The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The pr...The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The proposed low-cost approach has been applied and validated by the implementation of an industrial regulator in a real time hardware-in-the-loop simulation of a mixed islanded power network including precise models of the hydraulic system. The studied network is constituted of three different types of electrical power generation systems and a consumer.展开更多
Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in orde...Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in order to reduce cost in the testing phase. Nowadays, real time PV simulators are obtained by using analog and/or digital components. In this paper, a real-time simulation of a PV system with a boost converter was proposed using only the digital signal processor （DSP） processor with two DC voltage sources to emulate the temperature and irradiation in the PV system. A MATLAB/ Simulink environment was used to develop the real-time PV system with a boost converter into a C-program and build it into a DSP controller TMS320F28335. Besides, the performance of the real-time DSP-based PV was tested in different temperature and irradiation conditions to observe the P-V and V-I characteristics. Further, the performance of the PV with a boost converter was tested at different temperatures and irradiations using MPPT algorithms. This scheme was tested through simulation and the results were validated with that of standard conditions given in the PV data sheets. Implementation of this project helped to attract more researchers to study renewable energy applications without real sources. This might facilitate the study of PV systems in a real-time scenario and the evaluation of what should be expected for PV modules available in the market.展开更多
文摘The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The proposed low-cost approach has been applied and validated by the implementation of an industrial regulator in a real time hardware-in-the-loop simulation of a mixed islanded power network including precise models of the hydraulic system. The studied network is constituted of three different types of electrical power generation systems and a consumer.
文摘Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in order to reduce cost in the testing phase. Nowadays, real time PV simulators are obtained by using analog and/or digital components. In this paper, a real-time simulation of a PV system with a boost converter was proposed using only the digital signal processor （DSP） processor with two DC voltage sources to emulate the temperature and irradiation in the PV system. A MATLAB/ Simulink environment was used to develop the real-time PV system with a boost converter into a C-program and build it into a DSP controller TMS320F28335. Besides, the performance of the real-time DSP-based PV was tested in different temperature and irradiation conditions to observe the P-V and V-I characteristics. Further, the performance of the PV with a boost converter was tested at different temperatures and irradiations using MPPT algorithms. This scheme was tested through simulation and the results were validated with that of standard conditions given in the PV data sheets. Implementation of this project helped to attract more researchers to study renewable energy applications without real sources. This might facilitate the study of PV systems in a real-time scenario and the evaluation of what should be expected for PV modules available in the market.
