Long-term thinning decreases the contribution of heterotrophic respiration to soil respiration in subalpine plantations

Interest in the dynamics of soil respiration(R_(S))in subalpine forest ecosystems is increasing due to their high soil carbon density and potential sensitivity to environmental changes.However,as a principal silvicultural practice,the long-term impacts of thinning on R_(S) and its heterotrophic and autotrophic respiration components(R_(h) and Ra,respectively)in subalpine plantations are poorly understood,espe-cially in winter.A 3-year field observation was carried out with consideration of winter CO_(2) efflux in middle-aged sub-alpine spruce plantations in northwestern China.A trench-ing method was used to explore the long-term impacts of thinning on Rs,Rn and R_(a).Seventeen years after thinning,mean annual Rs,Rn and R_(a) increased,while the contribu-tion of R_(h) to R_(s) decreased with thinning intensity.Thinning significantly decreased winter R,because of the reduction in R_(n) but had no significant effect on Ra.The temperature sensitivity(Q_(10))of R_(h) and R_(a) also increased with thinning intensity,with lower Q_(10) values for R_(h)(2.1-2.6)than for Ra(2.4-2.8).The results revealed the explanatory variables and pathways related to R_(n) and R_(a) dynamics.Thinning increased soil moisture and nitrate nitrogen(NO_(3)^(-)-N),and the enhanced nitrogen and water availability promoted R_(h) and R_(a) by improving fine root biomass and microbial activity.Our results highlight the positive roles of NO_(3)^(-)-N in stimulating R_(s) components following long-term thinning.Therefore,applications of nitrogen fertilizer are not recommended while thinning subalpine spruce plantations from the perspective of reducing soil CO_(2) emissions.The increased Q_(10) values of R_(s) components indicate that a large increase in soil CO_(2) emissions would be expected following thinning because of more pronounced climate warming in alpineregions.

Phase Transformation Strengthening of Hot Extruded Inconel 625 under High-temperature Load Environment

Microstructure evolution and properties of hot-extruded Inconel 625 alloy were investigated at different creep temperatures, aging time and strain rates. The experimental results indicate that the Inconel 625 alloy exhibits an excellent creep resistance at 700 ℃ and below. When the creep temperature rises to 750 ℃, the creep resistance falls drastically due to the failure of phase transformation strengthening and the precipitation of a large amount of δ phase and σ phase at the grain boundary. The special temperature-sensitive characteristics of Inconel 625 alloy play a very important role in its fracture. When the strain rate is 8.33×10^-3s^-1, the strength of the specimen is higher than that of other parameters attributed to the effect of phase transformation strengthening. With the increase of Ni3(Al, Ti), the phase transformation strengthening inhibits thickening of the stacking faults into twins and improves the overall mechanical properties of the alloy. With the increase of the aging time, the granular Cr-rich M23C6 carbides continue to precipitate at the grain boundary, which hinders the movement of the dislocations and obviously increases the strength of the samples. Especially, the yield strength increases several times.

New Temperature Sensitive Genic Male Sterile Lines with Better Outcrossing Ability for Production of Two-Line Hybrid Rice

An investigation was carried out with three newly developed temperature sensitive genic male sterile （TGMS） lines for their floral traits, seed production potential and outcrossing ability in ten cross combinations. In the TGMS lines, fertile pollens had an average diameter of 0.89 mm while the sterile pollens was with 0.02 mm diameter.TS-29-150GY produced the biggest fertile pollens with 0.92 mm and other two lines produced relatively smaller pollens with 0.91 and 0.85 ram. Pollen fertility during the fertility reversion period was an average of 60.7%. TS-29-150GY had the maximum of 66.9% spikelet fertility whereas other two lines （TNAU18S and TNAU60S） had relatively lower spikelet fertility of 27.8% and 26.7%, respectively. Average of 17.00 g of seed yield was obtained in the TGMS lines during the fertility reversion period. TS-29- 150GY had the highest value of 21.20 g of seed yield while TNAU18S and TNAU60S produced 16.6 g and 13.2 g of seed yield, respectively. The low seed production ability of these three TGMS lines was attributed only to the environmental conditions prevailing during the period. All three TGMS lines had considerable outcrossing potential of 41.2%, 24.6% and 25.0%, respectively. The cross combinations viz. TNAU18S/IET21508 （36 g/plant）, TNAU18S/IET21044 （13 g/plant）, TNAU18S/IET21009 （26.5 g/plant）, TNAU60S/CB-09-106 （26.2 g/plant）, TNAU60S/IET21009 （14 g/plant） and TS29-150-GY/DRR 3306 （39.2 g/plant） showed perfect synchronization with acceptable hybrid seed yield, indicating suitability of TGMS system under Indian condition. Based on the outcrossing related traits viz. panicle exertion, angle of glume opening, stigma length and pollen size, TNAU18S was identified as the best, followed by TS-29-150GY.

Thermoreversible Thickening and Self-assembly Behaviors of pH/Temperature Dually Responsive Microgels with Interpenetrating Polymer Network Structure

The pH /temperature dually responsive microgels of interpenetrating polymer network( IPN) structure composed of poly( N-isopropylacrylamide)( PNIPAM) network and poly( acrylic acid)( PAA) network( PNIPAM /PAA IPN microgels) were synthesized by seed emulsion polymerization. The results obtained by dynamic laser light scattering( DLLS) show that the microgels have good pH /temperature dual sensitivities. The temperature sensitive component and the pH sensitive component inside the microgels have little interference with each other. The rheological properties of the concentrated PNIPAM /PAA IPN microgel dispersions as a function of temperature at pH 4. 0 or 7. 0 were investigated by viscometer,and the results displayed that only at pH 7. 0 the dispersions presented thermoreversible thickening behavior. Then the PNIPAM /PAA fibers were prepared by self-assembly of the PNIPAM /PAA IPN microgels in the ice-crystal templates formed by unidirectional liquid nitrogen freezing method. Field emission scanning electron microscopy( FESEM) images indicate that the PNIPAM /PAA fibers are rounded,randomly orientated and interweaved.

Compact temperature-insensitive modulator based on a silicon microring assistant Mach-Zehnder interferometer

On the silicon-on-insulator platform, an ultra compact temperature-insensitive modulator based on a cascaded microring assistant Mach-Zehnder interferometer is proposed and demonstrated with numerical simulation. According to the calculated results, the tolerated variation of ambient temperature can be as high as 134 ℃ while the footprint of such a silicon modulator is only 340 μm2.

Monitoring of steam chamber in steam-assisted gravity drainage based on the temperature sensitivity of oil sand

Thermosensitivity experiments and simulation calculations were conducted on typical oil sand core samples from Kinosis,Canada to predict the steam chamber development with time-lapse seismic data during the steam-assisted gravity drain-age(SAGD).Using an ultrasonic base made of polyether ether ketone resin instead of titanium alloy can improve the signal en-ergy and signal-to-noise ratio and get clear first arrival;with the rise of temperature,heavy oil changes from glass state(at-34.4℃),to quasi-solid state,and to liquid state(at 49.0℃)gradually;the quasi-solid heavy oil has significant frequency dis-persion.For the sand sample with high oil saturation,its elastic property depends mainly on the nature of the heavy oil,while for the sand sample with low oil saturation,the elastic property depends on the stiffness of the rock matrix.The elastic property of the oil sand is sensitive to temperature noticeably,when the temperature increases from 10℃ to 175℃,the oil sand samples decrease in compressional and shear wave velocities significantly.Based on the experimental data,the quantita-tive relationship between the compressional wave impedance of the oil sand and temperature was worked out,and the tem-perature variation of the steam chamber in the study area was predicted by time-lapse seismic inversion.

ON SWELLING CHARACTERISTICS AND MECHANISM OF TEMPERATURE SENSITIVE HYDROGELS

A series of N-substituted acrylamide monomers and the temperature sensitive hydrogels of their copolymer with N, N'-methylene-bis -acrylamide (Bis) have been synthesized. The effects of monomer structures, composition of the initial monomer mixture, polymerization temperature, the extent of ionization of the network and the presence of acid, base, salt or organic compound on the formation and the swelling characteristics of the temperature sensitive hydrogels have been systematically studied. The mechanism of the temperature sensitive phase transformation of the hydrogels was also investigated.

Studies on the Relation between the Composition of Thermal Sensitive MnZn Ferrite and Curie Temperature

Thermal sensitive MnZn ferrite is a kind of soft magnetic ferrite material with lower Curie temperature (Tc) and can be used to make many kinds of magnetic thermal sensitive sensors with high sensitivity. In this paper, the relation between the composition of thermal sensitive ferrite and TC was studied. It was found that TC changes linearly with ZnO extent when the content of Fe2O3 is fixed. Based on lots of experiments, an experimential formula to determine was given out.

Spatial distribution and driving factors of sediment net nitrogen mineralization in riparian zone of the Three Gorges Reservoir

Inorganic nitrogen(N)loss through sediment N mineralization is important for eutrophication surrounding riparian zone.Sediment physicochemical properties have been changed at water-level elevation in riparian zone of the Three Gorges Reservoir(TGR)due to differences in hydrological stress and human activity intensity.However,spatial distribution and driving factor of net N mineralization rate(Nmin)and its temperature sensitivity(Q10)based on the changes in sediment physicochemical properties are still unclear at waterlevel elevation in the riparian zone.A total of 132 sediment samples in the riparian zone were collected including 11 transections and 12 water-level elevations on basin scale of the TGR during drying period,to conduct a 28-day incubation at 15℃,22℃,29℃and 36℃.Nmin,total N(TN)and substrate quality(SQ)increased with water-level elevation,while Q10 showed an opposite trend(P<0.001).Results of the structural equation model showed that water-level elevation had direct positive effects on TN and SQ(P<0.01).In addition,TN was the major factor that had a direct positive effect on Nmin,and SQ was the crucial factor that had a direct negative effect on Q10(P<0.001).In conclusion,increases in TN and SQ were major driving factors of Nmin and its Q10 at water-level elevation,respectively,in riparian zone of the TGR during drying period.

Eff ects of environmental factors on the temporal and spatial variations in branch and leaf CO_(2)effl ux of Larix gmelinii var.principis-rupprechtii Mayr

The CO_(2)effl ux of branches and leaves plays an important role in ecosystem carbon balance.Using a carbon fl ux system,the effl ux of Larix gmelinii var.principisrupprechtii(Dahurian larch)was investigated in 27 years(immature),31 years(near-mature),and 47 years(mature)stands at diurnal,seasonal,and spatial scales(direction and height)as well as its connection with environmental factors from May to October 2020.Diurnal variation in effl ux was a single peak,and the maximum occurring between 14:00 and 16:00.Seasonal variation also exhibited a single peak,with the maximum in late July and the minimum in early October.From May to September,effl ux on the south side was the largest among the three stands,and mean values on the south side of 27 year-old,31 year-old,and 47 year-old trees were 0.50,0.97 and 1.05μmol·m^(–2)·s^(–1),respectively.The minimum occurred on the north side.Except for the maximum in July and September in the 27 year-old stand in the middle of the canopy,the maximum effl ux in the upper canopy,and the means in the 27 year-old,31 year-old,and 47 year-old stands were 0.49,0.96 and 1.04μmol·m^(-2)·s^(-1),respectively;the minimum occurred in the lower canopy.Temperatures and relative humidity infl uenced seasonal variations in effl ux.Seasonal variation in temperature sensitivity coeffi cient(Q 10)was opposite that of temperature,increasing with decreasing temperature.At the spatial scale,maximum Q 10 occurred in the mid canopy.With the effl ux and temperature data in diff erent locations,it is possible to better estimate effl ux variations in each stand.

Comparing the temperature sensitivity of organic matter decomposition in oxic and oxygen-deprived soils

No consistent variation was found in soil respiration Q10 under various O2 conditions.Substrate C quality had a strong effect on Q10 in oxic soils.N limitation had a large impact on Q10 in soils under O2 limitation.Current studies on the temperature sensitivity(Q10)of soil organic matter(SOM)decomposition mainly focus on aerobic conditions.However,varia-tions and determinants of Q10 in oxygen(O2)-deprived soils remain unclear.Here we incubated three grassland soils under oxic,suboxic,and anoxic conditions subjected to varying temperatures to compare variations in Q10 in relation to changing substrates.No consistent variation was found in Q10 under various O2 conditions.Further analysis of edaphic properties demon-strated that substrate carbon quality showed a strong influence on Q10 in oxic soils,whereas nitrogen limitation played a more important role in suboxic and anoxic soils.These results suggest that substrate carbon quality and nitrogen limitation may play roles of varying importance in determining the temperature sensitivity of SOM decomposition under various O2 conditions.

Soil CO_2 Emissions as Affected by 20-Year Continuous Cropping in Mollisols

Long-term continuous cropping of soybean （Glycine max）, spring wheat （Triticum aesativum） and maize （Zea mays） is widely practiced by local farmers in northeast China. A field experiment （started in 1991） was used to investigate the differences in soil carbon dioxide （CO2） emissions under continuous cropping of the three major crops and to evaluate the relationships between CO2 fluxes and soil temperature and moisture for Mollisols in northeast China. Soil CO2 emissions were measured using a closed-chamber method during the growing season in 2011. No remarkable differences in soil organic carbon were found among the cropping systems （P〉0.05）. However, significant differences in CO2 emissions from soils were observed among the three cropping systems （P〈0.05）. Over the course of the entire growing season, cumulative soil CO2 emissions under different cropping systems were in the following order： continuous maize （（829±10） g CO2 m2）〉continuous wheat （（629±22） g CO2 m^2）〉continuous soybean （（474±30） g CO2 m-2）. Soil temperature explained 42-65% of the seasonal variations in soil CO2 flux, with a Q10 between 1.63 and 2.31; water-filled pore space explained 25-47% of the seasonal variations in soil CO2 flux. A multiple regression model including both soil temperature （T, ~C） and water-filled pore space （W, %）, log（]）=a＋bT log（W）, was established, accounting for 51-66% of the seasonal variations in soil CO2 flux. The results suggest that soil CO2 emissions and their Q10 values under a continuous cropping system largely depend on crop types in Mollisols of Northeast China.

Modeling the contribution of abiotic exchange to CO_2 flux in alkaline soils of arid areas

Recent studies on alkaline soils of arid areas suggest a possible contribution of abiotic exchange to soil CO2 flux(Fc).However,both the overall contribution of abiotic CO2 exchange and its drivers remain unknown.Here we analyzed the environmental variables suggested as possible drivers by previous studies and constructed a function of these variables to model the contribution of abiotic exchange to Fc in alkaline soils of arid areas.An automated flux system was employed to measure Fc in the Manas River Basin of Xinjiang Uygur autonomous region,China.Soil pH,soil temperature at 0–5 cm(Ts),soil volumetric water content at 0–5 cm(θs)and air temperature at10 cm above the soil surface(Tas)were simultaneously analyzed.Results highlight reduced sensitivity of Fc to Ts and good prediction of Fc by the model Fc=R10Q10(Tas–10)/10+r7q7(pH–7)+λTas+μθs+e which represents Fc as a sum of biotic and abiotic components.This presents an approximate method to quantify the contribution of soil abiotic CO2 exchange to Fc in alkaline soils of arid areas.

Projections of the Advance in the Start of the Growing Season during the 21st Century Based on CMIP5 Simulations

It is well-known that global warming due to anthropogenic atmospheric greenhouse effects advanced the start of the vegetation growing season （SOS） across the globe during the 20th century. Projections of further changes in the SOS for the 21st century under certain emissions scenarios （Representative Concentration Pathways, RCPs） are useful for improving understanding of the consequences of global warming. In this study, we first evaluate a linear relationship between the SOS （defined using the normalized difference vegetation index） and the April temperature for most land areas of the Northern Hemisphere for 1982-2008. Based on this relationship and the ensemble projection of April temperature under RCPs from the latest state-of-the-art global coupled climate models, we show the possible changes in the SOS for most of the land areas of the Northern Hemisphere during the 21st century. By around 2040-59, the SOS will have advanced by -4.7 days under RCP2.6, -8.4 days under RCP4.5, and -10.1 days under RCPS.5, relative to 1985-2004. By 2080-99, it will have advanced by -4.3 days under RCP2.6, -11.3 days under RCP4.5, and -21.6 days under RCP8.5. The geographic pattern of SOS advance is considerably dependent on that of the temperature sensitivity of the SOS. The larger the temperature sensitivity, the larger the date-shift-rate of the SOS.

Dielectric Properties of Bi_4Ti_3O_(12) Ceramics by Impedance Spectroscopic Method

Various lead-free ceramics have been investigated in search for new high-temperature dielectrics. In particular, Bi_4Ti_3O_（12） is a type of ferroelectric ceramics, which is supposed to replace leadcontaining ceramics for its outstanding dielectric properties in the near future. Ferroelectric ceramics of Bi_4Ti_3O_（12） made by conventional mixed oxide route have been studied by impedance spectroscopy in a wide range of temperature. X-ray diffraction patterns show that Bi_4Ti_3O_（12） ceramics are a single-phase of ferroelectric Bi-layered perovskite structure whether it is calcined at 800 ℃ or after sintering production. This study focused on the effect of the grain size on the electric properties of BIT ceramics. The BIT ceramics with different grain sizes were prepared at different sintering temperatures. Grain becomes coarser with the sintering temperature increasing by 50 ℃, relative permittivity and dielectric loss also change a lot. When sintered at 1 100 ℃, r values peak can reach 205.40 at a frequency of 100 k Hz, the minimum dielectric losses of four different frequencies make no difference, all close to 0.027. The values of Ea range from 0.52 to 0.68 e V. The dielectric properties of the sample sintered at 1 100 ℃ are relatively better than those of the other samples by analyzing the relationship of the grain, the internal stresses, the homogeneity and the dielectric properties. SEM can better explain the results of the dielectric spectrum at different sintering temperatures. The results show that Bi_4Ti_3O_（12） ceramics are a kind of dielectrics. Thus, Bi_4Ti_3O_（12） can be used in high-temperature capacitors and microwave ceramics.

In-Situ Synthesized Myoglobin Imprinted Poly(N-Isopropylacrylamide)/Silica Nanocomposite Gels by Using the Molecular Imprinting Method

Temperature sensitive imprinted poly(N-isopropylacrylamide) nanocomposite gels were syntheses via in-situ, free radical crosslinking polymerization of corresponding monomer in nano-sized silica and five different concentrations of myoglobin solution by using the molecular imprinting method. Mb adsorption from five different concentrations of Mb solutions was investigated by two types of nanocomposite gel systems prepared by non-imprinted and imprinted methods. Nanocomposite gels imprinted with Mb showed higher adsorption capacity and specificity for Mb than nanocomposite gels prepared by the usual procedure. The highest Mb adsorption was observed via the imprinted nanocomposite gels with 12.5% Mb. In addition, selectivity studies were also performed by using two reference molecules as fibrinogen and hemoglobin. The imprinted nanocomposite gels had higher adsorption capacity for Mb than the non-imprinted gels and also exhibited good selectivity for Mb and high adsorption rate depending on the number of Mb sized cavities.

Numerical and experimental analysis of long period gratings in wavelength scale elliptical microfibers

We report the fabrication of long-period gratings （LPGs） in elliptical microfibers with femtosecond laser. Based on the numerical analysis of the modes and the mode coupling condition of elliptical microfibers, an LPG is fabricated with a very short pitch of 10 μm by periodically modifying the fiber surface, which demonstrates very strong polarization-dependent resonances, a very low temperature sensitivity of a few picometers in air, and high temperature sensitivity of -1.62 nm/℃ in refractive index oil.

Investigation of Strain-Temperature Cross-Sensitivity of FBG Strain Sensors Embedded Onto Different Substrates

The strain-temperature cross-sensitivity problem easily occurs in the engineering strain monitoring of the self-sensing embedded with fiber Bragg grating(FBG)sensors.In this work,a theoretical investigation of the strain-temperature cross-sensitivity has been performed using the temperature reference grating method.To experimentally observe and theoretically verify the problem,the substrate materials,the preloading technique,and the FBG initial central wavelength were taken as main parameters.And a series of sensitivity coefficients calibration tests and temperature compensation tests have been designed and carried out.It was found that when the FBG sensors were embedded on different substrates,their coefficients of the temperature sensitivity were significantly changed.Besides,the larger the coefficients of thermal expansion(CTE)of substrates were,the higher the temperature sensitivity coefficients would be.On the other hand,the effect of the preloading technique and FBG initial wavelength was negligible on both the strain monitoring and temperature compensation.In the case of similar substrates,we did not observe any difference between temperature sensitivity coefficients of the temperature compensation FBG with one free end or two free ends.The curves of the force along with temperature were almost overlapped with minor differences(less than 1%)gained by FBG sensors and pressure sensors,which verified the accuracy of the temperature compensation method.We suggest that this work can provide efficient solutions to the strain-temperature cross-sensitivity for engineering strain monitoring with the self-sensing element embedded with FBG sensors.

Rheological Properties and Microstructure of Printed Circuit Boards Modified Asphalt

The asphalt modified with different printed circuit boards(PCBs) content(0, 5%, 10%, and 15%) was prepared in this study. The general properties, rheological properties, temperature sensitivity, fatigue resistance, and morphology of the PCBs modified asphalt were investigated by conventional tests, the Brookfield viscometry tests, the dynamic shear rheometer(DSR) tests, the bending beam rheometer(BBR) tests, and the fluorescence microscopy tests. And the influence of PCBs content on the above-mentioned properties was analyzed systematically. The results showed that the addition of PCBs could improve the high temperature performance, the low temperature performance, and the temperature sensitivity property of the modified asphalt, while compromising with the fatigue resistance of the modified asphalt. With the increase of PCBs content, the modified asphalt could have better softening points, viscosity, failure temperature, and temperature sensitivity, while its low temperature performance and fatigue resistance became worse to different degree. And the particle size of PCBs became bigger and non-uniform with an increasing PCBs content. According to the above-mentioned properties, the optimum PCBs content was specified at less than 10% in the modified asphalt system.

Seasonal Changes in Soil Respiration with An Elevation Gradient in Abies nephrolepis(Trautv.)Maxim.Forests in North China

Soil respiration(Rs)plays an important role in regulating carbon cycle of terrestrial ecosystems and presents temporal and spatial heterogeneity.Abies nephrolepis is a tree species that prefers the cold and wet environment and is mainly distributed in Northeast Asia and East Asia.The Rs variations of Abies nephrolepis forests communities are generally environmental-sensitive and can effectively reflect the adaptive responses of forest ecosystems to climate change.In this study,the growing-seasonal variations of Rs,soil temperature,soil water content and soil properties of Abies nephrolepis forests were analyzed along an altitude gradient(2000,2100,2200 and 2300 m)over two years on Wutai Mountain in North China.As the main results showed,soil respiration keeps the same change trend as soil temperature and reached peaks in July at 2000 m in 2019 and 2020.During 26th July to 25th October in 2019 and 27th May to 23rd October in 2020,on the whole,the soil temperature independently explained 76.2%of Rs variations while the soil water content independently explained 26.8%.Soil temperature and soil water content jointly explained 81.8%of Rs variations.Soil properties explained 61.8%and 69.6%of Rs variation in 2019 and 2020,respectively.Soil organic carbon content and soil enzyme activity had the signifi-cant(P<0.01)negative and positive relationships,respectively,with Rs variation.With altitudes evaluated from 2000 to 2300 m,soil respiration temperature sensitivity(Q10)and the soil organic carbon content increased by 12.4%and 10.4%,respectively,while invertase activity,cellulase activity and urease activity dropped by 41.2%,29.45%and 38.19%,respectively.The results demonstrate that(1)soil temperature is the major factor affecting Rs variations in Abies nephrolepis forests;(2)weakened microbial carbon metabolism in high-altitude areas results in the accumulation of soil organic carbon;(3)with a higher Q10,forest ecosystems in high-altitude areas might be more easily affected by climate change;(4)climate warming might accelerate the consumption of soil organic carbon sink in forest ecosystems,especially in high-altitude areas.