Chemical vapor deposition(CVD)using gaseous hydrocarbon sources has shown great promise for large-scale graphene growth,but high growth temperatures(typically 1000℃)require sophisticated and expensive equipment,which...Chemical vapor deposition(CVD)using gaseous hydrocarbon sources has shown great promise for large-scale graphene growth,but high growth temperatures(typically 1000℃)require sophisticated and expensive equipment,which increases graphene production costs.Here,we demonstrate a new approach to produce graphene at low cost from scrap steel sheets treated by thermal evaporation of copper plating,which is a derivative of traditional CVD technology.Without additional carbon sources,graphene film was successfully prepared on copper-coated scrap steel sheets at 820℃.The resulting graphene has few defects and uniform morphology,comparable to CVD graphene grown at 1000℃.Finally,the obtained graphene film is used in combination with an interdigital electrode to detect NO_(2)successfully,showing excellent performance.This technology expands the application of graphene in the manufacture of gas sensing devices and is compatible with traditional microelectronics technology.展开更多
The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbid...The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbide-carbon bricks for the ladle bottom,those for the ladle wall have more pyrophyllite and the Al2O3 content of 36.32 mass%;their bulk density,apparent porosity and cold compressive strength are lower than the requirement of industry standard;they have poor anti-oxidation performance and are oxidized to form a porous layer during service,which loosens the brick lining structure thus leading to fracture,local wear and structural damage of bricks;(2)without preheating,steel scraps are not completely melted,resulting in slag or steel attachment at the mouth or the bottom of ladles thus increasing damage of ladles;(3)and the residual bricks react with the attached slag to form low melting point phases affecting their hot properties.The refractories for the lining of hot iron ladles must be improved in combination with process changes,not entirely by raw materials replacement to reduce costs.展开更多
This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount...This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount of molten iron,is analyzed,and the concept of a steel scrap threshold price is proposed.According to the analysis results,when the steel scrap unit price exceeds the steel scrap threshold price, an increase in the iron/steel ratio can reduce the production cost,and vice versa.When the gap between the steel scrap unit price and the steel scrap threshold price is relatively large, the impact of the iron/steel ratio on the production cost is more prominent.According to the calculation example,when steel production is fixed （284 358 t/month）and the steel scrap unit price is 263.2 yuan/t more than the steel scrap threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 750 000 yuan （2.63 yuan/t）.When the amount of molten iron is fixed （270 425 t/month）and the steel scrap unit price is 140.7 yuan/t more than the threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 430 000 yuan （1.5 yuan/t）.The results indicate that iron and steel enterprise should adjust the production strategy in time when the scrap price fluctuates, and then the production cost will be reduced.展开更多
基金the National Natural Science Foundation of China(No.52073305)Natural Science Foundation of Shandong Province(No.ZR2020QE048)+1 种基金State Key Laboratory of Heavy Oil Processing(No.SKLHOP202101006)National Defense Science and Technology Innovation Special Zone Project(No.22-05-CXZX-04-04-29).
文摘Chemical vapor deposition(CVD)using gaseous hydrocarbon sources has shown great promise for large-scale graphene growth,but high growth temperatures(typically 1000℃)require sophisticated and expensive equipment,which increases graphene production costs.Here,we demonstrate a new approach to produce graphene at low cost from scrap steel sheets treated by thermal evaporation of copper plating,which is a derivative of traditional CVD technology.Without additional carbon sources,graphene film was successfully prepared on copper-coated scrap steel sheets at 820℃.The resulting graphene has few defects and uniform morphology,comparable to CVD graphene grown at 1000℃.Finally,the obtained graphene film is used in combination with an interdigital electrode to detect NO_(2)successfully,showing excellent performance.This technology expands the application of graphene in the manufacture of gas sensing devices and is compatible with traditional microelectronics technology.
文摘The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbide-carbon bricks for the ladle bottom,those for the ladle wall have more pyrophyllite and the Al2O3 content of 36.32 mass%;their bulk density,apparent porosity and cold compressive strength are lower than the requirement of industry standard;they have poor anti-oxidation performance and are oxidized to form a porous layer during service,which loosens the brick lining structure thus leading to fracture,local wear and structural damage of bricks;(2)without preheating,steel scraps are not completely melted,resulting in slag or steel attachment at the mouth or the bottom of ladles thus increasing damage of ladles;(3)and the residual bricks react with the attached slag to form low melting point phases affecting their hot properties.The refractories for the lining of hot iron ladles must be improved in combination with process changes,not entirely by raw materials replacement to reduce costs.
基金The National Key Technology R&D Program during the 12th Five-Year Plan Period(No.2012BAF10B05)
文摘This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount of molten iron,is analyzed,and the concept of a steel scrap threshold price is proposed.According to the analysis results,when the steel scrap unit price exceeds the steel scrap threshold price, an increase in the iron/steel ratio can reduce the production cost,and vice versa.When the gap between the steel scrap unit price and the steel scrap threshold price is relatively large, the impact of the iron/steel ratio on the production cost is more prominent.According to the calculation example,when steel production is fixed （284 358 t/month）and the steel scrap unit price is 263.2 yuan/t more than the steel scrap threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 750 000 yuan （2.63 yuan/t）.When the amount of molten iron is fixed （270 425 t/month）and the steel scrap unit price is 140.7 yuan/t more than the threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 430 000 yuan （1.5 yuan/t）.The results indicate that iron and steel enterprise should adjust the production strategy in time when the scrap price fluctuates, and then the production cost will be reduced.
