Prediction of Instability Separation Modes and Its Application in Practical Dynamic Security Region

The transient critical boundary of dynamic security region (DSR) can be approximated by a few hyper planes correlated with instability separation modes. A method to fast predict instability separation modes is proposed for DSR calculation in power injection space. The method identifies coherent generation groups by the developed K-medoids algorithm, taking a similarity matrix derived from the reachability Grammian as the index. As an experimental result, reachability Grammian matrices under local injections are approximately invariant. It indicates that the generator coherency identifications are nearly consistent for different injections. Then instability separation modes can be predicted at the normal operating point, while average initial acceleration is considered as the measure of the critical generator group to amend the error. Moreover, based on these predicted instability separation modes, a critical point search strategy for DSR calculation is illustrated in the reduced injection space of the critical generators. The proposed method was evaluated using New England Test System, and the computation accuracy and speed in determining the practical DSR were improved.

Non-contact air-coupled transducers Lamb wave signal multipath effect and blind separation for different modes using PZT as receiver

Due to the complexity and faintness of the detection wave patterns obtained by aircoupled transducers,if it is possible to effectively separate the various modes and obtain nondispersive signals for more accurate detection and positioning,it will help to improve the accuracy and reliability of air-coupled ultrasonic Lamb wave detection,providing better technical support for the application and development of related fields.Because of the increased complexity of aircoupled signals,there is no definite theoretical formula to describe the mode changes of aircoupled signals,so the method based on blind separation has unique value.To address these challenges,the paper proposes a single-channel blind source separation(SCBSS)method.The effectiveness of this method is evaluated through simulations and experiments,demonstrating favorable separation results and efficient computational speed.This work first conducts an in-depth analysis of the signal characteristics of air-coupled ultrasonic non-destructive testing,and simulates the ultrasonic excitation conditions of air-coupled sensors through finite element software.The study of modal changes and multipath effects caused by the variation of the incidence angle of the ACT signal is carried out,and the situation of the Lamb wave signal excited by ACT at the receiving end is analyzed.By combining ACT with PZT signals,the ultrasonic signals of air-coupled Lamb waves are compared and studied,and their modal purification is carried out.

Wideband dispersion removal and mode separation of Lamb waves based on two-component laser interferometer measurement

Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to spread, and the modes overlap in both time and frequency domains as they propagate through the structures. By using a two-component laser interferometer technique, in combination with a priori knowledge of the dispersion characteristics and wave structure information of Lamb wave modes, a two-component signal processing technique is presented for implementing dispersion removal and mode separation simultaneously for two modes mixture signals of Lamb waves. The proposed algorithm is first processed and verified using synthetic Lamb wave signals. Then, the two-component displacements test experiment is conducted using different aluminum plate samples. Moreover, we confirm the effectiveness and robustness of this method.

Mode separation of resonant cavity by electromagnetic simulation

Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.

Influence of mode conversions in the skull on transcranial focused ultrasound and temperature fields utilizing the wave field separation method： A numerical study

Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a monkey skull with the time-reversal method. Mode conversions between compressional and shear waves exist in the skull. Therefore, the wave field separation method is introduced to calculate the contributions of the two waves to the acoustic intensity and the heat source, respectively. The Pennes equation is used to depict the temperature field induced by ultrasound. Five computational models with the same incident angle of 0？and different distances from the focus for the skull and three computational models at different incident angles and the same distance from the focus for the skull are studied. Numerical results indicate that for all computational models, the acoustic intensity at the focus with mode conversions is 12.05%less than that without mode conversions on average. For the temperature rise, this percentage is 12.02%. Besides, an underestimation of both the acoustic intensity and the temperature rise in the skull tends to occur if mode conversions are ignored. However, if the incident angle exceeds 30？, the rules of the over-and under-estimation may be reversed. Moreover,shear waves contribute 20.54% of the acoustic intensity and 20.74% of the temperature rise in the skull on average for all computational models. The percentage of the temperature rise in the skull from shear waves declines with the increase of the duration of the ultrasound.

Experimental Investigation of Flow Instabilities in a Laminar Separation Bubble

The present paper reports the results of a detailed experimental study aimed at investigating the dynamics of a laminar separation bubble, from the origin of separation up to the breakdown to turbulence of the large scale co- herent structures generated as a consequence of the Kelvin-Helmholtz instability process. Measurements have been performed along a fiat plate installed within a double contoured test section, designed to produce an adverse pressure gradient typical of Ultra-High-Lift turbine blade profiles, which induces the formation of a laminar separation bubble at low Reynolds number condition. Measurements have been carried out by means of comple- mentary techniques： hot-wire （HW） anemometry, Laser Doppler Velocirnetry （LDV） and Particle Image Veloci- metry （PIV）. The high accuracy 2-dimensional LDV results allow investigating reverse flow magnitude and both Reynolds normal and shear stress distributions along the separated flow region, while the high frequency response of the HW anemometer allows analyzing the amplification process of flow oscillations induced by instability mechanisms. PIV results complement the flow field analysis providing information on the generation and evolu- tion of the large scale coherent structures shed as a consequence of the separated shear layer roll-up, through in- stantaneous velocity vector maps. The simultaneous analysis of the data obtained by means of the different meas- uring techniques allows an in depth view of the instability mechanisms involved in the transition/reattachrnent processes of the separated shear layer.

Simulation and experimental characterization of a dual-mode two-section amplified feedback laser with mode separation over 100 GHz

A tunable two-section amplified feedback laser, which employs an amplifier section as the integrated feedback cavity, is designed and fabricated for dual-mode operation with mode separation of 100 GHz. Detailed simulations and experimental characterizations on the performance of the laser are presented. Promising dual-mode emission with continuous tuning range over 16 GHz（87.41–103.64 GHz） is experimentally demonstrated.

Optimal mode of capillary electrophoresis for the impurity analysis of β-lactam antibiotics

In order to determine the optimal mode of capillary electrophoresis for the impurity control of β-lactam antibiotics, different modes and various electrophoresis conditions for the separation of impurities were compared.The results showed that micellar electrokinetic capillary chromatography（MEKC） was the optimal separation mode for the impurity profiling of β-lactam antibiotics.In MEKC,not only the common R and S isomers,Δ-2 andΔ-3 isomers,and Z and E isomers,but also the impurities of β-lactam antibiotics could be well separated compared with the capillary zone electrophoresis.Therefore,MECK is the first choice for the separation of impurities of β-lactam antibiotics with capillary electrophoresis（CE）.The optimal separation could be achieved in MEKC by optimizing the pH and the concentrations of buffered saline,micelles and organic solvent（methanol） in running buffer.

Efficient separating orbital angular momentum mode with radial varying phase

It is shown that orbital angular momentum(OAM) is a promising new resource in future classical and quantum communications. However, the separation of OAM modes is still a big challenge. In this paper, we propose a simple and efficient separation method with a radial varying phase. In the method, specific radial varying phases are designed and modulated for different OAM modes. The resultant beam is focused to the spots with different horizontal and vertical positions after a convex lens, when the coordinate transformation, including two optical elements with coordinate transformation phase and correct phase, operates on the received beam.The horizontal position of the spot is determined by the vortex phases, and the vertical position of the spot is dependent on the radial varying phases. The simulation and experimental results show that the proposed method is feasible both for separation of two OAM modes and separation of three OAM modes. The proposed separation method is available in principle for any neighboring OAM modes because the radial varying phase is controlled. Additionally, no extra instruments are introduced, and there is no diffraction and narrowing process limitation for the separation.

High-Frequency Rayleigh-Wave Method

High-frequency （〉2 Hz） Rayleigh-wave data acquired with a multichannel recording system have been utilized to determine shear （S）-wave velocities in near-surface geophysics since the early 1980s. This overview article discusses the main research results of high-frequency surface-wave techniques achieved by research groups at the Kansas Geological Survey and China University of Geosciences in the last 15 years. The multichannel analysis of surface wave （MASW） method is a non-invasive acoustic approach to estimate near-surface S-wave velocity. The differences between MASW results and direct borehole measurements are approximately 15% or less and random. Studies show that simultaneous inversion with higher modes and the fundamental mode can increase model resolution and an investigation depth. The other important seismic property, quality factor （Q）, can also be estimated with the MASW method by inverting attenuation coefficients of Rayleigh waves. An inverted model （S-wave velocity or Q） obtained using a damped least-squares method can be assessed by an optimal damping vector in a vicinity of the inverted model determined by an objective function, which is the trace of a weighted sum of model-resolution and model-covariance matrices. Current developments include modeUng high-frequency Rayleigh-waves in near-surface media, which builds a foundation for shallow seismic or Rayleigh-wave inversion in the time-offset domain; imaging dispersive energy with high resolution in the frequency-velocity domain and possibly with data in an arbitrary acquisition geometry, which opens a door for 3D surface-wave techniques; and successfully separating surface-wave modes, which provides a valuable tool to perform S-wave velocity profiling with high-horizontal resolution.