The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor ...The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 e V, exhibiting an intrinsic solar-blindness for deep-ultraviolet(DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.展开更多
We report the edge-defined-film-fed(EFG)-grown β-Ga_(2)O_(3)-based Schottky photodiodes.The device has a reverse leakage current of ~nA and a rectified ratio of ~10^(4) at ±5 V.In addition,the photodiode detecto...We report the edge-defined-film-fed(EFG)-grown β-Ga_(2)O_(3)-based Schottky photodiodes.The device has a reverse leakage current of ~nA and a rectified ratio of ~10^(4) at ±5 V.In addition,the photodiode detector shows a dark current of 0.3 pA,a photo-responsivity(R) of 2.875 mA/W,a special detectivity(D*) of 10^(10) Jones,and an external quantum efficiency(EQE) of 1.4% at zero bias,illustrating a self-powered operation.This work may advance the development of the Ga_(2)O_(3)-based Schottky diode solar-blind photodetectors.展开更多
基金supported by Grant-in-Aid for Scientific Research in the Ministry of Education,Culture,Sports,Science and Technology of the Japanese Government(No.18360341)
文摘The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 e V, exhibiting an intrinsic solar-blindness for deep-ultraviolet(DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.
基金Project supported by BUPT Excellent Ph.D.Students Foundation(Grant No.CX2020314)the National Natural Science Foundation of China(Grant Nos.61774019,51572033,and 51572241)+1 种基金the Fund of State Key Laboratory of Information Photonics and Optical Communications(BUPT)the Fundamental Research Funds for the Central Universities,China。
文摘We report the edge-defined-film-fed(EFG)-grown β-Ga_(2)O_(3)-based Schottky photodiodes.The device has a reverse leakage current of ~nA and a rectified ratio of ~10^(4) at ±5 V.In addition,the photodiode detector shows a dark current of 0.3 pA,a photo-responsivity(R) of 2.875 mA/W,a special detectivity(D*) of 10^(10) Jones,and an external quantum efficiency(EQE) of 1.4% at zero bias,illustrating a self-powered operation.This work may advance the development of the Ga_(2)O_(3)-based Schottky diode solar-blind photodetectors.
