Linear switch reluctance machine(LSRM)has been tried to act as an alternative generator for direct drive linear wave energy converter(WEC).Many researchers have proposed new topologies of LSRM to improve the power den...Linear switch reluctance machine(LSRM)has been tried to act as an alternative generator for direct drive linear wave energy converter(WEC).Many researchers have proposed new topologies of LSRM to improve the power density,efficiency and reliability.However,the control methods for LSRM applied in direct drive WEC have been paid little attention,especially control methods considering the wave energy generator operating characteristics.In this paper,according to the generator control requirements of the direct drive WEC,force control algorithm for LSRM operating in four quadrants without a speed closed loop is put forward.The force ripple of LSRM is suppressed using force sharing function method.The four-quadrant control is easy to realize requiring only phase currents information.Simulation results validate the proposed method and indicate that LSRM is able to be used as the generator for direct drive WEC.展开更多
The aim of this paper is to analyze the potential of switched reluctance generator (SRG) in wind energy application. The machine comprises of switched reluctance generator, power converter and controller. In this pape...The aim of this paper is to analyze the potential of switched reluctance generator (SRG) in wind energy application. The machine comprises of switched reluctance generator, power converter and controller. In this paper the main ele-ments that form the generator system is discussed. It also highlights the common type of converter and structure used for SRG in wind energy application and types of control strategy available. Using power converter for switching the generator can operate over a wide speed range. Its applications in high speed area such as starter/generator for air-craft and gas turbine has been established, however the low/medium speed operation is still at an early stage of re-search. In order to subject the machine to various parameters, offline modeling is being investigated to produce the best optimum design.展开更多
This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly describe...This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly described. The output power of the SRG is controlled so that it can track the maximum output power of a wind turbine drive applications. Also, the output generator voltage is stabilized under either load or wind speed variations. Basic operational characteristics of a three-phase 6/4 SRG are developed through experimental observation. Meanwhile, the real-time operation was implemented in a DSP （digital signal processor） environment. The simulation of the complete system model has been obtained using the Matlab/Simulink software. A good agreement between experimental and simulation results has been observed which supports the validity of the proposed analysis.展开更多
基金This work was supported in part by the National Natural Science Foundation of China under Grant U1806224,61733010in part by the Guangdong Key Research and Development Program under Grant 2019B090917001.
文摘Linear switch reluctance machine(LSRM)has been tried to act as an alternative generator for direct drive linear wave energy converter(WEC).Many researchers have proposed new topologies of LSRM to improve the power density,efficiency and reliability.However,the control methods for LSRM applied in direct drive WEC have been paid little attention,especially control methods considering the wave energy generator operating characteristics.In this paper,according to the generator control requirements of the direct drive WEC,force control algorithm for LSRM operating in four quadrants without a speed closed loop is put forward.The force ripple of LSRM is suppressed using force sharing function method.The four-quadrant control is easy to realize requiring only phase currents information.Simulation results validate the proposed method and indicate that LSRM is able to be used as the generator for direct drive WEC.
文摘The aim of this paper is to analyze the potential of switched reluctance generator (SRG) in wind energy application. The machine comprises of switched reluctance generator, power converter and controller. In this paper the main ele-ments that form the generator system is discussed. It also highlights the common type of converter and structure used for SRG in wind energy application and types of control strategy available. Using power converter for switching the generator can operate over a wide speed range. Its applications in high speed area such as starter/generator for air-craft and gas turbine has been established, however the low/medium speed operation is still at an early stage of re-search. In order to subject the machine to various parameters, offline modeling is being investigated to produce the best optimum design.
文摘This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly described. The output power of the SRG is controlled so that it can track the maximum output power of a wind turbine drive applications. Also, the output generator voltage is stabilized under either load or wind speed variations. Basic operational characteristics of a three-phase 6/4 SRG are developed through experimental observation. Meanwhile, the real-time operation was implemented in a DSP （digital signal processor） environment. The simulation of the complete system model has been obtained using the Matlab/Simulink software. A good agreement between experimental and simulation results has been observed which supports the validity of the proposed analysis.
