Synthetic aperture radar imaging based on attributed scatter model using sparse recovery techniques

The sparse recovery algorithms formulate synthetic aperture radar(SAR) imaging problem in terms of sparse representation(SR) of a small number of strong scatters' positions among a much large number of potential scatters' positions,and provide an effective approach to improve the SAR image resolution.Based on the attributed scatter center model,several experiments were performed with different practical considerations to evaluate the performance of five representative SR techniques,namely,sparse Bayesian learning(SBL),fast Bayesian matching pursuit(FBMP),smoothed l0 norm method(SL0),sparse reconstruction by separable approximation(SpaRSA),fast iterative shrinkage-thresholding algorithm(FISTA),and the parameter settings in five SR algorithms were discussed.In different situations,the performances of these algorithms were also discussed.Through the comparison of MSE and failure rate in each algorithm simulation,FBMP and SpaRSA are found suitable for dealing with problems in the SAR imaging based on attributed scattering center model.Although the SBL is time-consuming,it always get better performance when related to failure rate and high SNR.

A 3D Geometry-Based Scattering Model for Vehicleto-Vehicle Wideband MIMO Relay-Based Cooperative Channels

In this paper, a three-dimensional(3D) geometry- based stochastic scattering model(GBSSM) for wideband multi-input multi-output(MIMO) vehicle-to-vehicle(V2V) relay-based cooperative fading channel based on geometrical three-cylinder is proposed. Non-line-of-sight(NLOS) propagation condition is assumed in amplify-and-forward(AF) cooperative networks from the source mobile station(S) to the destination mobile station(D) via the mobile relay station(R). We extend the proposed narrowband model to wideband and also introduce the carrier frequency and bandwidth into the model. To avoid complicated procedure in deriving the analytical expressions of the channel parameters and functions, the channel is realized first. By using the realized channel matrix, the channel properties are further investigated.

Hybrid micromotion-scattering center model for synthetic aperture radar micromotion target imaging

Micromotion is an important target feature, although the target micromotion has an unfavorable influence on the synthetic aperture radar （SAR） image interpretation due to defocusing. This paper introduces micromotion parameters into the scattering center model to obtain a hybrid micromotion-scattering center model, and then proposes an optimization algorithm based on the maximal likelihood estimation to solve the model for jointly obtaining target motion and scattering parameters. Initial value estimation methods using targets＇ ghost images are then presented to guarantee the global and fast convergence. Simulation results show the effectiveness of the proposed algorithm especially in high precision estimation and multiple targets processing.

Generative adversarial network-based atmospheric scattering model for image dehazing

This paper presents a trainable Generative Adversarial Network(GAN)-based end-to-end system for image dehazing,which is named the DehazeGAN.DehazeGAN can be used for edge computing-based applications,such as roadside monitoring.It adopts two networks:one is generator(G),and the other is discriminator(D).The G adopts the U-Net architecture,whose layers are particularly designed to incorporate the atmospheric scattering model of image dehazing.By using a reformulated atmospheric scattering model,the weights of the generator network are initialized by the coarse transmission map,and the biases are adaptively adjusted by using the previous round's trained weights.Since the details may be blurry after the fog is removed,the contrast loss is added to enhance the visibility actively.Aside from the typical GAN adversarial loss,the pixel-wise Mean Square Error(MSE)loss,the contrast loss and the dark channel loss are introduced into the generator loss function.Extensive experiments on benchmark images,the results of which are compared with those of several state-of-the-art methods,demonstrate that the proposed DehazeGAN performs better and is more effective.

Calculating the shading reduction coefficient of photovoltaic system efficiency using the anisotropic sky scattering model

The front-row shading reduction coefficient is a key parameter used to calculate the system efficiency of a photovoltaic(PV)power station.Based on the Hay anisotropic sky scattering model,the variation rule of solar radiation intensity on the surface of the PV array during the shaded period is simulated,combined with the voltage-current characteristics of the PV modules,and the shadow occlusion operating mode of the PV array is modeled.A method for calculating the loss coefficient of front shadow occlusion based on the division of the PV cell string unit and Hay anisotropic sky scattering model is proposed.This algorithm can accurately evaluate the degree of influence of the PV array layout,wiring mode,array spacing,PV module specifications,and solar radiation on PV power station system efficiency.It provides a basis for optimizing the PV array layout,reducing system loss,and improving PV system efficiency.

Generalized 3D Scattering Channel Model with MIMO Antenna Systems

In this paper, a generalized three-dimensional(3D) scattering channel model for macrocellular land mobile environments is considered. This model simultaneously describes angular arrival of multi-path signals in the azimuth and elevation planes in an environment where uniformly distributed scatterers are assumed to be present in hemispheroids around the base station(BS) and mobile station(MS). Using this channel model, we first derive the closed-form expression for the joint and marginal probability density functions of the angle-of-arrival and time-of-arrival measured at the BS and the MS corresponding to the azimuth and elevation angles. Next, we derive an expression for the Doppler spectral distribution caused by motion of the MSs. Furthermore, we analyze the performance of multiple-input multiple-output antenna systems numerically. The results show that the proposed 3D scattering channel model performs better than previously proposed two-dimensional(2D) models for indoor and outdoor environments. We compare the results with previous scattering channel models and measurement results to validate the generalizability of our model.

Theoretical Models of Light Scattering Applied in Sizing Particles in Coal Water Slurry

Advantges and disadvantage of Mie scattering model and Fraunhofer diffraction model are discussed. The result shows that 1) the Fraunhofer diffraction model is simple in design and fast in operation, which is quite suitable for on-line control and 2) the intensity and energy distribution of diffracted light of both the Mie scattering model and the Fraunhofer theoretical model are compared and researched. Feasibility of using the Fraunhofer diffraction model to replace the Mie scattering model in measuring particles in coal water slurry is demonstrated.

Node scattering manipulation based on trajectory model in wireless sensor network

To deploy sensor nodes over the area of interest,a scheme,named node scattering manipulation,was proposed.It adopted the following method:during node scattering,the initial states of every node,including the velocity and direction,were manipulated so that it would land in a region with a certain probability;every sensor was relocated in order to improve the coverage and connectivity.Simultaneously,to easily analyze the process of scattering sensors,a trajectory model was also proposed.Integrating node scattering manipulation with trajectory model,the node deployment in wireless sensor network was thoroughly renovated,that is,this scheme can scatter sensors.In practice,the scheme was operable compared with the previous achievements.The simulation results demonstrate the superiority and feasibility of the scheme,and also show that the energy consumption for sensors relocation is reduced.

Propagation modeling of ocean-scattered low-elevation GPS signals for maritime tropospheric duct inversion

The maritime tropospheric duct is a low-altitude anomalous refractivity structure over the ocean surface,and it can significantly affect the performance of many shore-based/shipboard radar and communication systems.We propose the idea that maritime tropospheric ducts can be retrieved from ocean forward-scattered low-elevation global positioning system（GPS） signals.Retrieval is accomplished by matching the measured power patterns of the signals to those predicted by the forward propagation model as a function of the modified refractivity profile.On the basis of a parabolic equation method and bistatic radar equation,we develop such a forward model for computing the trapped propagation characteristics of an ocean forward-scattered GPS signal within a tropospheric duct.A new GPS scattering initial field is defined for this model to start the propagation modeling.A preliminary test on the performance of this model is conducted using measured data obtained from a 2009-experiment in the South China Sea.Results demonstrate that this model can predict GPS propagation characteristics within maritime tropospheric ducts and serve as a forward model for duct inversion.

Scattering of scalar light wave from a Gaussian—Schell model medium

The scattering of scalar light wave from a random medium with a correlation function of Gaussian-Schell model distribution is studied. It is shown that the properties of the scattered field, i.e., the spectral density and the spectral degree of coherence of the scattered field, are closely related to the properties of the scattering medium, including the scaled effective radius and the scaled correlation length of the correlation function.

Scattering center modeling for low-detectable targets

The scattering centers(SCs)of low-detectable targets(LDTs)have a low scattering intensity.It is difficult to build the SC model of an LDT using the existing methods because these methods mainly concern dominant SCs with strong scattering contributions.This paper presents an SC modeling approach to acquire the weak SCs of LDTs.We employ the induced currents at the LDT to search SCs,and the joint time-frequency transform together with the Hough transform to separate the scattering contributions of different SCs.Particle swarm optimization(PSO)is applied to improve the estimation results of SCs.The accuracy of the SC model built by this approach is verified by a full-wave numerical method.The validation results show that the SC model of the LDT can precisely simulate the signatures of high-resolution images,such as high-resolution range profile and inverse synthetic aperture radar(ISAR)images.

Physical model of acoustic forward scattering by cylindrical shell and its experimental validation

Research on the underwater target scattering can provide important theoretical support for target detection. The scattering model of cylindrical shell is established in this paper. It is found that the forward target strength is much stronger and varies with angles of incident wave less significantly than backward target strength. The received forward signal strength fluctuates with the target moving due to the interference between direct signal and scattering signal, which is most significant when the target approaches the baseline. An experiment is carried out in an anechoic tank to validate the scattering model. The method of acquisiting forward scattering in the tank is proposed. The forward and the backward target strengths are achieved by using the pulse compression technology, and they axe about 3dB less than the modeling results. The forward scattering phenomena of quiescent and moving targets are measured, which are similar to modeling results with different target types.

A novel synthetic aperture radar scattering model for sea surface with breaking waves

In this study a novel synthetic aperture radar(SAR)scattering model for sea surface with breaking waves is proposed.Compared with existing models,the proposed model considers an empirical relationship between wind speed and wave breaking scattering to present the contribution of wave breaking.Moreover,the scattering weight factor p,and wave breaking rate q,are performed to present the contribution of the quasi-specular scattering term,Bragg scattering term,and wave breaking scattering term to the total scattering from the sea surface.To explore the modeling accuracy of sea-surface scattering,a simulated normalized radar cross-section(NRCS)and measured NRCS are compared.The proposed model generated the simulated NRCS and a matching GF-3 dataset was used for the measured NRCS.It was revealed that the performance of the VV polarization of our model was much better than that of HH polarization,with a correlation of 0.91,bias of-0.14 dB,root mean square error(RMSE)of 1.26 dB,and scattering index(SI)of-0.11.In addition,the novel model is explored and compared with the geophysical model of CMODs and satellite-measured NRCS from GF-3 SAR wave mode imagery.For an incidence angle 40°–41°,the relationship between the NRCS and wind speed,relative wind direction is proposed.As with the SAR-measured NRCS,the performance of VV polarization was much better than HH polarization,with a correlation of 0.99,bias of-0.25 dB,RMSE of 0.64 dB,and SI of-0.04.

Time-domain compressive dictionary of attributed scattering center model for sparse representation

Parameter estimation of the attributed scattering center(ASC) model is significant for automatic target recognition(ATR). Sparse representation based parameter estimation methods have developed rapidly. Construction of the separable dictionary is a key issue for sparse representation technology. A compressive time-domain dictionary(TD) for ASC model is presented. Two-dimensional frequency domain responses of the ASC are produced and transformed into the time domain. Then these time domain responses are cutoff and stacked into vectors. These vectored time-domain responses are amalgamated to form the TD. Compared with the traditional frequency-domain dictionary(FD), the TD is a matrix that is quite spare and can markedly reduce the data size of the dictionary. Based on the basic TD construction method, we present four extended TD construction methods, which are available for different applications. In the experiments, the performance of the TD, including the basic model and the extended models, has been firstly analyzed in comparison with the FD. Secondly, an example of parameter estimation from SAR synthetic aperture radar(SAR) measurements of a target collected in an anechoic room is exhibited. Finally, a sparse image reconstruction example is from two apart apertures. Experimental results demonstrate the effectiveness and efficiency of the proposed TD.

Structural modeling of proteins by integrating small-angle x-ray scattering data

Elucidating the structure of large biomolecules such as multi-domain proteins or protein complexes is challenging due to their high flexibility in solution. Recently, an ＂integrative structural biology＂ approach has been proposed, which aims to determine the protein structure and characterize protein flexibility by combining complementary high- and lowresolution experimental data using computer simulations. Small-angle x-ray scattering（SAXS） is an efficient technique that can yield low-resolution structural information, including protein size and shape. Here, we review computational methods that integrate SAXS with other experimental datasets for structural modeling. Finally, we provide a case study of determination of the structure of a protein complex formed between the tandem SH3 domains in c-Cb1-associated protein and the proline-rich loop in human vinculin.

Small-Angle X-Ray Scattering of Amorphous Germanium: Numerical Modeling

The present work deals with a detailed analysis of the small-angle X-ray scattering of nanoporous atomistic models for amorphous germanium. Structures with spherical nanovoids, others with arbitrarily oriented ellipsoidal ones, with monodisperse and polydisperse size distributions, were first generated. After relaxing the as-generated structure, we compute its radial distribution function, and then we deduce by the Fourier transform technique its X-ray scattering pattern. Using a smoothing procedure, the computed small-angle X-ray scattering patterns are corrected for the termination errors due to the finite size of the model, allowing so, for the first time at our best knowledge, a rigorous quantitative analysis of this scattering. The Guinier’s law is found to be valid irrespective of size and shape of the nanovoids over a scattering vector-range extending beyond the expected limit. A weighted combination of the Guinier’s forms accounts for well the nanovoid size distribution in the amorphous structure. The invariance of the Q-factor and its relationship to the void volume fraction are also confirmed. Our findings support then the quantitative analyses of available small-angle X-ray scattering data for amorphous germanium.

Finite element modeling of acoustic scattering from an encapsulated microbubble near rigid boundary

This article proposes a finite element model （FEM） for predicting the acoustic scattering from an encapsulated microbubble near rigid boundary. The validity of the model is first examined by comparing the acoustic nonlinear response of a free microbubble with that obtained by the Church model. Then this model is used to investigate the effect of the rigid boundary on acoustic scattering signals from microbubble. The results indicate that the resonance frequency decreases while the oscillation amplitude increases as the microbubble approaches the rigid boundary. In addition, the fundamental component of the acoustic scattering signal is enhanced compared with that of the free microbubble.

An angular cutoff composite model for investigation on electromagnetic scattering from two-dimensional rough sea surfaces

Based on the local configuration angle division to select the corresponding method for electromagnetic scattering calculation from rough sea surface, this paper presents an angular cutoff composite model： when the local scattered angle is in the specular region that is given by an approximately 20 degrees cone around the specular direction, the Kirchhoff approximation is applied to evaluate the specular reflection, which dominates the total scattering in this region; the small perturbation method is employed to handle the diffuse reflection which is predominant as the local scattered angle is situated out of the specular region. Numerical results are compared with those of experimental and theoretical models in several configurations as a function of incident angle, wind speed, wind direction. The comparison of numerical results of other experimental and theoretical models in several configurations shows that the new composite model is robust to give accurate numerical evaluations for the sea surface scattering.

Application of a multiregion model to the EM scattering from a rough surface with or without a target above it

An efficient multiregion model is introduced to calculate the electromagnetic scattering from a perfectly electrical conducting （PEC） rough surface with or without a PEC target above it. In the multiregion model, the rough surface is split into multiple regions depending on their position along the rough surface. Two intermediate regions are chosen as the dominant region. If a target is located above the rough surface, the target will also be included in the dominant region. The method of moments （MOM） is only adopted on the dominant region to ensure validity. Hence, the new model can greatly reduce the number of unknowns associated with full MOM analysis. The induced electric currents on the other regions are obtained by approximately considering the mutual coupling between different regions along the rough surface. Compared with the published hybrid method, this new model is not only suitable for EM scattering from a target above a rough surface but also applicable for just rough surfaces. Several numerical simulations are presented to show the validity and efficiency of the multiregion model.

Geometric Feature Extraction and Model Reconstruction Based on Scattered Data

A method of 3D model reconstruction based on scattered point data in reverse engineering is presented here. The topological relationship of scattered points was established firstly, then the data set was triangulated to reconstruct the mesh surface model. The curvatures of cloud data were calculated based on the mesh surface, and the point data were segmented by edge-based method; Every patch of data was fitted by quadric surface of freeform surface, and the type of quadric surface was decided by parameters automatically, at last the whole CAD model was created. An example of mouse model was employed to confirm the effect of the algorithm.