Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as ...Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.展开更多
In this paper the effects of irradiation on the structures and properties of polysul-fone-polysiloxane multiblock copolymers and its important applied prospects are studied in detail.
A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide ...A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide with ethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by H-1-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanical properties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.展开更多
The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/M...The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.展开更多
A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS...A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation extents of the copolymer surface.XPS and contact angle measurements showed that the greater the phase separation extent was,the lower both the surface enrichment of PDMS and the surface free energy of the copolymer film were.The protein adsorption experiments indicated that the best phase separation did not exhibit the best biocompatibility.展开更多
The self-assembly of the linear rod-coil multiblock copolymers is studied by applying self-consistent-field lattice techniques in a three-dimensional （3D） space. Compared to the copolymer with one rod, the copolymer...The self-assembly of the linear rod-coil multiblock copolymers is studied by applying self-consistent-field lattice techniques in a three-dimensional （3D） space. Compared to the copolymer with one rod, the copolymer with more rods （mrod≥ 2） exhibits rich order-order phase transitions with increasing temperature, where the ordered morphology changes from strips to perforated lamellae and finally to lamellae. In addition, taking the copolymer with mrod = 2 as a representative, we fiarther study the effects of the volume fractions of the rods, the spacer coils and the end coils on the phase behaviors respectively, by which the detailed self-assembled mechanism of the linear rod-coil multiblock copolymers is revealed. Our results are expected to provide guidance for the design of the rod-coil materials.展开更多
A series of multiblock copolymers of PLLA\|PEG(PLE) with high molecular weight were synthesized by coupling PLLA\|PEG\|PLLA triblock copolymers with succinic anhydride in the presence of ( N,N\| dimethylamino) pyridin...A series of multiblock copolymers of PLLA\|PEG(PLE) with high molecular weight were synthesized by coupling PLLA\|PEG\|PLLA triblock copolymers with succinic anhydride in the presence of ( N,N\| dimethylamino) pyridine(DMAP) and dicyclohexylcarbodimide (DCC).The results of the viscometry measurement,GPC and 1H\|NMR,elucidated that multiblock PLE copolymers with high content of short PEG segments( M n=2000) had been successfully obtained.The crystallinity of the copolymers was investigated by X\|ray diffraction.Mechanical testing showed that multiblock copolymers had relatively high tensile strength and large elongation.In a word,the measurements showed that the multiblock PLE copolymers had high content of short PEG segments( M n=2000),high molecular weight( M w～100,000),excellent hydrophilicity and mechanical properties.The results of cells cultured on the multiblock PLE copolymer indicated that it might be suitable to be utilized as cell scaffold for tissue engineering.展开更多
基金The authors are Indebted to the National Basic Science Rescarch and Development Grants(973)(No.1999054306).
文摘Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.
基金Supported by the National Natural Science Foundation of China Laboratory of Polymer Physics of Academia Sinica of China
文摘In this paper the effects of irradiation on the structures and properties of polysul-fone-polysiloxane multiblock copolymers and its important applied prospects are studied in detail.
基金This work was supported by 863 Programme of China (No. 715-004-0010).
文摘A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide with ethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by H-1-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanical properties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.
文摘The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.
基金supported by the Shanghai Special Nano Foundation and Shanghai Sci.& Tech.Foundation.
文摘A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation extents of the copolymer surface.XPS and contact angle measurements showed that the greater the phase separation extent was,the lower both the surface enrichment of PDMS and the surface free energy of the copolymer film were.The protein adsorption experiments indicated that the best phase separation did not exhibit the best biocompatibility.
基金supported by the National Natural Science Foundation of China (Nos. 20804047, 20774096 and 20734003)Programs and the Fund for Creative Research Groups (No. 50921062)subsidized by the Special Funds for National Basic Research Program of China (Nos. 2009CB930100, 2010CB631100)
文摘The self-assembly of the linear rod-coil multiblock copolymers is studied by applying self-consistent-field lattice techniques in a three-dimensional （3D） space. Compared to the copolymer with one rod, the copolymer with more rods （mrod≥ 2） exhibits rich order-order phase transitions with increasing temperature, where the ordered morphology changes from strips to perforated lamellae and finally to lamellae. In addition, taking the copolymer with mrod = 2 as a representative, we fiarther study the effects of the volume fractions of the rods, the spacer coils and the end coils on the phase behaviors respectively, by which the detailed self-assembled mechanism of the linear rod-coil multiblock copolymers is revealed. Our results are expected to provide guidance for the design of the rod-coil materials.
文摘A series of multiblock copolymers of PLLA\|PEG(PLE) with high molecular weight were synthesized by coupling PLLA\|PEG\|PLLA triblock copolymers with succinic anhydride in the presence of ( N,N\| dimethylamino) pyridine(DMAP) and dicyclohexylcarbodimide (DCC).The results of the viscometry measurement,GPC and 1H\|NMR,elucidated that multiblock PLE copolymers with high content of short PEG segments( M n=2000) had been successfully obtained.The crystallinity of the copolymers was investigated by X\|ray diffraction.Mechanical testing showed that multiblock copolymers had relatively high tensile strength and large elongation.In a word,the measurements showed that the multiblock PLE copolymers had high content of short PEG segments( M n=2000),high molecular weight( M w～100,000),excellent hydrophilicity and mechanical properties.The results of cells cultured on the multiblock PLE copolymer indicated that it might be suitable to be utilized as cell scaffold for tissue engineering.
