Protective effects of L-arginine against ischemia-reperfusion injury in non-heart beating rat liver graft

BACKGROUND: Although the use of non-heart beating donors (NHBDs) could bridge the widening gap between organ demand and supply, its application to liver transplantation is limited due to the high incidence of primary graft loss. Prevention of liver injury in NHBDs will benefit the results of transplantation. This study was conducted to evaluate the protective effects of L-arginine on liver grafts from NHBDs. METHODS: One hundred and four Wistar rats were randomly divided into 7 groups: normal control (n=8) controls 1, 2 and 3 (C-1, C-2, C-3, n=16), and experimental 1, 2 and 3 (E-1, E-2, E-3, n=16). For groups C-1 and E-1, C-2 and E-2, and C-3 and E-3, the warm ischemia time was 0, 30, and 45 minutes, respectively. Liver grafts were flushed with and preserved in 4 degrees C Euro-collins solution containing 1 mmol/L L-arginine for 1 hour in each experimental group. Recipients of each experimental group were injected with L-arginine (10 mg/kg body weight) by tail vein 10 minutes before portal vein reperfusion. Donors and recipients of each experimental control group were treated with normal saline. Then transplantation was performed. At 1, 3, and 24 hours after portal vein reperfusion, blood samples were obtained to determine the levels of alanine aminotransferase (ALT), aspartate aminotransferase (AST), nitric oxide (NO) and plasma endothelin (ET). At 3 hours after portal vein reperfusion, grafts samples were fixed in 2.5% glutaraldehyde for electron microscopic observation. RESULTS: At I hour after portal vein reperfusion, the levels of NO in groups E-1, E-2, E-3 and C-1, C-2, C-3 were lower, while the levels of plasma ET, serum ALT and AST were higher than those in the normal control group (P<0.05). At 1, 3, and 24 hours, the levels of NO in groups E-1, E-2, E-3 were higher, while the levels of plasma ET, serum ALT and AST were lower than those in the corresponding control groups (C-1, C-2, C-3) (P<0.05). The levels of NO in groups C-2 and C-3 were lower than in group C-1 (P<0.05), and the level of NO in group C-3 was lower than in group C-2 (P<0.05). At 1, 3 and 24 hours, the levels of plasma ET, serum ALT, and AST in groups E-1, E-2, E-3 were lower than those in the corresponding control groups (C-1, C-2, C-3) (P<0.05). The levels of plasma ET, serum ALT, and AST were lower in group C-3 than in groups C-1 and C-2 (P<0.05). Pathological changes in groups E-1, E-2, E-3 were milder than those in the corresponding experimental control groups (C-1, C-2, C-3). CONCLUSIONS: The imbalance between NO and ET plays an important role in the development of ischemia-reperfusion injury of liver grafts from NHBDs. L-arginine can attenuate injury in liver grafts from NHBDs by improving the balance between NO and ET.

Work Hardening Behavior of 1020 Steel During Cold-Beating Simulation

The present research of cold-beating formation mainly focused on roller design and manufacture, kinematics, constitutive relation, metal flow law, thermo-mechanical coupling, surface micro-topography and microstructure evolution. However, the research on surface quality and performance of workpieces in the process of cold-beating is rare. Cold-beating simulation experiment of 1020 steel is conducted at room temperature and strain rates ranging from 2000 to 4000 s^-1 base on the law of plastic forming. According to the experimental data, the model of strain hardening of 1020 steel is established, Scanning Electron Microscopy（SEM） is conducted, the mechanism of the work hardening of 1020 steel is clarified by analyzing microstructure variation of 1020 steel. It is found that the strain rate hardening effect of 1020 steel is stronger than the softening effect induced by increasing temperatures, the process of simulation cold-beating cause the grain shape of 1020 steel significant change and microstructure elongate significantly to form a fibrous tis- sue parallel to the direction of deformation, the higher strain rate, the more obvious grain refinement and the more hardening effect. Additionally, the change law of the work hardening rate is investigated, the relationship between dislocation density and strain, the relationship between work hardening rate and dislocation density is obtained. Results show that the change trend of the work hardening rate of 1020 steel is divided into two stages, the work hardening rate decreases dramatically in the first stage and slowly decreases in the second stage, finally tending toward zero. Dislocation density increases with increasing strain and strain rate, work hardening rate decreases with increasing dislocation density. The research results provide the basis for solving the problem of improving the surface quality and performance of workpieces under cold-beating formation of 1020 steel.

Metal Flowing of Involute Spline Cold Roll-beating Forming

The present research on involute spline cold roll-beating forming is mainly about the principles and motion relations of cold roll-beating,the theory of roller design,and the stress and strain field analysis of cold roll-beating,etc.However,the research on law of metal flow in the forming process of involute spline cold roll-beating is rare.According to the principle of involute spline cold roll-beating,the contact model between the rollers and the spline shaft blank in the process of cold roll-beating forming is established,and the theoretical analysis of metal flow in the cold roll-beating deforming region is proceeded.A finite element model of the spline cold roll-beating process is established,the formation mechanism of the involute spline tooth profile in cold roll-beating forming process is studied,and the node flow tracks of the deformation area are analyzed.The experimental research on the metal flow of cold roll-beating spline is conducted,and the metallographic structure variation,grain characteristics and metal flow line of the different tooth profile area are analyzed.The experimental results show that the particle flow directions of the deformable bodies in cold roll-beating deformation area are determined by the minimum moving resistance.There are five types of metal flow rules of the deforming region in the process of cold roll-beating forming.The characteristics of involute spline cold roll-beating forming are given,and the forming mechanism of involute spline cold roll-beating is revealed.This paper researches the law of metal flow in the forming process of involute spline cold roll-beating,which provides theoretical supports for solving the tooth profile forming quality problem.

Relationship between Beating and Setting-on Place

In this paper,what causes the setting-on place of woven fabrics without adopting tension compensation is explained by means of experimental methods.Owing to that the main shaft speed and the beating speed of reed can not attain the normal values at setting-on,the warp tension and the beating force of the reed can neither reach the normal level.Therefore,the relative slippage movement of the weft against the warp during beating will be less,while the common movement of the weft together with the warp will be bigger than those at nor-mal running.As a result,the setting-on place is

A DIAGNOSTIC RESEARCH OF THE SEASONAL NORTHWARD BEATING OF THE SUBTROPICAL HIGH

Diagnostic techniques of CEOF, power spectrum and bandpass filter wave are applied in this paper to analyze the seasonal northward beating of the northern subtropical high using day to day geopotential fields of 2.5 ×2.5 at 500 hPa May through July in 1988 and 1991. It is concluded that it is globally observed that the subtropical high has northward beats that propagate westward; the source of beating mainly lies in the region of Arabian Sea and central Pacific and the sink in eastern Pacific; the seasonal beating is dominated by effects of the disturbance field; low frequency oscillation plays a key role in the beating and the westward propagation so that the difference in the latter in individual years is caused by the varying source of disturbance and the low frequency waves it excites.

Dynamic Formulations and Beating Phenomena of Rotating Euler-Bernoulli Flexible Shafts

In this paper, the intrinsic behavior of rotating Euler Benoulli flexible shafts was studied due to coupled bending and torsional vibrations. The equations of motion of the shaft with unbalanced eccentricity and viscous material damping were derived by the Hamilton principle. The numerical solution was obtained using the perturbation approach and mode assuming method. The influences of the coupled vibrations between the bending and torsion, the rotating speed, material damping and the slenderness ratio of the shaft were analyzed. It is clearly shown that the beating phenomena can occur when the interaction of torsion and flexure is considered.

An Experience on Normothermic Beating Heart Pulmonary Thromboendarterectomy

Objective: To study the outcome of normothermic beating heart pulmonary thromboendarterectomy (PTE) performed in patients with chronic pulmonary thromboembolism. Methodology: A retrospective analysis of 15 patients who underwent PTE under normothermic beating heart cardio-pulmonary bypass from July 2009 to September 2018 was done. The patients were followed up with clinical assessment, transthoracic echocardiography and computerized tomographicangiography (CTA) for 1 month to 82 months. Results: Data were analysed for 15 consecutive patients. Mean age of the patients was 35.28 years and 10 patients were male. Pre-operatively 6 (40%) patients presented with New York Heart Association (NYHA) class II dyspnoea on exertion symptomatology, 7 (47%) were in NHYA class III, and 2 (13%) were in NYHA class IV. The preoperative and postoperative mean pulmonary artery pressures (mPAP) (mmHg) were 36.50 ± 11.3 and 20.21 ± 7.19, the systolic PAPs (mmHg) were 73.35 ± 14.12 and 35.21 ± 7.89 and the diastolic PAPs (mmHg) were 19.28 ± 8.60 and 12.85 ± 7.26 respectively. 2 (13%) patients had Jamieson’s type I and 12 (87%) had Jamieson type II disease. One patient (7%) expired on 9th postoperative day. All the patients had improved pulmonary gas exchange and did not require oxygen supplementation from 5th postoperative day;symptoms improved to NYHA class I & II in 12 (80%) & 3 (20%) of patients respectively. There was no reperfusion pulmonary edema or any neurologic complications. Postoperative echocardiogram showed improved right ventricular function and Computerised Tomographic Angiogram showed completeness of the procedure. Conclusion: Pulmonary thromboendarterectomy under normothermic beating heart cardiopulmonary bypass has good immediate postoperative results with significant progressive improvement in hemodynamics and quality of life during the course of follow-up. The results were not only comparable to those of the procedure done under deep hypothermic circulatory arrest by other centres but also without its associated adverse events. This technique requires more expertise but gives equivalent good results in immediate and short- to mid-term follow-up with less morbidity than the standard procedure, but it requires long-term follow-up to substantiate the evidence.

Controllable beating signal using stored light pulse

We experimentally study the controllable generation of a beating signal using stored light pulses based on electromagnetically induced transparency(EIT) in a solid medium. The beating signal relies on an asymmetric procedure of light storage and retrieval. After storing the probe pulse into the spin coherence under the EIT condition, two-color control fields with opposite detunings instead of the initial control field are used to scatter the stored spin coherence. The controllable beating signal is generated due to alternative constructive and destructive interferences in the retrieved signal intensities. The beating of the two-color control fields is mapped into the beating of weak probe fields by using atomic spin coherence. This beating signal will be important in precise atomic spectroscopy and fast quantum limited measurements.

Design and Experiment of Non-circular Combined Gear Train Beating-up Mechanism

The most important performance of a beating-up mechanism is that the dwelling time of the sley must ensure the completion of the weft insertion. To meet this requirement, a new non-circular combined gear train beating-up mechanism which is composed of two-stage planetary gear trains is proposed. The first-stage is a Fourier planetary gear train and the second-stage is a non-circular planetary gear train. For designing of this new mechanism, the ideal kinematic equations of the sley are constructed first. Then the kinematic model of the first-stage Fourier planetary gear train is established and the reverse solution for the pitch curves of the second-stage non-circular gears is deduced. With a computer-aided design program, the influences of several important parameters on the pitch curves of the second-stage non-circular gears are analyzed, and a set of preferable structural parameters are obtained. Finally, a test bed of this mechanism is developed and the experimental results show that this new beating-up mechanism can achieve the designed dwelling time, namely it can meet the requirements of beating-up process.

Renal Outcomes and Myocardial Performance after On-Pump Beating Heart versus Conventional On-Pump Surgery in Patients with Preoperative Low Glomerular Filtration Rate

Objective: Acute kidney disease develops 16% - 30% of patients with preoperative impaired renal functions. Our aim of this study was to compare postoperative renal outcomes using two open heart surgery techniques, on-pump beating heart (OPBH) and conventional on-pump (COP), in patients who have preoperative low glomerular filtration rate (eGFR) as an indicator of creatinine clearance. Methods: From 2004 to 2015, 341 patients with preoperative creatinine clearance were lower than 90 ml/min/1.73m2 were selected for this study. On-Pump beating heart was performed in 111 patients (Group I). Conventional on-pump technique was used in 200 patients. In the remaining patients, we measured postoperative Tumor Necrosis Factor Alpha (TNF-alpha), cardiac troponin I (cTn-I), Brain natriuretic peptid (NT-Pro- BNP), creati-nine (Cr), blood urea nitrogen (BUN) and postoperative eGFR daily until day four after surgery. Results: There were no differences in baseline levels of TNF-alpha, NT-Pro-BNP, BUN, cTn-I, Cr levels between the groups. Cardiopulmonary bypass (CPB) time were much longer and cumulative inotrope use was significantly higher in patients underwent COP (P Conclusion: Our study showed that on-pump beating heart CABG technique provides a morbidity benefit and is associated with a lower risk of peroperative LOS in patients with mild renal disfunction. Our study results suggest that OPBH is superior to the COP in terms of postoperative renal injury and cardiac mediators.

基于N-BEATS的能源互联网短期负荷预测

短期负荷预测在能源互联网的规划中既占重要组成部分,又是能源系统可靠高效运行的基础。在能源互联网中能源的短期负荷预测精度问题是人们重点关注问题。N-BEATS的深度神经结构未使用时序特别组成成分,仅使用一种基于后向和前向残差链路以及非常深的全连接层堆栈的深度神经架构。该结构具有可解释性、适用于广泛的目标域、并且训练速度快等优点。实验使用N-BEATS模型对历史负荷数据进行训练,然后对未来负荷进行短期负荷预测,取得了较高的预测精度。测得平均绝对百分比误差(eMAPE)为1.26%,平均绝对误差(eMAE)为84.238 kW,决定系数(R^(2))为0.9955,实验结果表明采用该方法的预测精度高于传统的预测方法,如在eMAPE方面相比TCN降低了0.61%。

Correlation Analysis of Attitudinal Responses of Men and Women Toward Wife Beating by Husband in Rural and Urban Ethiopia

The Central Statistical Agency （CSA） of Ethiopia included some questions in its 2005 Demographic and Health Survey （DHS） questionnaire, asking for the opinion of men and women if wives beaten by husbands is justified if wives commit some mistakes while they are undertaking their day to day family responsibilities and other personal functions. The sample size was about 14,000 women in the reproductive and productive ages of 15-49 and about 6,000 men in the age brackets of 15-59. The reasons for wife beating by husbands are examined against some selected independent background variables of the sampled men and women respondents, while the dependent variables are the responses to questions of wife beating. With respect to the analytical model, the author decided to focus on some descriptive statistics, such as frequency distributions tables, proportions, comparative analysis, and application of chi-squares （Xz） techniques to examine the variations in the responses of women and men amongst the independent backgrounds.

Complete Coronary Revascularization with on Pump Beating Heart

Background Off-pump coronary artery bypass grafting (CABG) is becoming increasingly popular world - wide. But it is not always feasible. Current cardioplegic techniques do not consistently avoid myocardial ischemic damage. So we use on pump beating heart technique to supplement off-pump CABG. Methods Based on 860 off-pump CABG cases between Aug 1998 to Aug 2000. From Aug 1999 to Aug 2000, 46 CABG cases were performed with on pump beating heart technique at Mani-pal Hospital Heart Foundation, Bangalore, India. All surgeries were performed through a median sternotomy. Exposure techniques were tailored to individual vessels and cardiac regions and local immobilization was performed with octopus. Vascular control was achieved with occluders and shunts. Total cardiopulmonary bypass (CPB) was established before or during CABG and normolthemia was used. Results Among 46 on -pump beating heart CABG patients, 26 patients used CPB before or during OP - CABG because of unstable hemodynamics and electric instability , 7 had very deep intramyocardial left anterior descending arteries, 5 patients had poor LV function (LVEF < 30 % ), 8 patients had cardiomegaly. The average number of grafts was 3.5. No operative mortality. Three patients had postoperative myocardial infarction. Anesthetic time 4. 5±1. 2 hours, extubation time 10±2. 5 hours, blood lost 680±230 mL, blood requirement 540±150 mL, preoperative LVEF 50. 3±13 % , postoperative LVEF 64. 1±14 %, ICU stay 1. 5±0. 5 days, hospi- tal stay 9.2±1.8 days. Conclusion Complete coronary revascularization with on pump beating heart is a supplement for off - pump CABG when it is not feasible. It eliminates intraoperative globe myocardial ischemia and avoids transient myocardial injury during cardioplegic arrest and myocardial reperfusion.

MINIMALLY INVASIVE REVASCULARISATION ON THE BEATING HEART IN COMBINATION WTTH PTCA

With the experience of over 250 beating hear operations since Feb 1995 westarted minimally invasive revascularization of the LAD(MIDCAB).SinceFeb.1996 we operated upon 182 patients with this procedure Since June1996 we treated 40 patients with multivessel discase with a Hybridproccdurc(PTCA plus MIDCAB)The age of the patients ranged between 68 and 79 years.29 patients waremaic.28 patiens suffered from a double vessel discase.12 patients fromtriple vessel discase.The left ventricular ejeetion fraction was loss then 40%in 8 cases 2 patients underwent a reoperativc procedure.Further risk factorswere COLD(n=9).recent MI(n=6),renal insufliciency(n=13).Diabeiesinellitus(n-12).The left mammary was prepared in the usual manner.As access wechese a partial inferior sternotomy(n=4)or a lateral minithoracotomy(n=36).The anastomosis was performed on the beating heart.In all patients we conneeted the LIMA to the LAD.All patients survived andcould be discharged on the 6th postoperative day(mean).In two patients arevision due to bleeding became necessary.Two patients reccived a bloodtransfusions.Postoperatively 15 patients reccived a PTCA of the RCX.4 astentimplantation to the Rex.16 a PTCA of the RCA.5 a stentimplantationto the RCA and 3 patients a PTCA of a D1.3 patients developed a falscaneurysm after the cathcter intervention.By performing the nunimally invasive proeedure the trauma caused bycxtracorporeal circulation can be avoided.Through the combination withPTCA a less invasive therapy of coronary multivessel discase becomespossible in select patients.Postoperative complications and hospital stay canbe teduced.

ZTE to Unveil World Beating Solution-Rich NGN and Mobile Services at PT/Expo Comm China 2004

ZTE Corporation appeared at Expo Comm China2004 with a range of world-leading solutions andapplications stretching across the entiretechnology spectrum-from mobile and NGNrequirements to videoconferencing and

For retail Apps,beating the uninstall is the Holy Grail

More than any other time of the year,everyone is shopping and nobody wants to overpay because they missed out on a coupon or promo code.Customers have found the easiest way to save is by downloading a smartphone app.But after the transaction is completed...they hit the delete button.This dance doesn’t play out only during the holidays,though.Savvy consumers do this all year long-leaving brands and retailers to wonder how

OBSERVATION ON CURATIVE EFFECTS OF BEATING-ACUPUNCTURE ON 100 CASES OF CERVICAL SPONDYLOPATHY

Beating-acupuncture therapy is developed by Li Xutang, Director of the Section of TCM in the Jingdezhen Municipal First Hospital. Amng the 100 cases in the beating-acupuncture group, 85 cases were cured and 11 cases improved, the cure rate was 85 %; Of the 50 cases in the filiform needle acupuncture group, 25 cases were cured and 23 improved, the cure rate was 50 %. There was a statis-tically significant difference(P<0.01 ) between the two grdrips. It is indicated that the curative effect of beating-acupuncture on cervical spondylopathy is obviously superior to that of fili form-needle acupuncture, which provides a new therapy without traumatic pain for clinical treatment of cervical spondylopathy,

Isolated Tricuspid Valve Repair and Right Atrial Plication Performed Using a Beating-Heart Technique for Atrial Functional Tricuspid Valve Regurgitation

Background: Isolated tricuspid valve disease remains a controversial indication for surgical intervention. Many patients referred for surgery already have a poor clinical condition and an advanced New York Heart Association functional class. There is no consensus on the optimal surgical technique for this condition, including on whether to perform the procedure on a beating or an arrested heart and whether to perform valve repair or replacement. Methods: We analyzed four case series between 2015 and 2022 in which patients with secondary tricuspid regurgitation (TR) underwent valve repair on a beating heart and right atrial plication for a dilated right atrium. The TRI-SCORE was calculated for each patient. Results: All patients experienced a favorable postoperative course with significant improvements in heart failure symptoms. TR was markedly reduced;however, in one patient with concomitant mitral regurgitation (MR) and a high TRI-SCORE, MR worsened postoperatively. This patient later died from unknown causes due to multiple comorbidities in the late phase. Conclusions: Tricuspid valve repair on a beating heart was effective for improving the cardiac function, and the TRI-SCORE proved useful as a preoperative risk assessment tool. The underlying mechanism by which TR exacerbates MR requires further investigation.

基于N-BEATS的托辊滚动轴承剩余寿命预测

为减少煤矿井下带式输送机因托辊故障带来的安全事故和经济损失,提高工作人员和机组设备的安全性和运输效率,对于不同工况下不同位置托辊滚动轴承出现的异常振动情况,应用具有深层结构和残差网络的N-BEATS预测模型进行滚动轴承寿命预测。首先,分析时间序列预测模型N-BEATS的原理及结构,并根据N-BEATS原理建立适用于托辊滚动轴承的寿命预测模型;然后,以某矿带式输送机托辊实际运行工况为背景,搭建基于DVS技术的托辊滚动轴承振动信号监测平台,采集不同工况下的托辊轴承振动信号数据;最后,将采集到的托辊滚动轴承振动数据输入到基于时间序列预测模型(N-BEATS)、卷积神经网络(RCNN)、相似性预测模型中,与真实值进行对比,并评估3种托辊滚动轴承剩余寿命预测质量。结果表明:N-BEATS预测模型相对于RCNN和相似性预测模型,其平均绝对误差分别提升了5.3%和4.1%;N-BEATS预测模型相对均方根误差分别提升了6.3%和5.2%。

The kinematic Design of Beating-up Mechanism for Water-jet Loom Series Modified from Air-jet Loom

For Toyoda looms with air-jet weft insertion,the beat-ing-up mechanisms together with those of Tsudakomawater-jet looms are analyzed.Then by changing thecrank length of the four-bar-linkage for the air-jetlooms to get four specifications of reed travel correspond-ing to the series of Tsudakoma water-jet looms,it canbe proved by comparisons of displacements,velocities,accelerations and transmission pressure angles that thosetwo series of mechanisms have very similar kinematicproperties.So the possibility of developing a series of wa-ter-jet looms modified from Toyoda air-jet looms isproved.It is beneficial to save the machine cost andbroaden the machine types.