One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the s...One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the sensor are introduced. Based on the experiments, the optimal values of the fuzzy control parameters α and k 3 are defined by means of the off line adjusting method. Because the self tuning fuzzy control is adopted in the seam tracking system, the overshoot of the system is restrained, the steady state error is reduced, and the system's response speed is improved effectively. The results of the SAW seam tracking experiments show that this system's tracking accuracy is up to ±0.5 mm and the system can satisfy the requirements of the engineering application.展开更多
Pneumatic artificial muscles (PAMs) have the highest power to weight and power to volume ratios of any actuator. Therefore, they can be used not only in rehabilitation engineering, but also as actuators in robots, inc...Pneumatic artificial muscles (PAMs) have the highest power to weight and power to volume ratios of any actuator. Therefore, they can be used not only in rehabilitation engineering, but also as actuators in robots, including industrial and therapy robots. Because PAMs have highly nonlinear and time‐varying behavior associated with gas compression and the nonlinear elasticity of bladder containers, achieving excellent tracking performance using classical controllers is difficult. An adaptive self‐tuning fuzzy controller (ASTFC) including adaptive fuzzy sliding mode control (AFSMC) and functional approximation (FA) was developed in this study for overcoming the aforementioned problems. The FA technique was used to release the model‐based requirements and the update laws for the coefficients of the Fourier series function parameters were derived using a Lyapunov function to guarantee control system stability. The experimental results verified that the proposed approach can achieve excellent control performance despite external disturbance.展开更多
In this paper, a novel adaptive fuzzy control scheme is presented. The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification,...In this paper, a novel adaptive fuzzy control scheme is presented. The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification, the updating rule base, the defuzzification, and the crisp controller (sub controller), etc. The adaptive fuzzy controller is designed in detail by means of a triangular membership function and the center of gravity method. The control scheme addressed here is implemented to control the motion of the end effector of a two link constrained flexible manipulator. Computer simulation results show that the novel adaptive fuzzy control scheme works quite well.展开更多
In this paper, a novel adaptive fuzzy control scheme is presented . The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification...In this paper, a novel adaptive fuzzy control scheme is presented . The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification, the updating rule base, the defuzzification, and the crisp controller (sub controller), etc. The adaptive fuzzy controller is designed in detail by means of triangular membership function and the center of gravity method. The control scheme addressed here is implemented to control the motion of the end effector of a two link constrained flexible manipulator. Computer simulation results show that the novel adaptive fuzzy control scheme works quite well.展开更多
文摘One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the sensor are introduced. Based on the experiments, the optimal values of the fuzzy control parameters α and k 3 are defined by means of the off line adjusting method. Because the self tuning fuzzy control is adopted in the seam tracking system, the overshoot of the system is restrained, the steady state error is reduced, and the system's response speed is improved effectively. The results of the SAW seam tracking experiments show that this system's tracking accuracy is up to ±0.5 mm and the system can satisfy the requirements of the engineering application.
文摘Pneumatic artificial muscles (PAMs) have the highest power to weight and power to volume ratios of any actuator. Therefore, they can be used not only in rehabilitation engineering, but also as actuators in robots, including industrial and therapy robots. Because PAMs have highly nonlinear and time‐varying behavior associated with gas compression and the nonlinear elasticity of bladder containers, achieving excellent tracking performance using classical controllers is difficult. An adaptive self‐tuning fuzzy controller (ASTFC) including adaptive fuzzy sliding mode control (AFSMC) and functional approximation (FA) was developed in this study for overcoming the aforementioned problems. The FA technique was used to release the model‐based requirements and the update laws for the coefficients of the Fourier series function parameters were derived using a Lyapunov function to guarantee control system stability. The experimental results verified that the proposed approach can achieve excellent control performance despite external disturbance.
文摘In this paper, a novel adaptive fuzzy control scheme is presented. The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification, the updating rule base, the defuzzification, and the crisp controller (sub controller), etc. The adaptive fuzzy controller is designed in detail by means of a triangular membership function and the center of gravity method. The control scheme addressed here is implemented to control the motion of the end effector of a two link constrained flexible manipulator. Computer simulation results show that the novel adaptive fuzzy control scheme works quite well.
文摘In this paper, a novel adaptive fuzzy control scheme is presented . The controller is constructed by using a table lookup scheme and self tuning techniques, which includes the identification block, the fuzzification, the updating rule base, the defuzzification, and the crisp controller (sub controller), etc. The adaptive fuzzy controller is designed in detail by means of triangular membership function and the center of gravity method. The control scheme addressed here is implemented to control the motion of the end effector of a two link constrained flexible manipulator. Computer simulation results show that the novel adaptive fuzzy control scheme works quite well.
