A smart decontamination device is developed for small-size radioactive scrap metal(SSRSM)arisen from nuclear facilities.The abrasion pin in rotating magnetic field and ultrasonic wave cleaner are used for solving the ...A smart decontamination device is developed for small-size radioactive scrap metal(SSRSM)arisen from nuclear facilities.The abrasion pin in rotating magnetic field and ultrasonic wave cleaner are used for solving the problems of the second decontamination and high treatment cost.At first,the decontamination efficiency of each device is improved by upgrading the design.Optimal operating conditions are determined for each device.Next,both techniques are applied sequentially.Experimental results show that the efficiency of combined decontamination device is higher than that of each device.With the use of the developed device,the various SSRSMs are decontaminated for 15 min treatment in magnetic abrasion device and15 min treatment in ultrasonic cleaning device.Decontamination index ranges from18 to 56.Absolute values of all decontaminated samples are below the background value.展开更多
Heavy metal exposure remains a significant public health problem, particularly in sub-Saharan Africa where use of artisanal cookware made from recycled metallic materials is still common. In this study, the effect of ...Heavy metal exposure remains a significant public health problem, particularly in sub-Saharan Africa where use of artisanal cookware made from recycled metallic materials is still common. In this study, the effect of cookware composition, cleaning material, heating duration and temperature on metal migration from different cookware, including artisanal pans was investigated. Trace element concentrations were determined with Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Locally fabricated cookware leached the highest levels of metals, where the levels of Pb (9.00 ± 0.80 × 10<sup>-2</sup> mg/l), Al (11.40 ± 0.02 × 10<sup>-2</sup> mg/l), Cd (5.80 ± 0.30 × 10<sup>-2</sup> mg/l), Cr (6.60 ± 0.03 × 10<sup>-2</sup> mg/l) and Ni (3.00 ± 0.01 × 10<sup>-2</sup> mg/l) were above the WHO permissible limits of heavy metals for drinking water. Steel wire was the most aggressive cleaning material to the cookware surfaces, followed by sand and then ash. For cookware heated at 100°C and above, an exponential relationship between temperature and the migration of Al, Pb and Cd was observed. The findings revealed heavy metal exposure from cookware usage, which poses potential health risks to the population. There is need for policies and civic education to minimize this exposure.</sup>展开更多
In this work the radiological dose and risks resulting from recycling of radioactive contaminated NORM scrap metal that produced from one of oil and gas production companies in Egypt, were determined by using RESRAD-R...In this work the radiological dose and risks resulting from recycling of radioactive contaminated NORM scrap metal that produced from one of oil and gas production companies in Egypt, were determined by using RESRAD-RECYCLE computer code. Two scenarios were used: the first was the workers’ scenario, while the second was end-use product scenario. Workers’ scenario was used in this study for evaluating the dose and risk to workers who process recycled materials. This scenario focused on the transport of radioactive NORM scrap metal from the place of origin to the smelter (scrap delivery step). Scenarios for six different workers were included under the scrap delivery step: two workers scrap cutter, two workers scrap loader, and two workers scrap truck driver. The values for each scenario were specified on the basis of processing 200 tons of NORM scrap metal. Because these operations occur before melting of the metal, mass and radionuclide partitioning factors were not applied in the scrap metal delivery step. The radionuclide concentration of the NORM scrap metal was used directly in the dose calculation. The maximum doses received from direct external exposure to all radio nuclides during cutter/sorter, scrap truck driver and unloading of scrap metals were 2.14E-04, 1.4E-06 and 1.86E-05 (mSv) respectively. The excess cancer risks for all radio nuclides during cutter/sorter of scrap metals reached 1.25E-07. Radiation exposures incurred by the scrap unloaders and scrap cutters/sorters were greater than those incurred by the other workers for their closer exposure distances and longer time.展开更多
As a new attempt to recycle minute metal scraps, the possibility of manufacturing design materials by semisolid extrusion processing was shown.A design material with an intended shape, such as a character or petal sha...As a new attempt to recycle minute metal scraps, the possibility of manufacturing design materials by semisolid extrusion processing was shown.A design material with an intended shape, such as a character or petal shape, was manufactured using minute metal scraps.Similarly, a design material with an intended color pattern for each metal, such as red copper in a white aluminum matrix, resembling grainlike wood, was manufactured by mixing two or more types of minute metal scrap.In addition, secondary design materials, which have engraved patterns on the surface of the target metal made by an electric discharge machine using the above primary design material as an electrode, were manufactured.展开更多
Recycling retired cars can relieve the environmental pollution and resource waste efficiently.However,a few publications can be found on the failure mechanisms and optimization method of recycling equipment,shredders....Recycling retired cars can relieve the environmental pollution and resource waste efficiently.However,a few publications can be found on the failure mechanisms and optimization method of recycling equipment,shredders.Thus,the failure mechanisms and structural optimization of shredder hammers for retired cars are studied aiming improving shredding efficiency and reducing cost.Failure types of shredder hammer are studied theoretically,and it is found that wear failure and fatigue failure are the two main failure types of shredder hammer.The shredding process of metal scraps is analyzed by finite element method,and it can be divided into four stages based on the stress states：initial stage,collision stage,grinding stage and separation stage.It is proved that the shredding efficiency can be improved by increasing cutouts on the hammer head.Finally,it is determined that the hammer with two cutouts is the optimal structure for metal scraps,which can improve the shredding efficiency by 20% and lengthen the hammer life by 15%.This study provides scientific basis for the industry application and theoretical foundation for further research.展开更多
Several typical methods for the recovery of Ni-Cd batteries are described in detail. Based on the comparison between the hydrometallurgical process and the pyrometallurgical process, the latter is selected as the suit...Several typical methods for the recovery of Ni-Cd batteries are described in detail. Based on the comparison between the hydrometallurgical process and the pyrometallurgical process, the latter is selected as the suitable method for recycling Ni-Cd batteries in China.展开更多
This study compared the physicochemical parameters and heavy metal levels in soil samples from selected anthropogenic sites within Enugu metropolis, Enugu State, Nigeria using standard analytical methods. Soil samples...This study compared the physicochemical parameters and heavy metal levels in soil samples from selected anthropogenic sites within Enugu metropolis, Enugu State, Nigeria using standard analytical methods. Soil samples at depths (0 - 20 cm) and (20 - 40 cm) were collected from waste dump sites, metal scrap dumps, fuel filling stations and auto-mechanic workshops and analyzed for physicochemical characteristics and heavy metal levels. Atomic absorption spectrophotometer was used for heavy metal determination while conventional analytical methods were employed for physicochemical parameters evaluation of the soil samples. At soil depths 0 - 20 cm and 20 - 40 cm the respective mean range of pH, electrical conductivity, organic matter and organic carbon contents in the soil samples were, 6.33 - 6.74, 101.46 - 123.21 <em>μ</em>S/cm, 6.41% - 8.35% and 13.73% - 16.14% for auto-mechanic workshops;6.92 - 7.43, 56.46 - 60.02 <em>μ</em>S/cm, 1.53% - 2.20% and 11.93% - 12.60% for fuel filling stations;7.14 - 7.84, 70.81 - 77.71 <em>μ</em>S/cm, 3.81% - 4.12% and 8.57% - 9.24% for metal scrap dumps;6.54 - 6.81, 94.40 - 100.71 <em>μ</em>S/cm, 8.83% - 10.75% and 18.26% - 20.81% for waste dump sites. The pH of the top soil samples from auto-mechanical workshop was below the WHO recommended limits for agricultural purposes. The physic-chemical characteristics of the soil samples decreased with soil depths indicating therefore that anthropogenic activities greatly influence the soil characteristics at the top soils than the sub-soils. The electrical conductivity values of top and sub-soil samples from the studied auto-mechanical workshops were above the recommended limits. At soil depths 0 - 20 cm and 20 - 40 cm, the respective mean range of Zn, Pb and Cd in the soil samples were 17.29 - 19.16 <em>μ</em>g/g, 0.704 - 0.96 <em>μ</em>g/g and 0.26 - 0.33 <em>μ</em>g/g for auto-mechanic workshops;4.13 - 4.88 <em>μ</em>g/g, 0.21 - 0.32 <em>μ</em>g/g and 0.03 - 0.11 <em>μ</em>g/g for fuel filling stations;30.02 - 36.11 <em>μ</em>g/g, 0.43 - 0.48 <em>μ</em>g/g and 0.15 - 0.19 <em>μ</em>g/g for metal scrap dumps;9.30 - 10.84 <em>μ</em>g/g, 0.53 - 0.60 <em>μ</em>g/g and 0.38 - 0.45 <em>μ</em>g/g for waste dump sites. The mean levels of Pb in soil samples from mechanic workshops and waste dump sites were above the recommended permissible limits for agricultural purposes. The study therefore indicated that these sites (auto-mechanic workshops and waste dump sites) could be major sources of Pb pollution to nearby farmlands, streams and the general environment. Plants grown on or around these sites may not produce high yields and could be severely contaminated with heavy metals which portend health danger to food consumers within the environment.展开更多
Optimization of scrap utilization, through maintaining a reasonable heavy scrap ratio, determination of scrap yield, development of substitutes for scrap, recycling of high-alloy scrap and optimization of scrap utiliz...Optimization of scrap utilization, through maintaining a reasonable heavy scrap ratio, determination of scrap yield, development of substitutes for scrap, recycling of high-alloy scrap and optimization of scrap utilization technology, was investigated in this paper, in terms of the supply of metal materials, production cost, production quality and environment protection. Then, recycling of solid waste resources was discussed, and the utilization conditions and methods of slag-steel, slag-iron, steel-slag, etc. were determined. Finally, the management system for comprehensive resource utilization was introduced.展开更多
基金The MKE(Ministry of Knowledge Economy),Korea,under the Convergence-ITRC(Convergence Information Technology Research Center)support program supervised by the NIPA(National IT Industry Promotion Agency)(NIPA-2012 C6150-1101-0004)
文摘A smart decontamination device is developed for small-size radioactive scrap metal(SSRSM)arisen from nuclear facilities.The abrasion pin in rotating magnetic field and ultrasonic wave cleaner are used for solving the problems of the second decontamination and high treatment cost.At first,the decontamination efficiency of each device is improved by upgrading the design.Optimal operating conditions are determined for each device.Next,both techniques are applied sequentially.Experimental results show that the efficiency of combined decontamination device is higher than that of each device.With the use of the developed device,the various SSRSMs are decontaminated for 15 min treatment in magnetic abrasion device and15 min treatment in ultrasonic cleaning device.Decontamination index ranges from18 to 56.Absolute values of all decontaminated samples are below the background value.
文摘Heavy metal exposure remains a significant public health problem, particularly in sub-Saharan Africa where use of artisanal cookware made from recycled metallic materials is still common. In this study, the effect of cookware composition, cleaning material, heating duration and temperature on metal migration from different cookware, including artisanal pans was investigated. Trace element concentrations were determined with Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Locally fabricated cookware leached the highest levels of metals, where the levels of Pb (9.00 ± 0.80 × 10<sup>-2</sup> mg/l), Al (11.40 ± 0.02 × 10<sup>-2</sup> mg/l), Cd (5.80 ± 0.30 × 10<sup>-2</sup> mg/l), Cr (6.60 ± 0.03 × 10<sup>-2</sup> mg/l) and Ni (3.00 ± 0.01 × 10<sup>-2</sup> mg/l) were above the WHO permissible limits of heavy metals for drinking water. Steel wire was the most aggressive cleaning material to the cookware surfaces, followed by sand and then ash. For cookware heated at 100°C and above, an exponential relationship between temperature and the migration of Al, Pb and Cd was observed. The findings revealed heavy metal exposure from cookware usage, which poses potential health risks to the population. There is need for policies and civic education to minimize this exposure.</sup>
文摘In this work the radiological dose and risks resulting from recycling of radioactive contaminated NORM scrap metal that produced from one of oil and gas production companies in Egypt, were determined by using RESRAD-RECYCLE computer code. Two scenarios were used: the first was the workers’ scenario, while the second was end-use product scenario. Workers’ scenario was used in this study for evaluating the dose and risk to workers who process recycled materials. This scenario focused on the transport of radioactive NORM scrap metal from the place of origin to the smelter (scrap delivery step). Scenarios for six different workers were included under the scrap delivery step: two workers scrap cutter, two workers scrap loader, and two workers scrap truck driver. The values for each scenario were specified on the basis of processing 200 tons of NORM scrap metal. Because these operations occur before melting of the metal, mass and radionuclide partitioning factors were not applied in the scrap metal delivery step. The radionuclide concentration of the NORM scrap metal was used directly in the dose calculation. The maximum doses received from direct external exposure to all radio nuclides during cutter/sorter, scrap truck driver and unloading of scrap metals were 2.14E-04, 1.4E-06 and 1.86E-05 (mSv) respectively. The excess cancer risks for all radio nuclides during cutter/sorter of scrap metals reached 1.25E-07. Radiation exposures incurred by the scrap unloaders and scrap cutters/sorters were greater than those incurred by the other workers for their closer exposure distances and longer time.
文摘As a new attempt to recycle minute metal scraps, the possibility of manufacturing design materials by semisolid extrusion processing was shown.A design material with an intended shape, such as a character or petal shape, was manufactured using minute metal scraps.Similarly, a design material with an intended color pattern for each metal, such as red copper in a white aluminum matrix, resembling grainlike wood, was manufactured by mixing two or more types of minute metal scrap.In addition, secondary design materials, which have engraved patterns on the surface of the target metal made by an electric discharge machine using the above primary design material as an electrode, were manufactured.
基金Supported by Innovation Team Development Plan(Grant No.IRT13087)Major Scientific and Technological Innovation Project in Hubei Province,China(Grant No.2015AAA014)Fundamental Research Funds for the Central Universities,China(Grant No.2015-yb-010)
文摘Recycling retired cars can relieve the environmental pollution and resource waste efficiently.However,a few publications can be found on the failure mechanisms and optimization method of recycling equipment,shredders.Thus,the failure mechanisms and structural optimization of shredder hammers for retired cars are studied aiming improving shredding efficiency and reducing cost.Failure types of shredder hammer are studied theoretically,and it is found that wear failure and fatigue failure are the two main failure types of shredder hammer.The shredding process of metal scraps is analyzed by finite element method,and it can be divided into four stages based on the stress states：initial stage,collision stage,grinding stage and separation stage.It is proved that the shredding efficiency can be improved by increasing cutouts on the hammer head.Finally,it is determined that the hammer with two cutouts is the optimal structure for metal scraps,which can improve the shredding efficiency by 20% and lengthen the hammer life by 15%.This study provides scientific basis for the industry application and theoretical foundation for further research.
文摘Several typical methods for the recovery of Ni-Cd batteries are described in detail. Based on the comparison between the hydrometallurgical process and the pyrometallurgical process, the latter is selected as the suitable method for recycling Ni-Cd batteries in China.
文摘This study compared the physicochemical parameters and heavy metal levels in soil samples from selected anthropogenic sites within Enugu metropolis, Enugu State, Nigeria using standard analytical methods. Soil samples at depths (0 - 20 cm) and (20 - 40 cm) were collected from waste dump sites, metal scrap dumps, fuel filling stations and auto-mechanic workshops and analyzed for physicochemical characteristics and heavy metal levels. Atomic absorption spectrophotometer was used for heavy metal determination while conventional analytical methods were employed for physicochemical parameters evaluation of the soil samples. At soil depths 0 - 20 cm and 20 - 40 cm the respective mean range of pH, electrical conductivity, organic matter and organic carbon contents in the soil samples were, 6.33 - 6.74, 101.46 - 123.21 <em>μ</em>S/cm, 6.41% - 8.35% and 13.73% - 16.14% for auto-mechanic workshops;6.92 - 7.43, 56.46 - 60.02 <em>μ</em>S/cm, 1.53% - 2.20% and 11.93% - 12.60% for fuel filling stations;7.14 - 7.84, 70.81 - 77.71 <em>μ</em>S/cm, 3.81% - 4.12% and 8.57% - 9.24% for metal scrap dumps;6.54 - 6.81, 94.40 - 100.71 <em>μ</em>S/cm, 8.83% - 10.75% and 18.26% - 20.81% for waste dump sites. The pH of the top soil samples from auto-mechanical workshop was below the WHO recommended limits for agricultural purposes. The physic-chemical characteristics of the soil samples decreased with soil depths indicating therefore that anthropogenic activities greatly influence the soil characteristics at the top soils than the sub-soils. The electrical conductivity values of top and sub-soil samples from the studied auto-mechanical workshops were above the recommended limits. At soil depths 0 - 20 cm and 20 - 40 cm, the respective mean range of Zn, Pb and Cd in the soil samples were 17.29 - 19.16 <em>μ</em>g/g, 0.704 - 0.96 <em>μ</em>g/g and 0.26 - 0.33 <em>μ</em>g/g for auto-mechanic workshops;4.13 - 4.88 <em>μ</em>g/g, 0.21 - 0.32 <em>μ</em>g/g and 0.03 - 0.11 <em>μ</em>g/g for fuel filling stations;30.02 - 36.11 <em>μ</em>g/g, 0.43 - 0.48 <em>μ</em>g/g and 0.15 - 0.19 <em>μ</em>g/g for metal scrap dumps;9.30 - 10.84 <em>μ</em>g/g, 0.53 - 0.60 <em>μ</em>g/g and 0.38 - 0.45 <em>μ</em>g/g for waste dump sites. The mean levels of Pb in soil samples from mechanic workshops and waste dump sites were above the recommended permissible limits for agricultural purposes. The study therefore indicated that these sites (auto-mechanic workshops and waste dump sites) could be major sources of Pb pollution to nearby farmlands, streams and the general environment. Plants grown on or around these sites may not produce high yields and could be severely contaminated with heavy metals which portend health danger to food consumers within the environment.
文摘Optimization of scrap utilization, through maintaining a reasonable heavy scrap ratio, determination of scrap yield, development of substitutes for scrap, recycling of high-alloy scrap and optimization of scrap utilization technology, was investigated in this paper, in terms of the supply of metal materials, production cost, production quality and environment protection. Then, recycling of solid waste resources was discussed, and the utilization conditions and methods of slag-steel, slag-iron, steel-slag, etc. were determined. Finally, the management system for comprehensive resource utilization was introduced.
