and electrical doublelayer interactions)and non-DLVO interactions,such as steric and hydrophobic interactions,are first introduced.Nanomechanical techniques such as atomic force microscopy and surface forces apparatus for quantifying the interaction forces of molecules and surfaces in complex fluids are briefly introduced.Our recent progress on characterizing the intermolecular and surface interactions in several engineering systems are reviewed,including mineral flotation,petroleum engineering,wastewater treatment,and energy storage materials.The correlation of these fundamental interaction mechanisms with practical applications in resolving engineering challenges and the perspectives of the research field have also been discussed.
文摘In recent years,it is the general trend to adopt the standards of international engineering education certification to construct curriculum.“Software Process and Tools”is one of the core courses of Harbin Institute of Technology’s software engineering undergraduate training program.Focusing on the construction work and practical exploration of the course in the process of reforming the software engineering professional curriculum system,and how to achieve the standards of engineering education certification,This paper makes a review and summary.This paper focuses on the status and the role of the course in the whole curriculum system,as well as project-driven teaching content design and practical teaching methods.And summarizes the experience and results of 3 rounds of teaching practice.
基金Supported by the National Basic Research Program of China(2014CB239703)the National Natural Science Foundation of China(21336003)the Science and Technology Commission of Shanghai Municipality(14DZ2250800)
文摘This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch from proton exchange membranes(PEMs) to hydroxide exchange membranes(HEMs) may lead to a new-generation of affordable electrochemical energy devices including fuel cells, electrolyzers, and solar hydrogen generators. For lithium-ion batteries, a series of advancements in design and chemistry are required for electric vehicle and energy storage applications. Manufacturing process development and optimization of the LiF eP O_4/C cathode materials and several emerging novel anode materials are also discussed using the authors' work as examples.Design and manufacturing process of lithium-ion battery electrodes are introduced in detail, and modeling and optimization of large-scale lithium-ion batteries are also presented. Electrochemical energy materials and device innovations can be further prompted by better understanding of the fundamental transport phenomena involved in unit operations.
文摘Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and virtual manufacturing is an- alyzed.The structure and content of machining process data concerning green manufacturing is also examined.A logic model of Machining Process Data has been built based on an object oriented approach,using UML technology and a physical model of machin- ing process data that utilizes XML technology.To realize the integration of design and process,an approach based on graph-based volume decomposition was apposed.Instead,to solve the problem of generation in the machining process,case-based reasoning and rule-based reasoning have been applied synthetically.Finally,the integration framework and interface that deal with the CAPP integration with CAD,CAM,PDM,and ERP are discussed.
文摘This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process engineering consulting(international terminology full-life cycle engineering consultant).Second,discuss the government’s role in the development of engineering consulting from two aspects:service management and market access.Finally,combined with the above analysis,the specific problems faced in the implementation process of the whole process engineering consulting are compared.Provide relevant suggestions on how companies and individuals respond to industry development trends.
文摘For systematical NVH development of vehicle (especially for mass-production passenger vehicles) electric powertrain, an optimized V-Model is designed and has been implemented in the entire component-vehicle development, which integrates three individual branches: simulation, validation and optimization. Compared to the V-models in the traditional sense, this optimized V-model is not only driven by requirement and task accomplishment but also maximum optimization of NVH system performance. In this case, developing procedures are capable to be efficiently iterated and the NVH engineering can be expanded into 3D with this V-model.
文摘Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.
基金the supports of the National Science Foundation of China (22008130, 22025801)the China Postdoctoral Science Foundation (2020M682124)+1 种基金the Qingdao Postdoctoral Researchers Applied Research Project Foundation (RZ2000001426)the Scientific Research Foundation for Youth Scholars from Qingdao University (DC1900014265) for this work
文摘The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emissions.Developing high-efficient,low-cost,energy-efficient and eco-friendly microfluidicbased microchemical engineering is of great significance.Such kind of“green microfluidics”can reduce carbon emissions from the source of raw materials and facilitate controllable and intensified microchemical engineering processes,which represents the new power for the transformation and upgrading of chemical engineering industry.Here,a brief review of green microfluidics for achieving carbon neutral microchemical engineering is presented,with specific discussions about the characteristics and feasibility of applying green microfluidics in realizing carbon neutrality.Development of green microfluidic systems are categorized and reviewed,including the construction of microfluidic devices by bio-based substrate materials and by low carbon fabrication methods,and the use of more biocompatible and nondestructive fluidic systems such as aqueous two-phase systems(ATPSs).Moreover,low carbon applications benefit from green microfluidics are summarized,ranging from separation and purification of biomolecules,high-throughput screening of chemicals and drugs,rapid and cost-effective detections,to synthesis of fine chemicals and novel materials.Finally,challenges and perspectives for further advancing green microfluidics in microchemical engineering for carbon neutrality are proposed and discussed.