In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision sca...In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision scanning platform is designed to achieve fast servo through moving probe and sample simultaneously,and several combined nanopositioning stages are used to guarantee linearity and orthogonality of displacement.To eliminate the signal deviation caused by AFM-head movement,a traceable optical lever system is designed for cantilever deformation detection.In addition,a method of tailoring the cantilever of commercial probe with flared tip is proposed to reduce the lateral force applied on the tip in measurement.The tailored probe is mounted on the 3D-AFM,and 3D imaging experiments are conducted on different samples by use of adaptive-angle scanning strategy.The results show the roob-mean-square value of the vertical displacement noise(RMS)of the prototype is less than 0.1 nm and the high/width measurement repeatability(peak-to-peak)is less than 2.5 nm.展开更多
We review the recent biomedical detection developments of scanning near-field optical microscopy(SNOM),focusing on scattering-type SNOM,atomic force microscope-based infrared spectroscopy,peak force infrared microscop...We review the recent biomedical detection developments of scanning near-field optical microscopy(SNOM),focusing on scattering-type SNOM,atomic force microscope-based infrared spectroscopy,peak force infrared microscopy,and photo-induced force microscopy,which have the advantages of label-free,noninvasive,and specific spectral recognition.Considering the high water content of biological samples and the strong absorption of water by infrared waves,we divide the relevant research on these techniques into two categories:one based on a nonliquid environment and the other based on a liquid environment.In the nonliquid environment,the chemical composition and structural information of biomedical samples can be obtained with nanometer resolution.In the liquid environment,these techniques can be used to monitor the dynamic chemical reaction process and track the process of chemical composition and structural change of single molecules,which is conducive to exploring the development mechanism of physiological processes.We elaborate their experimental challenges,technical means,and actual cases for three microbiomedical samples(including biomacromolecules,cells,and tissues).We also discuss the prospects and challenges for their development.Our work lays a foundation for the rational design and efficient use of near-field optical microscopy to explore the characteristics of microscopic biology.展开更多
The localized micro-galvanic corrosion process and the kinetic information of Mg-(7,9)Al-1Fe-x Nd alloys were investigated by in situ observation under electrochemical control and in situ atomic force microscopy(AFM)i...The localized micro-galvanic corrosion process and the kinetic information of Mg-(7,9)Al-1Fe-x Nd alloys were investigated by in situ observation under electrochemical control and in situ atomic force microscopy(AFM)in an electrolyte environment.The results revealed that the formation of the Nd-rich phase in alloys resulted in a decrease in the Volta potential difference from~400 m V(AlFe3/α-Mg)to~220 mV(Nd-rich/α-Mg),reducing the corrosion products around the cathodic phase and corrosion current density of the microscale area.The addition of Nd significantly improved the corrosion resistance,mainly due to the suppression of the micro-galvanic corrosion between the second phases and substrate.Finally,the corrosion mechanism of Mg-(7,9)Al-1Fe-x Nd alloys was discussed based on in situ observations and electrochemical results.展开更多
基金National Key Research and Development Pragram of China(No.2016YFF0200602)National Natural Science Foundation of China(No.61973233)。
文摘In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision scanning platform is designed to achieve fast servo through moving probe and sample simultaneously,and several combined nanopositioning stages are used to guarantee linearity and orthogonality of displacement.To eliminate the signal deviation caused by AFM-head movement,a traceable optical lever system is designed for cantilever deformation detection.In addition,a method of tailoring the cantilever of commercial probe with flared tip is proposed to reduce the lateral force applied on the tip in measurement.The tailored probe is mounted on the 3D-AFM,and 3D imaging experiments are conducted on different samples by use of adaptive-angle scanning strategy.The results show the roob-mean-square value of the vertical displacement noise(RMS)of the prototype is less than 0.1 nm and the high/width measurement repeatability(peak-to-peak)is less than 2.5 nm.
基金supported by the National Key Research and Development Program(Grant No.2022YFA1404004)the Key Domestic Scientific and Technological Cooperation Projects in Shanghai(Grant No.21015800200).
文摘We review the recent biomedical detection developments of scanning near-field optical microscopy(SNOM),focusing on scattering-type SNOM,atomic force microscope-based infrared spectroscopy,peak force infrared microscopy,and photo-induced force microscopy,which have the advantages of label-free,noninvasive,and specific spectral recognition.Considering the high water content of biological samples and the strong absorption of water by infrared waves,we divide the relevant research on these techniques into two categories:one based on a nonliquid environment and the other based on a liquid environment.In the nonliquid environment,the chemical composition and structural information of biomedical samples can be obtained with nanometer resolution.In the liquid environment,these techniques can be used to monitor the dynamic chemical reaction process and track the process of chemical composition and structural change of single molecules,which is conducive to exploring the development mechanism of physiological processes.We elaborate their experimental challenges,technical means,and actual cases for three microbiomedical samples(including biomacromolecules,cells,and tissues).We also discuss the prospects and challenges for their development.Our work lays a foundation for the rational design and efficient use of near-field optical microscopy to explore the characteristics of microscopic biology.
基金financial support from the National Natural Science Foundation of China(No.51961026)。
文摘The localized micro-galvanic corrosion process and the kinetic information of Mg-(7,9)Al-1Fe-x Nd alloys were investigated by in situ observation under electrochemical control and in situ atomic force microscopy(AFM)in an electrolyte environment.The results revealed that the formation of the Nd-rich phase in alloys resulted in a decrease in the Volta potential difference from~400 m V(AlFe3/α-Mg)to~220 mV(Nd-rich/α-Mg),reducing the corrosion products around the cathodic phase and corrosion current density of the microscale area.The addition of Nd significantly improved the corrosion resistance,mainly due to the suppression of the micro-galvanic corrosion between the second phases and substrate.Finally,the corrosion mechanism of Mg-(7,9)Al-1Fe-x Nd alloys was discussed based on in situ observations and electrochemical results.
