采用行星热壁式SiC外延炉对100 mm 4°偏轴4H-SiC衬底外延工艺进行了研究。分析了氢气预刻蚀工艺对4°偏轴衬底外延材料表面形貌的影响。采用双指标正交实验,通过极差分析的方法研究了C/Si比、Cl/Si比、主氢流量、生长温度、三...采用行星热壁式SiC外延炉对100 mm 4°偏轴4H-SiC衬底外延工艺进行了研究。分析了氢气预刻蚀工艺对4°偏轴衬底外延材料表面形貌的影响。采用双指标正交实验,通过极差分析的方法研究了C/Si比、Cl/Si比、主氢流量、生长温度、三路气体比等工艺参数对SiC外延厚度和掺杂浓度均匀性指标影响的主次顺序,并给出了优化的外延参数。采用该工艺条件制得的无台阶聚集形貌的SiC外延片片内厚度均匀性和浓度均匀性分别是1.23%和3.32%。展开更多
利用相同器件工艺在两种不同材料结构上制备了Al N/Ga N高电子迁移率晶体管(HEMT),研究了Al Ga N背势垒结构对器件特性的影响。测试结果表明,有背势垒结构的器件最大饱和电流密度和峰值跨导要小于无背势垒结构器件,栅压偏置为+1 V时,无...利用相同器件工艺在两种不同材料结构上制备了Al N/Ga N高电子迁移率晶体管(HEMT),研究了Al Ga N背势垒结构对器件特性的影响。测试结果表明,有背势垒结构的器件最大饱和电流密度和峰值跨导要小于无背势垒结构器件,栅压偏置为+1 V时,无背势垒的Al N/Ga N HEMT器件最大饱和电流密度为1.02 A·mm-1,峰值跨导为304 m S·mm-1,有背势垒结构的器件饱和电流密度为0.75 A·mm-1,峰值跨导为252 m S·mm-1。有背势垒结构器件的亚阈值斜率为136 m V/dec,击穿电压为78 V;无背势垒结构器件的亚阈值斜率为150 m V/dec,击穿电压为64 V。栅长为0.25μm有背势垒结构的器件电流截止频率高于无背势垒结构器件,最高振荡频率要低于无背势垒结构的器件。展开更多
mm SiC films with high electrical uniformity a re grown on Si(111) by a newly developed vertical low-pressure chemical vapor dep osition (LPCVD) reactor.Both in-situ n- and p-type doping of 3C-SiC are achi eved by in...mm SiC films with high electrical uniformity a re grown on Si(111) by a newly developed vertical low-pressure chemical vapor dep osition (LPCVD) reactor.Both in-situ n- and p-type doping of 3C-SiC are achi eved by intentional introduction of ammonia and boron into the precursor gases.T he dependence of growth rate and surface morphology on the C/Si ratio and optimi zed growth conditions is obtained.The best electrical uniformity of 50mm 3C-SiC films obtained by non-contact sheet resistance measurement is ±2.58%.GaN fil ms are grown atop the as-grown 3C-SiC/Si(111) layers using molecular beam epit axy (MBE).The data of both X-ray diffraction and low temperature photoluminesc e nce of GaN/3C-SiC/Si(111) show that 3C-SiC is an appropriate substrate or buff er layer for the growth of Ⅲ-nitrides on Si substrates with no cracks.展开更多
Heteroepitaxial growth of 3C-SiC on patterned Si substrates by low pressure chemical vapor deposition （LPCVD） has been investigated to improve the crystal quality of 3C-SiC films. Si substrates were patterned with p...Heteroepitaxial growth of 3C-SiC on patterned Si substrates by low pressure chemical vapor deposition （LPCVD） has been investigated to improve the crystal quality of 3C-SiC films. Si substrates were patterned with parallel lines,1 to 10μm wide and spaced 1 to 10μm apart,which was carried out by photolithography and reactive ion etching. Growth behavior on the patterned substrates was systematically studied by scanning electron microscopy （SEM）. An airgap structure and a spherical shape were formed on the patterned Si substrates with different dimensions. The air gap formed after coalescence reduced the stress in the 3C-SiC films, solving the wafer warp and making it possible to grow thicker films. XRD patterns indicated that the films grown on the maskless patterned Si substrates were mainly composed of crystal planes with （111） orientation.展开更多
文摘采用行星热壁式SiC外延炉对100 mm 4°偏轴4H-SiC衬底外延工艺进行了研究。分析了氢气预刻蚀工艺对4°偏轴衬底外延材料表面形貌的影响。采用双指标正交实验,通过极差分析的方法研究了C/Si比、Cl/Si比、主氢流量、生长温度、三路气体比等工艺参数对SiC外延厚度和掺杂浓度均匀性指标影响的主次顺序,并给出了优化的外延参数。采用该工艺条件制得的无台阶聚集形貌的SiC外延片片内厚度均匀性和浓度均匀性分别是1.23%和3.32%。
文摘利用相同器件工艺在两种不同材料结构上制备了Al N/Ga N高电子迁移率晶体管(HEMT),研究了Al Ga N背势垒结构对器件特性的影响。测试结果表明,有背势垒结构的器件最大饱和电流密度和峰值跨导要小于无背势垒结构器件,栅压偏置为+1 V时,无背势垒的Al N/Ga N HEMT器件最大饱和电流密度为1.02 A·mm-1,峰值跨导为304 m S·mm-1,有背势垒结构的器件饱和电流密度为0.75 A·mm-1,峰值跨导为252 m S·mm-1。有背势垒结构器件的亚阈值斜率为136 m V/dec,击穿电压为78 V;无背势垒结构器件的亚阈值斜率为150 m V/dec,击穿电压为64 V。栅长为0.25μm有背势垒结构的器件电流截止频率高于无背势垒结构器件,最高振荡频率要低于无背势垒结构的器件。
文摘mm SiC films with high electrical uniformity a re grown on Si(111) by a newly developed vertical low-pressure chemical vapor dep osition (LPCVD) reactor.Both in-situ n- and p-type doping of 3C-SiC are achi eved by intentional introduction of ammonia and boron into the precursor gases.T he dependence of growth rate and surface morphology on the C/Si ratio and optimi zed growth conditions is obtained.The best electrical uniformity of 50mm 3C-SiC films obtained by non-contact sheet resistance measurement is ±2.58%.GaN fil ms are grown atop the as-grown 3C-SiC/Si(111) layers using molecular beam epit axy (MBE).The data of both X-ray diffraction and low temperature photoluminesc e nce of GaN/3C-SiC/Si(111) show that 3C-SiC is an appropriate substrate or buff er layer for the growth of Ⅲ-nitrides on Si substrates with no cracks.
文摘Heteroepitaxial growth of 3C-SiC on patterned Si substrates by low pressure chemical vapor deposition （LPCVD） has been investigated to improve the crystal quality of 3C-SiC films. Si substrates were patterned with parallel lines,1 to 10μm wide and spaced 1 to 10μm apart,which was carried out by photolithography and reactive ion etching. Growth behavior on the patterned substrates was systematically studied by scanning electron microscopy （SEM）. An airgap structure and a spherical shape were formed on the patterned Si substrates with different dimensions. The air gap formed after coalescence reduced the stress in the 3C-SiC films, solving the wafer warp and making it possible to grow thicker films. XRD patterns indicated that the films grown on the maskless patterned Si substrates were mainly composed of crystal planes with （111） orientation.
