设计一种40.5 k V SF6压气式负荷开关柜,采用独特的压气式负荷开关,改良的开断断口在灭弧时降低了SF6化学反应产生的废弃物,具有充气压力低、开断容量大、使用寿命长、可实现"三遥"等配电自动化功能,且可依据不同的使用要求...设计一种40.5 k V SF6压气式负荷开关柜,采用独特的压气式负荷开关,改良的开断断口在灭弧时降低了SF6化学反应产生的废弃物,具有充气压力低、开断容量大、使用寿命长、可实现"三遥"等配电自动化功能,且可依据不同的使用要求灵活进行扩张和组合。该产品符合GB 11022和IEC 60376标准,通过了型式试验,并已应用于实际工程中,取得了良好的经济效益。展开更多
To improve the machinability of optical glass and achieve optical parts with satisfied surface quality and dimensional accuracy, scratching experiments with increasing cutting depth were conducted on glass SF6 to eval...To improve the machinability of optical glass and achieve optical parts with satisfied surface quality and dimensional accuracy, scratching experiments with increasing cutting depth were conducted on glass SF6 to evaluate the influence of cutting fluid properties on the machinability of glass. The sodium carbonate solution of 10.5% concentration was chosen as cutting fluid. Then the critical depths in scratching experiments with and without cutting fluid were examined. Based on this, turning experiments were carried out, and the surface quality of SF6 was assessed. Compared with the process of dry cutting, the main indexes of surface roughness decrease by over 70% totally. Experimental results indicated that the machinability of glass SF6 can be improved by using the sodium carbonate solution as cutting fluid.展开更多
The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the disc...The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the discharge plasma radiation from the different discharge gap regions in the gas pressure range （0.05-0.7 MPa） was established. It was shown that, the breakdown is occurred owing to the ionization wave, which starts from the electrode with small radius of curvature at both polarity of high voltage pulses. It is seen that formation of bright spots on the fiat electrode at the negative polarity of the electrode with small radius of curvature are observed during the changing of the discharge current polarity. It was shown that, at positive polarity of electrode with a small radius of curvature, the bright spots on the flat electrode arise due to the participation of the dynamic displacement current in the gap conductance.展开更多
In order to realize on-line quantitative detection on SF6 and effective control of nlnning state of SF6 high voltage power supply system, a concentrated SF6 quantitative ultrasonic on-line deteetion system has been de...In order to realize on-line quantitative detection on SF6 and effective control of nlnning state of SF6 high voltage power supply system, a concentrated SF6 quantitative ultrasonic on-line deteetion system has been developed based on the actual demand of electric power system consumers. There are four major characteristics in this system. Firstly, the gas of maximum 64 detection points is transferred through the specific air path to the detection devices to he detected and analyzed, thereby the electrical lines and the complicated installation of the collectors can be avoided; secondly, the differential technique is used to shield the influence of environmental factors, which effectively improves the accuracy of the acoustic detection; thirdly, the SF6 coneentration is determined by the speed and phase in the ultrasonic wave trans- mission process, therefore there is no secondary pollution for the purely physical means; finally, the ma- ture embedded technique is applied in this system to improve its intelligence and stability.展开更多
文摘设计一种40.5 k V SF6压气式负荷开关柜,采用独特的压气式负荷开关,改良的开断断口在灭弧时降低了SF6化学反应产生的废弃物,具有充气压力低、开断容量大、使用寿命长、可实现"三遥"等配电自动化功能,且可依据不同的使用要求灵活进行扩张和组合。该产品符合GB 11022和IEC 60376标准,通过了型式试验,并已应用于实际工程中,取得了良好的经济效益。
基金Supported by National Natural Science Foundation of China (No. 50775057)
文摘To improve the machinability of optical glass and achieve optical parts with satisfied surface quality and dimensional accuracy, scratching experiments with increasing cutting depth were conducted on glass SF6 to evaluate the influence of cutting fluid properties on the machinability of glass. The sodium carbonate solution of 10.5% concentration was chosen as cutting fluid. Then the critical depths in scratching experiments with and without cutting fluid were examined. Based on this, turning experiments were carried out, and the surface quality of SF6 was assessed. Compared with the process of dry cutting, the main indexes of surface roughness decrease by over 70% totally. Experimental results indicated that the machinability of glass SF6 can be improved by using the sodium carbonate solution as cutting fluid.
基金Acknowledgments The work was supported by the grant from the Russian Science Foundation, project No. 14-29-00052.
文摘The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the discharge plasma radiation from the different discharge gap regions in the gas pressure range （0.05-0.7 MPa） was established. It was shown that, the breakdown is occurred owing to the ionization wave, which starts from the electrode with small radius of curvature at both polarity of high voltage pulses. It is seen that formation of bright spots on the fiat electrode at the negative polarity of the electrode with small radius of curvature are observed during the changing of the discharge current polarity. It was shown that, at positive polarity of electrode with a small radius of curvature, the bright spots on the flat electrode arise due to the participation of the dynamic displacement current in the gap conductance.
基金Supported by the National Natural Science Foundation of China (No. 10574038)
文摘In order to realize on-line quantitative detection on SF6 and effective control of nlnning state of SF6 high voltage power supply system, a concentrated SF6 quantitative ultrasonic on-line deteetion system has been developed based on the actual demand of electric power system consumers. There are four major characteristics in this system. Firstly, the gas of maximum 64 detection points is transferred through the specific air path to the detection devices to he detected and analyzed, thereby the electrical lines and the complicated installation of the collectors can be avoided; secondly, the differential technique is used to shield the influence of environmental factors, which effectively improves the accuracy of the acoustic detection; thirdly, the SF6 coneentration is determined by the speed and phase in the ultrasonic wave trans- mission process, therefore there is no secondary pollution for the purely physical means; finally, the ma- ture embedded technique is applied in this system to improve its intelligence and stability.
