Deep seismic sounding investigation into the deep structure of the magma system in Changbaishan-Tianchi volcanic region

The magma system of Changbaishan-Tianchi Volcanic region is studied with three-dimensional deep seismic sounding (DSS) technique. The results show that the magma system of Changbaishan-Tianchi volcanic region, mainly characterized by low velocity of P wave, can be divided into three parts in terms of depth. At the depth range of 9-15 km, the distribution of the magma system is characterized by extensiveness, large scale and near-SN orientation. This layer is the major place for magma storage. From the depth of 15 km down to the lower crust, it is characterized by small lateral scale, which indicates the 'trace' of magma intrusion from the upper mantle into the crust and also implies that the magma system most probably extends to the upper mantle, or even deeper.(less than 8-9 km deep), the range of magma distribution is even smaller, centering on an SN-oriented area just north of the Tianchi crater. If low velocity of P wave is related to the magma system, it then reflects that the magma here is still in a state of relatively high temperature. In this sense, the magma system of Changbaishan-Tianchi volcanic region is at least not 'remains', in other words, it is in an 'active' state.

Crustal Structure of the Chuan-Dian Block Revealed by Deep Seismic Sounding and its Implications for the Outward Expansion of the East Tibetan Plateau

The Chuan-Dian Block(CDB)is located in the southeastern margin of the Tibetan Plateau,with a complex geological structure and active regional faults.The present tectonic condition with strong crustal deformation is closely related to the ongoing collision of the India and Eurasia plates since 65 Ma.The study of the crustal structure of this area is key to revealing the evolution and deep geodynamics of the lateral collision zone of the Tibetan Plateau.Deep seismic sounding is the most efficient method with which to unravel the velocity structure of the whole crust.Since the 1980s,19 deep seismic sounding profiles have been captured within the CDB area.In this study,we systematically integrate the research results of the 19 profiles in this area,then image the 3D crustal velocity,by sampling with a 5 km spacing and 2D/3D Kriging interpolation.The results show the following.(1)The Moho depth in the study area deepens from 30 km in the south to 66 km in the north,whereas there is no apparent variation from west to east.The Pn wave velocity is higher in stable tectonic units,such as 7.95 km/s in the Lanping-Simao block and 7.94 km/s in the western margin of the Yangtze block,than in active or mobile tectonic units,such as 7.81 km/s in the Baoshan block,7.72 km/s in the Tengchong block and 7.82 km/s in the Zhongdian block.(2)The crustal nature of the Tengchong block,the northern Lanping-Simao block and the Zhongdian block reflects a type of orogenic belt,having relatively strong tectonic activities,whereas the crustal nature of the central Lanping-Simao block and the western margin of the Yangtze block represents a type of platform.The different features of the upper-middle crust velocity,Moho depth and Pn wave velocity to both sides of the Red River fault zone and the Xianshuihe fault zone,reflect that they are clearly ultra-crustal.(3)Based on the distribution of the low velocity zones in the crust,the crustal material of the Tibetan Plateau is flowing in a NW–SE direction to the north of 26°N and to the west of 101°E,then diverting to flowing eastwards to the east of 101°E.

Basic Features of the Crustal Structure in the Lower Yangtze and Its Neighboring Area in the Chinese Mainland： Review of Deep Seismic Sounding Research

The Deep Seismic Sounding( DSS) projects carried out from the 1970 s in the lower Yangtze region and its neighboring area were reviewed in this paper,then the basic wave group features of those wide angle reflection / refraction record sections,and of the crustal structure are summarized. It shows that there were in total five clear wave groups on the record sections,which include the first arrival Pg,the reflection P1 from the bottom interface of the upper crust,the reflection P3 from the bottom interface of the middle crust,the strong reflection Pm from the Moho boundary,and the refraction Pn from uppermost mantle. In general,these phases are easily consistently traced and compared,despite some first arrivals being delayed or arriving earlier than normal due to the shallow sedimentary cover or bedrocks. In particular,in the Dabie Mountain region the seismic events of a few gathered shots always have weak reflection energy,are twisted,or exhibit disorganized waveforms, which could be attributed to the disruption variations of reflection depth,the broken Moho,and the discontinuity of the reflection boundary within crust. The regional crustal structures are composed of the upper,middle and lower crust,of which the middle and lower layers can be divided into two weak reflection ones. The crustal thickness of the North China and Yangtze platform are 30km- 36 km,and the Moho exhibits a flat geometry despite some local uplifts. The average pressure velocity in lower crust beneath this two tectonic area is 6. 7 ± 0. 3km / s. Nevertheless,beneath the Dabieshan area the crustal thickness is 32km- 41 km,the Moho bends down sharply andtakes an abrupt 4km- 7km dislocation in the vertical direction. The average pressure velocity in the lower crust beneath the Dabieshan area is 6. 8 ± 0. 2km / s.

Genetic algorithm in seismic waveform inversion and its application in deep seismic sounding data interpretation

A genetic algorithm of body waveform inversion is presented for better understanding of crustal and upper mantle structures with deep seismic sounding （DSS） waveform data. General reflection and transmission synthetic seismogram algorithm, which is capable of calculating the response of thin alternating high and low velocity layers, is applied as a solution for forward modeling, and the genetic algorithm is used to find the optimal solution of the inverse problem. Numerical tests suggest that the method has the capability of resolving low-velocity layers, thin alternating high and low velocity layers, and noise suppression. Waveform inversion using P-wave records from Zeku, Xiahe and Lintao shots in the seismic wide-angle reflection/refraction survey along northeastern Qinghai-Xizang （Tibeteau） Plateau has revealed fine structures of the bottom of the upper crust and alternating layers in the middle/lower crust and topmost upper mantle.

Multiple phases analysis of deep seismic sounding records in North China Craton

The North China Craton(NCC)is a key region to study the destruction of the ancient craton.Two groups of phases(denoted as"Pw1"and"Pw2"),which are parallel to the PmP phase reflected from the Moho discontinuity and the PLP phase reflected from the Lithosphere and Asthenosphere Boundary(LAB)respectively,are found on the record section of the Rongcheng-XinzhouAlxa long-range deep seismic sounding profile.The nature of the two phases is still unclear,although they are clearly observable and reverberant.In this paper,we use travel time inversion and amplitude forward modelling to fit the reflected and refracted phases in the lithosphere.The results show:(1)the Pw1 is a multiple reflected phase which is successively reflected by the crystalline basement,the surface,the Moho and then finally received on the surface;(2)the Pw2 phase is also a multiple reflected phase successively reflected by the crystalline basement,the surface,the LAB interface and then received on the surface.We conclude that the significant velocity difference between the thick sedimentary cover and the crystalline basement in the North China rifted basin may be the main reason for generating the multiple reflections.Furthermore,the two multiple reflections provide potent constraints on the lithospheric velocity model,and constitute seismological evidence for the lithospheric thinning in the eastern NCC.

The movement age of hidden fault and analysis on width of its effect zone from shallow seismic sounding and drilling data

Field experimental seismic sounding permitted us to obtain optimal shallow seismic reflection sounding parameters.In process of data processing,we obtained a high-qualitative shallow seismic reflection sounding profile by using the techniques such as filtering,edition surgical blanking,prediction deconvolution,fitting static correlation of first arrival time,and velocity analysis.Comprehensive analysis on the information of reflection wave groups along the seismic sounding profile and the stratigraphic and neogeochronological data obtained from many drills near the sounding line reveals that the upper termination of the detected fault zone is located at depth of 75~80 m,in the Middle Pleistocene deposits dated to be about 220 ka BP.The continuity,discontinuity,increasing and decreasing amount of reflection wave groups and change of their configurations,in combination with geological columns of drills,permitted us to know that the width of upper termination of the fault zone is 100 m.It can be inferred from the variation of number of reflection wave groups along the profile that the scarp of hidden fault is 200 m wide and the fault is a synsedimentary active fault in the Early Pleistocene and the early stage of Middle Pleistocene.No tectonic movement,which offset the covering deposits,had occurred since the late stage of Middle Pleistocene.

Differences in lithospheric structures between two sides of Taihang Mountain obtained from the Zhucheng-Yichuan deep seismic sounding profile

A 2-D model of lithospheric velocity structures in the southern part of the North China Craton was obtained using data from the Zhucheng-Yichuan deep seismic sounding profile.Results show that there are great differences in lithospheric structures between two sides of Taihang Mountain.In the eastern region,the lithosphere is thinner,with a thickness of about 70-80 km,while in the western region,the thickness is 85-120 km.There is a jump of the lithospheric thickness across Taihang Mountain gravity anomaly belt with a magnitude of about 30 km.P wave velocities of the lithospheric mantle and lower crust are lower in the eastern region and higher in the western region.In the eastern region,there are low velocity bodies in the middle and lower crust,while none were found in the western region.These differences indicate that the Taihang Mountain gravity anomaly belt is a belt with a abrupt change of lithospheric thickness and lithological composition.According to the Pm waveform,it can be deduced that the Moho in the eastern region is not a sharp discontinuity,but a complex transitional zone.From a preliminary analysis,it is found that the geothermal mechanical-chemical erosion could be the main mechanism causing the thinning and destruction of the lithosphere beneath the eastern side of Taihang Mountain.In addition,subduction of the Pacific Plate is an important factor which changes the properties of the lithospheric mantle of the North China Craton.

Study on the velocity structure of the crust in Southwest Yunnan of the north-south seismic belt—Results from the Menghai-Gengma-Lushui deep seismic sounding profile

Southwest Yunnan, located in the southern segment of the north-south seismic belt, is one of the regions with strong tectonic movement and seismic activity in China. Study on the characteristics of tectonic setting and deep geophysical field in the region is an important issue in basic science. In 2013, we conducted a 600-km-long Menghai-Gengma-Lushui profile of deep seismic wide-angle reflection/refraction and high-resolution seismic refraction in Southwest Yunnan. In this paper, we use 6 groups of clear intracrustal P-wave phases picked from the seismic record sections of 11 shots to build a velocity structure model of basement and 2D crustal P-wave of the region by using finite difference inversion and ray travel time forward fitting technology. The results show that, from south to north, the crust gradually thickens along the profile and its basement shows a significant lateral heterogeneity. In the vicinity of the Nanting River fault, the basement structure shows the character of alternate depressions and uplifts, and the shallowest basement is about 1.0 kin. In the vicinity of Tengchong and Lancang, the basement is about 5.0 km deep. The velocity of the middle and lower crust in the region generally increases with the increasing of depth. At the block boundary and beneath the fault tectonic belt, the velocity contours show apparent irregularity and the P-wave velocity changes sharply. In this region, the Moho gradually deepens from south to north with relatively large lateral undulations. The shallowest point of the Moho is located near Menghai at a depth of about 32.0 km. The deepest point of the Moho is located near Tengchong at a depth of about 40.5 km. Between Gengma and Yongde, the Moho shows significantly fast uplifting and depressing with an amplitude of about 4.0 km. Beneath the Nanting River fault, Longling-Ruili fault, Dayingjiang fault and Tengchong volcano, the basement velocity structure, 2D crustal P-wave velocity structure, distribution of average profile velocity and intracrustal interface spreading also show significant changes from the basement to the top of the Moho, indicating that the crustal velocity and medium physical properties beneath the fault tectonic belt are apparently different from the crustal materials on its both sides, which suggests that these faults should be in a certain scale and may extend to the lower crust or the top of the upper mantle. The earthquakes in the region mainly occurred at a depth of 10-20 km, and the seismic activity is related to the intracrustal medium velocity difference and fault belt distribution. The results can serve as the important data of the crust-mantle structure for the analysis of the deep tectonic setting, earthquake precise positioning, seismogenic structure modeling of the seismic activities in Southwest Yunnan, as well as the important reference for the evaluation of seismic hazard and the planning of earthquake disaster mitigation of this region.

Crustal velocity structure of the Shaowu-Nanping-Pingtan transect through Fujian from deep seismic sounding-tectonic implications

The Shaowu-Nanping-Pingtan deep seismic sounding profile is located in northern Fujian Province. High-quality seismic sounding data were acquired by five large explosive blasts received by 133 digital seismic instruments along the profile. Based on seismic facies analysis and travel-time picking on shot record sections, a model of the velocity structure of upper crust was developed by finite-difference tomography of the first breaks; the 2-D P-wave velocity structure and tectonic characteristics of the crust were interpreted further by fitting of waveforms and seismic travel times. The results show that the top of the crystal- line basement is buried at depths of 2.0-4.0 kin, with the deepest buried up to 4.0 km within the Fuzhou Basin. The Moho in- terface was found to be deeper in the west and shallower in the east （i.e., 30.0 km near the coast, increasing to 33.0 km north- westward）. The lower crust on the east side of the Zhenghe-Haifeng Fault Zone has a smoothly varying gradient structure, whereas on the west side it has two distinct layers with a boundary between those layers at a depth of 23 km. Seismic velocities on the west side are generally lower than on the east side; a low velocity layer is observed with a lowest speed of 6.25 km/s at a depth of 22 km on the west side, which may consist of partially molten material. The Zhenghe-Haifeng Fault is a deep crustal fault, and should be a channel for deep material upwelling; it has a direct relationship with multiple stages of continental tectonic movements in Southern China and with multiple magmatic events that started in the Proterozoic and ended in the of late Tertiary in Fujian.

An explosive seismic sounding profile across the transition zone between west Kunlun Mts. and Tarim Basin

The explosive seismic sounding profile across the transition zone from the west Kunlun Mts. to the Tarim Basin revealed the complex deep structure formed by continent-continent collision on the northern margin of the Tibetan Plateau. The profile shows that the attitude of the Moho is in agreement with that of the crystalline basement in the Tarim Basin and the whole crust dips as a thick slate southwards with an angle from 5° to 7°. Meanwhile, the Moho depth increases from 40 km to 57 km within a distance of 150 km in the southern Tarim region, depicting the subduction of the crust of this region towards the west Kunlun Mts. The crust of the northern slope of the west Kunlun Mts. shows an evident compressed and shortened feature, that is, the basement is uplifted, the interface dips northwards and the Moho rises abruptly to become flat, so that the lower crust is as thick as 20 km.

The heterogeneous characteristics of crust-mantle structures and the seismic activities in the northwest Beijing region

In this paper, the abnormal characteristics of the crustal structures in the seismic active region, Yanqing-Huailai and Zhangbei-Shangyi, are obtained by means of comprehensively interpreting and studying the data of deep seis- mic sounding profiles passing through the northwestern part of Zhangjiakou-Bohai seismic zone. The results show that the fluctuation of crystalline basement in the study region is obvious and that there exist considerable differ- ences in depth in different geological units. The locally abrupt variation of crystalline basement depths may be regarded as a mark of existence of crystalline basement faults. These crystalline basement faults and deep crustal faults provide a pass for the magma upwelling, resulting in the strong inhomogeneity of crustal structures. These phenomena of the complex seismic reflected waves and locally discontinuous reflection zones with different en- ergy indicate that the intensive squeeze and deformation of crust took place, which have led to the complex crustal structures and offered the dynamic source for the earthquake occurrence in this region. The low velocity bodies in different depths of crust and the local interface C1 in Zhangbei-Shangyi region may result from repeated magmatic activities. The certain stress accumulation in the brittle upper crust can cause the occurrence of earthquake under the action of local tectonic activity.

Crustal structure in Xiaojiang fault zone and its vicinity

Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January of 2005, we present a 2-D P wave velocity structure along the profile. The crustal structure shows remarkable contrasts between the two sides of the Xiaojiang fault zone, although the whole profile is situated within the Yangtze platform. The average P wave velocities of the crust on the west and east sides of the fault zone are 6.21 km/s and 6.32 km/s, respectively, and the crustal thicknesses are 41 km and 45 km, respectively. These results imply that the crust to the east of the Xiaojiang fault zone presents characteristics of crustal structure in a stable platform, while the crust to the west is complicated with a lower velocity zone in middle of the upper crust. The average velocity of 6.21 km/s is lower than the global continental crustal average （6.30 km/s）, indicating that the region is tectonically active. According to the lateral variation of velocity and depth of interfaces （including the Moho）, it is inferred that the Xiaojiang fault zone has cut through the whole crust. It is also deduced that existence of low velocity zone in middle of the upper crust is conducive to the south-southeastern sliding of the Sichuan- Yunnan （Chuan-Dian） rhombus block.

Deep Background of Wenchuan Earthquake and the Upper Crust Structure beneath the Longmen Shan and Adjacent Areas

By analyzing the deep seismic sounding profiles across the Longmen Shan, this paper focuses on the study of the relationship between the upper crust structure of the Longmen Shan area and the Wenchuan earthquake. The Longmen Shan thrust belt marks not only the topographical change, but also the lateral velocity variation between the eastern Tibetan Plateau and the Sichuan Basin. A low-velocity layer has consistently been found in the crust beneath the eastern edge of the Tibetan Plateau, and ends beneath the western Sichuan Basin. The low-velocity layer at a depth of -20 km beneath the eastern edge of the Tibetan Plateau has been considered as the deep condition for favoring energy accumulation that formed the great Wenchuan earthquake.

Crustal structure beneath the Songpan——Garze orogenic belt

The Benzilan-Tangke deep seismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE. Based on the travel times and the related amplitudes of phases in the record sections, the 2-D P-wave crustal structure was ascertained in this paper. The velocity structure has quite strong lateral variation along the profile. The crust is divided into 5 layers, where the first, second and third layer belong to the upper crust, the forth and fifth layer belong to the lower crust. The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile, and it integrates into the overlying low velocity basement in the area to the north of Ma'erkang. The crustal structure in the section can be divided into 4 parts: in the south of Garze-Litang fault, between Garze-Litang fault and Xianshuihe fault, between Xianshuihe fault and Longriba fault and in the north of Longriba fault, which are basically coincided with the regional tectonics division. The crustal thickness decreases from southwest to northeast along the profile, that is, from 62 km in the region of the Jinshajiang River to 52 km in the region of the Yellow River. The Moho discontinuity does not obviously change across the Xianshuihe fault based on the PmP phase analysis. The crustal average velocity along the profile is lower, about 6.30 km/s. The Benzilan-Tangke profile reveals that the crust in the study area is orogenic. The Xianshuihe fault belt is located in the central part of the profile, and the velocity is positive anomaly on the upper crust, and negative anomaly on the lower crust and upper mantle. It is considered as a deep tectonic setting in favor of strong earthquake's accumulation and occurrence.

The Deep Geophysical Structure of the Middle Section of the Longmen Mountains Tectonic Belt and its Relation to the Wenchuan Earthquake

Investigation of the deep geophysical structure of the Longmen Mountains tectonic belt and its relation to the Wenchuan Earthquake is important for the study of earthquakes.By using magnetotelluric sounding profiles of the Luqu-Zhongjiang and Anxian-Suining; seismic sounding profiles of the Sichuan Maowen-Chongqing Gongtan,the Qinghai Huashi Gorge-Sichuan Jianyang,and the Batang-Zizhong; and magnetogravimetric data of the Longmen Mountains region,the deep geophysical structure of the Songpan-Ganzi block,the western Sichuan foreland basin,and the Longmen Mountains tectonic belt and their relation was discussed.The eastward extrusion of the Qinghai-Tibet Plateau thrusts the Songpan-Ganzi block upon the Yangtze block,which obstructs the eastward movement of the Qinghai-Tibet Plateau.The Maoxian-Wenchuan,Beichuan-Yingxiu,and Anxian-Guanxian faults of the Longmen Mountains fault belt dip to northwest with different dip angles and gradually converge in the deeper parts.Geophysical structure suggests that an intracrustal low-velocity,low-resistivity,and high-conductivity layer is common between the middle and upper crust west of the Longmen Mountains tectonic belt but not in the upper Yangtze block.The Sichuan Basin has a thick low-resistance sedimentary layer on a stable high-resistance basement; moreover,there are secondary paleohighs and depression structures at the lower part of the western Sichuan foreland basin with characteristic of high magnetic anomalies,whereas the Songpan-Ganzi block has a high resisitivity cover of upper crust and continues to a low-resistance layer.Considering the Longmen Mountains tectonic belt as the boundary,there are Bouguer gravity anomalies of ＂one belt between two zones.＂ Thus,we infer that there is a corresponding relation between the inferred crystalline basement of the Songpan block and the underlying basin basement of the Longmen Mountains fault belt.Furthermore,there may be an extensive ancient Yangtze block,which is west of the Ruoergai block.In addition,the crust-mantle ductile shear zone under the Longmen Mountains tectonic belt is the main fault,whereas the Beichuan-Yingxiu and Anxian-Guanxian faults at the surface are earthquake faults.The Wenchuan Ms 8.0 earthquake might be attributed to the collision of the Yangtze block and the Qinghai-Tibet Plateau.The eastward obduction of the eastern edge of the Qinghai-Tibet Plateau and eastward subduction of its deeper part under the influence of the collision of the Indian,Pacific,and Philippine Plates with the Eurasia Plate might have caused the Longmen Mountains tectonic belt to cut the Moho and extend to the middle and upper crust; thus,creating high stress concentration and rapid energy release zone.

Seismological study on the crustal structure of Tengchong volcanic-geothermal area

Based upon the deep seismic sounding profile conducted in the Tengchong volcanic-geothermal area, a two-dimensional crustal P velocity structure is obtained by use of the finite-difference inversion and the forward travel-time fitting method. The crustal model shows that there is a low velocity zone in upper crust in the Tengchong area, which may be related to the volcanic-geothermal activities, and two intracrustal faults (the LonglingRuili fault and Tengchong fault) exist on the profile, where the Tengchong fault may extend to the Moho discontinuity. Meanwhile, based on teleseismic data recorded by a temporary seismic network, we obtained the S-wave velocity structures beneath the RehaiRetian region in the Tengchong area, which show the low S-wave velocity anomaly in upper crust. The authors discuss the causes of Tengchong volcanic eruption based on the deep crustal structure. The crustal structure in the Tengchong volcanic-geothermal area is characterized by low P-wave and S-wave velocity, low resistivity, high heat-flow value and low Q value. The P-wave velocity in the upper mantle is also low. For this information, it can be induced that the magma in the crust is derived from the upper mantle, and the low velocity anomaly in upper crust in the Tengchong area may be related to the differentiation of magma. The Tengchong volcanoes are close to an active plate boundary and belong to plate boundary volcanoes.

Study of crustal structure with S-wave data from Maqen-Jingbian profile

D crustal velocity structure and vP/vS are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding (DSS) profile. The result shows that there exist obvious differences in 2-D S-wave velocity structure and vP/vS ratio structure along the profile. The S-wave velocities are low and vP/vS ratio is high for the western section of the profile and Haiyuan region, while they are normal for the middle and eastern sections. The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vP/vS ratio structure. It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities, but also to lithologic characters of the region.

Study on the crust-mantle structure in the central and southern parts of Shanxi

Another comparative interpretation was conducted with respect to the data from 5 DSS profiles in the central and southern parts of Shanxi, leading to the conclusion that in Linxian, Linfen and Xingtai earthquake regions, through which the five profiles pass, there exist anomalous crust mantle structure and abyssal crustal faults extending to Moho, all being regarded as the deep indications for earthquake occurrence.

Crustal wide-angle reflection imaging along Lianxian-Gangkou profile in Guangdong province,China

A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.

Investigation of plateau basin crustal structures and thickening mechanisms in the northeastern margin of the Tibetan plateau

This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.