Seismic Data Processing Approaches for the Study of Gas Hydrates in the East China Sea

A comprehensive study of the data profiles, including the 2D seismic data, single channel seismic data, shallow sections, etc., reveals that gas hydrates occur in the East China Sea. A series of special techniques are used in the processing of seismic data, which include enhancing the accuracy of velocity analysis and resolution, estimating the wavelet, suppressing the multiple, preserving the relative amplitude, using the DMO and AVO techniques and some special techniques in dealing with the wave impedance. The existence of gas hydrates is reflected in the subbottom profiles in the appearance of BSRs, amplitude anomalies, velocity anomalies and AVO anomalies, etc. Hence the gas hydrates can be identified and predicted. It is pointed out that the East China Sea is a favorable area of the gas hydrates resource, and the Okinawa Trough is a target area of gas hydrates reservoir.

Seismic Data Processing and Interpretation on the Loess Plateau, Part1: Seismic Data Processing

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.

A novel technique for automatic seismic data processing using both integral and local feature of seismograms

A novel technique for automatic seismic data processing using both integral and local feature of seismograms was presented in this paper. Here, the term integral feature of seismograms refers to feature which may depict the shape of the whole seismograms. However, unlike some previous efforts which completely abandon the DIAL approach, i.e., signal detection, phase identifi- cation, association, and event localization, and seek to use envelope cross-correlation to detect seismic events directly, our technique keeps following the DIAL approach, but in addition to detect signals corresponding to individual seismic phases, it also detects continuous wave-trains and explores their feature for phase-type identification and signal association. More concrete ideas about how to define wave-trains and combine them with various detections, as well as how to measure and utilize their feature in the seismic data processing were expatiated in the paper. This approach has been applied to the routine data processing by us for years, and test results for a 16 days＇ period using data from the Xinjiang seismic station network were presented. The automatic processing results have fairly low false and missed event rate simultaneously, showing that the new technique has good application prospects for improvement of the automatic seismic data processing.

Data processing of the Kuiyang-ST2000 deep-towed high-resolution multichannel seismic system and application to South China Sea data

The Kuiyang-ST2000 deep-towed high-resolution multichannel seismic system was designed by the First Institute of Oceanography,Ministry of Natural Resources(FIO,MNR).The system is mainly composed of a plasma spark source(source level:216 dB,main frequency:750 Hz,frequency bandwidth:150-1200 Hz)and a towed hydrophone streamer with 48 channels.Because the source and the towed hydrophone streamer are constantly moving according to the towing configuration,the accurate positioning of the towing hydrophone array and the moveout correction of deep-towed multichannel seismic data processing before imaging are challenging.Initially,according to the characteristics of the system and the towing streamer shape in deep water,travel-time positioning method was used to construct the hydrophone streamer shape,and the results were corrected by using the polynomial curve fitting method.Then,a new data-processing workflow for Kuiyang-ST2000 system data was introduced,mainly including float datum setting,residual static correction,phase-based moveout correction,which allows the imaging algorithms of conventional marine seismic data processing to extend to deep-towed seismic data.We successfully applied the Kuiyang-ST2000 system and methodology of data processing to a gas hydrate survey of the Qiongdongnan and Shenhu areas in the South China Sea,and the results show that the profile has very high vertical and lateral resolutions(0.5 m and 8 m,respectively),which can provide full and accurate details of gas hydrate-related and geohazard sedimentary and structural features in the South China Sea.

Application of multi-scaled morphology in denoising seismic data

In this paper, multi-scaled morphology is introduced into the digital processing domain for land seismic data. First, we describe the basic theory of multi-scaled morphology image decomposition of exploration seismic waves; second, we illustrate how to use multi-scaled morphology for seismic data processing using two real examples. The first example demonstrates suppressing the surface waves in pre-stack seismic records using multi-scaled morphology decomposition and reconstitution and the other example demonstrates filtering different interference waves on the seismic record. Multi-scaled morphology filtering separates signal from noise by the detailed differences of the wave shapes. The successful applications suggest that multi-scaled morphology has a promising application in seismic data processing.

Application of Fractional Fourier Transform in seismic data denoising

Data processing is a basic and crucial factor in seismic exploration,which can influence the effect of subsequent processing directly. Thus the selection of appropriate method for data processing is one of the most important tasks throughout the work. By simulating,the authors analyze and compare Fractional Fourier Transform( FRFT) and Wigner-Ville distribution( WVD),then summarize the similarities and advantages and disadvantages of the two methods. The results reveal that FRFT is more effective and suitable for application in seismic exploration than WVD.

Prediction of Subtle Thin Gas Reservoir in the Loess Desert Area in the North of Ordos Basin

For thin gas reservoir of low-porosity and low-permeability in the loess desert area, a suite of lateral reservoir prediction techniques has been developed by Changqing Oil Company and the excellent effects achieved in exploration and exploitation in the areas such as Yulin, Wushenqi,Suligemiao, Shenmu etc., so that the Upper Paleozoic gas reserve has been stably increasing for eight years in Changqing Oilfield. The paper analyzed the effects and experience of the application of these techniques in detail.