Monitoring subsidence rates along road network by persistent scatterer SAR interferometry with high-resolution TerraSAR-X imagery

Ground subsidence is one of the key factors damaging transportation facilities, e.g., road networks consisting of highways and railways. In this paper, we propose to apply the persistent scatterer synthetic aperture radar interferometry （PS-InSAR） approach that uses high- resolution TerraSAR-X （TSX） imagery to extract the regional scale subsidence rates （i.e., average annual sub- sidence in mm/year） along road networks. The primary procedures involve interferometric pair selection, interfer- ogram generation, persistent scatterer （PS） detection, PS networking, phase parameterization, and subsidence rate estimation. The Xiqing District in southwest Tianjin （China） is selected as the study area. This district contains one railway line and several highway lines. A total of 15 TSX images covering this area between April 2009 and June 2010 are utilized to obtain the subsidence rates by using the PS-InSAR （PSI） approach. The subsidence rates derived from PSI range from -68.7 to -1.3 mm/year. These findings show a significantly uneven subsidence pattern along the road network. Comparison between the PSI-derived subsidence rates and the leveling data obtained along the highways shows that the mean and standard deviation （SD） of the discrepancies between the two types of subsidence rates are 0.1 and 4-3.2 mm/year, respectively. The results indicate that the high-resolution TSX PSI is capable of providing comprehensive and detailed subsidence information regarding road networks with millimeter-level accuracy. Further inspections under geo- logical conditions and land-use categories in the study area indicate that the observed subsidence is highly related to aquifer compression due to groundwater pumping. Therefore, measures should be taken to mitigate groundwater extraction for the study area.

Simulation analysis of evolution of hot-images induced by coplanar multi-scatterers

Based on the diffraction theory model for hot-image formation, the evolution of hot-images induced by multiscatterers located in the same plane perpendicular to the propagation axis is numerically simulated. The simulation results show that hot-images induced by coplanar multi-scatterers are also coplanar no matter whether they exist simultaneously or severally. However, if they exist simultaneously the peak intensity of the primary hot-images is weaker than if they exist severally. The unequal competition for energy between the scattered beams from the scatterers leads to the fact that part of the corresponding hot-images are relatively enhanced and the others are restrained. The results show that the hot-images of certain scatterers become stronger when any of these parameters, i.e. amplitude modulation coefficient, phase modulation coefficient and size of the surrounding scatterer, decrease.

Effects of core position of locally resonant scatterers on low-frequency acoustic absorption in viscoelastic panel

Locally resonant sonic materials, due to their ability to control the propagation of low-frequency elastic waves, have become a promising option for underwater sound absorption materials. In this paper, the finite element method is used to investigate the absorption characteristics of a viscoelastic panel periodically embedded with a type of infinite-long noncoaxially cylindrical locally resonant scatterers(LRSs). The effect of the core position in the coating layer of the LRS on the low-frequency(500 Hz–3000 Hz) sound absorption property is investigated. With increasing the longitudinal core eccentricity e, there occur few changes in the absorptance at the frequencies below 1500 Hz, however, the absorptance above 1500 Hz becomes gradually better and the valid absorption(with absorptance above 0.8) frequency band(VAFB)of the viscoelastic panel becomes accordingly broader. The absorption mechanism is revealed by using the displacement field maps of the viscoelastic panel and the steel slab. The results show two typical resonance modes. One is the overall resonance mode(ORM) caused by steel backing, and the other is the core resonance mode(CRM) caused by LRS. The absorptance of the viscoelastic panel by ORM is induced mainly by the vibration of the steel slab and affected little by core position. On the contrary, with increasing the core eccentricity, the CRM shifts toward high frequency band and decouples with the ORM, leading to two separate absorption peaks and the broadened VAFB of the panel.

Numerical study of radio wave propagation in clear air acoustic scatterer

This paper numerically investigates the radio wave scattering by the artificial acoustic disturbance in the atmospheric boundary layer. The numerical model is based on the finitedifference time-domain（FDTD） method for radio wave propagation and fluid simulation for atmospheric disturbance by acoustics waves. The characteristics of radio wave scattering propagation in the artificial acoustic perturbations are investigated by this numerical model. The numerical simulation results demonstrate that the radio wave propagation scattered by acoustic scatterer has the characteristic of forward tropospheric scatter. When the radio waves are scattered, they distribute in all directions; a majority of radio waves continues to propagate along the original direction, and only a small part of the energy is scattered. For the same acoustic scatterer, if we merely change the radio wave emission elevation, the horizontal spans of forward scattering radio wave packets centers gradually decrease with the increasing of emission elevations; and the energy of wave packets increases firstly and then decreases with launching elevation, reaching the maximum at a certain angle. If we merely change the wave emitting position, the horizontal spans decrease with the increasing of emission positions, and the energy of wave packets also increases firstly and then decreases with launch position, reaching the maximum at a certain position. This approach can be very promising for atmospheric scatter communications.

INELASTIC MULTIPLE SCATTERING BY ACTIVE RANDOMLY DISTRIBUTED SPHERICAL SCATTERERS

According to the model of equivalent dipoles for active molecules, the analysisof inelastic EM scattering by active molecules embedded in a sphere is given by the method ofdyadic Green’s functions at the first, and then based on the theory of elastic multiple scattering byrandomly distributed spherical scatterers, a new theory for analysis of inelastic multiple scatteringby active molecules embedded in randomly distributed spherical scatterers also is developed. Thistheory gives the expansions of the multiple scattering fields in all space region in terms of vectorspherical wave functions in which the expansion coefficients can be solved from a set of coupledlinear equations.

USE OF FINITE-DIFFERENCE TIME-DOMAIN METHOD FOR CALCULATING EM ABSORPTION IN LOSSY DIELECTRIC SCATTERER

The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.

Elastic Multiple Scattering By Randomly Distributed Spherical Scatterers

Starting from the basic integral equation for multiple scattered fields,a set of coupledlinear equations for the expansion coefficients of elastic multiple scattered fields by randomlydistributed spherical scatterers has been derived by using the expansions of the fields and thetranslational addition theorems of vector spherical wave functions.Thus,a new theory for thiskind of problems is developed.Different from the others,this theory gives the multiple elasticallyscattered fields in all space regions.

Detecting spatio-temporal urban surface changes using identified temporary coherent scatterers

Synthetic aperture radar(SAR) is able to detect surface changes in urban areas with a short revisit time, showing its capability in disaster assessment and urbanization monitoring.Most presented change detection methods are conducted using couples of SAR amplitude images. However, a prior date of surface change is required to select a feasible image pair. We propose an automatic spatio-temporal change detection method by identifying the temporary coherent scatterers. Based on amplitude time series, χ^(2)-test and iterative single pixel change detection are proposed to identify all step-times: the moments of the surface change. Then the parameters, e.g., deformation velocity and relative height, are estimated and corresponding coherent periods are identified by using interferometric phase time series. With identified temporary coherent scatterers, different types of temporal surface changes can be classified using the location of the coherent periods and spatial significant changes are identified combining point density and F values. The main advantage of our method is automatically detecting spatio-temporal surface changes without prior information. Experimental results by the proposed method show that both appearing and disappearing buildings with their step-times are successfully identified and results by ascending and descending SAR images show a good agreement.

A technical review on persistent scatterer interferometry

This article focuses on reviewing the technologies of persistent scatterer interferometry （PSI）, which has been often used to monitor the deformation of Earth surface. Three critical steps in the implementation of PSI were introduced, i.e., （1） detection of persistent scatterer （PS）, （2） construction of PS network, and （3） PSI modeling and solution. Finally, the main problems and outlooks on the PSI technique are discussed and given.

Analyzing multi-circular loop scatterers by Maxwellian circuits

Calculating the current distribution in circular loop scatterers commonly involves complicated computation. In this paper, based on the theory of Maxwellian circuits （MC）, we propose a fast algorithm by solving a wave equation with constant parameters corresponding to the circular loop. Our method prodeces similar results compared to the methods using method of moments （MoM） with lower computational complexity. It is effective when there are parallel multiple circular loop scatterers. Experimental results show accuracy of the method.

Multi-Temporal Analysis of Land Subsidence in Toluca Valley (Mexico) through a Combination of Persistent Scatterer Interferometry (PSI) and Historical Piezometric Data

The Toluca Valley Aquifer (TVA) is considered one of the most overexploited aquifers in Mexico because of the high rate of groundwater extraction for supplying urban and industrial water to Mexico City and Toluca City, which causes land subsidence in urban and suburban areas. In this paper, we propose a multi-temporal analysis that uses persistent scatterer interferometry (PSI) method to evaluate the subsidence processes in Toluca Valley. The PSI results revealed differential movements of the ground of as much as 83 mm/year. A spatial variation of PSI results was identified with respect to previous studies using the conventional Din SAR methodology. The spatial distribution and density suggested the possibility of an expanding trend of subsidence process at north, northeast and east of the TVA, which corresponds to the region with the highest density of pumping wells for industrial and agricultural use.

Monitoring Landslide-Induced Displacements with TerraSAR-X Persistent Scatterer Interferometry (PSI): Gimigliano Case Study in Calabria Region (Italy)

This work provides a detailed detection of landslide-induced displacements at local scale on Gimigliano site (Italy), by means of PSI (Persistent Scatterers Interferometry) analysis, exploiting TerraSAR-X data acquired in November 2010-October 2011. In February-March 2010, several landslides affected Gimigliano, following high-intensity precipitation, and causing damages to structures and roads. In order to assess any spatial and temporal patterns of deformation, the present X-band PS data were compared with historical motion rates derived from ERS1/2 and ENVISAT satellites, and with geological and geomorphological evidences resulting from auxiliary data such as landslide databases and orthophotos referred to different dates, finally validated with recent field checks. The PSI analysis of the historical ground motion rates highlighted that the modern built-up area located downhill was already affected by surface ground deformation since 1993. A significant enlargement of the instability phenomena is detected across time. The recent PS data analysis and the in situ observations permitted us to accurately update the ground movements in the investigated site: their evidence allowed assessing a reactivation of the large deep-seated landslide zone on which the new urbanized area had built-up, with an average deformation rate of about 8 - 9 mm/yr. The higher instability phenomenon is affecting the eastern part of Gimigliano old village, with a mean displacement velocity reaching up values of -30 mm/yr, in the radar temporal acquisition of only 10 months. These outcomes can be taken into account for further hazard-reduction analysis and to support risk mitigation design within the investigated area.

Acoustic anechoic layers with singly periodic array of scatterers: Computational methods, absorption mechanisms, and optimal design

The acoustic properties of anechoic layers with a singly periodic array of cylindrical scatterers are investigated. A method combined plane wave expansion and finite element analysis is extended for out-of-plane incidence. The reflection characteristics of the anechoic layers with cavities and locally resonant scatterers are discussed. The backing is a steel plate followed by an air half space. Under this approximate zero transmission backing condition, the reflection reduction is induced by the absorption enhancement. The absorption mechanism is explained by the scattering/absorption cross section of the isolated scatterer. Three types of resonant modes which can induce efficient absorption are revealed. Due to the fact that the frequencies of the resonant modes are related to the size of the scatterers, anechoic layers with scatterers of mixed size can broaden the absorption band. A genetic optimization algorithm is adopted to design the anechoic layer with scatterers of mixed size at a desired frequency band from 2 kHz to l0 kHz for normal incidence, and the influence of the incident angle is also discussed.

Optimization of Scatterer Concentration in High-Gain Scattering Media

We report the scatterer concentration-dependent behaviour of laser action in high-gain scattering media.A modified model of random laser is proposed to explain the experimental results in good agreement.We may use this modified model to design and optimize random laser system.A further detailed model is needed to quantitatively analyse the far-field distribution of random laser action.

NONLINEAR INVERSION OF STRONG SCATTERER OF ELASTIC WAVE FOR TWO PARAMETERS IN HALF-SPACE

The inversion of strong scatter embedded in the half-space is animportant problem in engi- neering and a very difficult nonlinearproblem in mathematics, for which the Born iterative method is of noeffect. In this paper the moment method is used in the discretizationprocedure. A numerical approach is pr- esented by employing theregularization technique and DBI (distorted Born iterative) method.The simulation results show that the approach presented is efficient.

Cyclic Correlation of Diffuse Reflected Signal with Glucose Concentration and Scatterer Size

The utility of optical coherence tomography signal amplitudemeasurement to monitorglucose concentration in tissue phantom and blood samples from human subjectshas been explored. The diffusion equation based calculations as well as invivo OCT signal measurements confirm a cyclic correlation of signal intensity with glucose concentration and scatterer size.

Monitoring Surface Deformation Using Distributed Scatterers InSAR

In the past two decades,extensive and in-depth research has been conducted on Time Series InSAR technology with the advancement of high-performance SAR satellites and the accumulation of big SAR data.The introduction of distributed scatterers in Distributed Scatterers InSAR(DS-InSAR)has significantly expanded the application scenarios of InSAR geodetic measurement by increasing the number of measurement points.This study traces the history of DS-InSAR,presents the definition and characteristics of distributed scatterers,and focuses on exploring the relationships and distinctions among proposed algorithms in two crucial steps:statistically homogeneous pixel selection and phase optimization.Additionally,the latest research progress in this field is tracked and the possible development direction in the future is discussed.Through simulation experiments and two real InSAR case studies,the proposed algorithms are compared and verified,and the advantages of DS-InSAR in deformation measurement practice are demonstrated.This work not only offers insights into current trends and focal points for theoretical research on DS-InSAR but also provides practical cases and guidance for applied research.

Mie scatterers bring a resonator to an exceptional point

Exceptional points have given rise to many intriguing optical phenomena that are of fundamental importance for a variety of breakthrough technologies.The pre-defined Mie scatterers can bring a resonator to an exceptional point,and result in enhanced quality factor through coherently suppressing the backward scattering.

A novel AgNPs/MOF substrate-based SERS sensor for high-sensitive on-site detection of wheat gluten

Gluten,known as the major allergen in wheat,has gained increasing concerns in industrialized countries,resulting in an urgent need for accurate,high-sensitive,and on-site detection of wheat gluten in complex food systems.Herein,we proposed a silver nanoparticles(AgNPs)/metal-organic framework(MOF)substrate-based surface-enhanced Raman scattering(SERS)sensor for the high-sensitive on-site detection of wheat gluten.The detection occurred on the newly in-situ synthesized AgNPs/MOF-modified SERS substrate,providing an enhancement factor(EF)of 1.89×10^(5).Benefitting from the signal amplification function of AgNPs/MOF and the superiority of SERS,this sensor represented high sensitivity performance and a wide detection range from 1×10^(-15)mol/L to 2×10^(-6)mol/L with a detection limit of 1.16×10^(-16)mol/L,which allowed monitoring the trace of wheat gluten in complex food system without matrix interference.This reliable sandwich SERS sensor may provide a promising platform for high-sensitive,accurate,and on-site detection of allergens in the field of food safety.

Analysis of the joint detection capability of the SMILE satellite and EISCAT-3D radar

The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)satellite is a small magnetosphere–ionosphere link explorer developed cooperatively between China and Europe.It pioneers the use of X-ray imaging technology to perform large-scale imaging of the Earth’s magnetosheath and polar cusp regions.It uses a high-precision ultraviolet imager to image the overall configuration of the aurora and monitor changes in the source of solar wind in real time,using in situ detection instruments to improve human understanding of the relationship between solar activity and changes in the Earth’s magnetic field.The SMILE satellite is scheduled to launch in 2025.The European Incoherent Scatter Sciences Association(EISCAT)-3D radar is a new generation of European incoherent scatter radar constructed by EISCAT and is the most advanced ground-based ionospheric experimental device in the high-latitude polar region.It has multibeam and multidirectional quasi-real-time three-dimensional(3D)imaging capabilities,continuous monitoring and operation capabilities,and multiple-baseline interferometry capabilities.Joint detection by the SMILE satellite and the EISCAT-3D radar is of great significance for revealing the coupling process of the solar wind–magnetosphere–ionosphere.Therefore,we performed an analysis of the joint detection capability of the SMILE satellite and EISCAT-3D,analyzed the period during which the two can perform joint detection,and defined the key scientific problems that can be solved by joint detection.In addition,we developed Web-based software to search for and visualize the joint detection period of the SMILE satellite and EISCAT-3D radar,which lays the foundation for subsequent joint detection experiments and scientific research.