Energy Efficiency of a Simulated Synthetic Natural Gas Combined Cycle (SNGCC)

The objective of this investigation is to analyze the impact of the flue gas recirculation (FGR) ratio on the different energy inputs and outputs of a SNGCC power plant as well as its overall efficiency. Simulation results indicate that increasing flue gas recirculation increases the energy consumed by the recirculation compressor and the energy produced by the gas turbine. On the other hand, it decreases the production of energy of the steam turbine and the energy consumed by the pump of the steam cycle. The overall energy efficiency of the SNGCC power plant is highest (41.09%) at a value of 0.20 of the flue gas recirculation. However, the flue gas composition with a FGR ratio of 0.37 is more suitable for effective absorption of carbon dioxide by amine solutions. Based on the low heating value (LHV) of hydrogen, the corresponding overall efficiency of the power plant is 39.18% and the net power output of the plant is 1273 kW for consumption of 97.5 kg/hr. of hydrogen.

Simulation of a NGCC Power Generation Plant for the Production of Electricity from CO2 Emissions Part II: SNGCC Power Plant

The objective of the first part of the investigation was to use Aspen Plus software and the Redlich-Kwong-Soave equation of state in order to simulate an adiabatic methanation reactor for the production of synthetic natural methane (SNG) using 1 kg/hr of carbon dioxide. In this paper, we define the Synthetic Natural Gas Combined Cycle (SNGCC) as a combined cycle power plant where the fuel is synthetic natural gas (SNG) produced by a methanation reactor. The feed of the methanation reactor is the recycled stream of carbon dioxide of a CO2 capture unit treating the flue gas of the SNGCC power plant. The objective of the second part of the investigation is the utilization of Aspen plus software with SRK equation of state for the simulation of the SNGCC power plant. The metallurgical limitation of the gas turbine was fixed at 1300°C in this investigation. For effective absorption by amine solutions, the molar percentage of CO2 in the flue gas should be higher than 10%. Moreover, in order to reduce technical problems linked to oxidative degradation of amine in the CO2 capture plant, the percentage of O2 in the flue gas should also be lower than 5%. To reach this goal, the primary air for combustion has 10% excess air (compared to stoichiometric air) and 37% of the flue gas leaving the SNGCC is recirculated as the secondary air for cooling the turbine. As a result, the concentration of CO2 and O2 of the flue gas entering the CO2 capture unit were respectively equal to 10.2% and 2.01%. The simulation results of the SNGCC power plant indicate that 6.6 MJ of electricity are produced for each kg of carbon dioxide recycled from the CO2 capture unit of the power plant. In other terms, the production of the 24.88 kg/hr of synthetic natural gas (SNG) consumes 62.36 kg/hr of recycled carbon dioxide and 16.4 kg/hr of hydrogen. The SNG produced by the methanation reactor of the power plant generates 114 kW of electricity. It is assumed in this paper that the hydrogen needed for the methanation of carbon dioxide is a product of a catalytic reforming plant that produces gasoline from heavy naphta fraction of an atmospheric distillation unit of crude oil.