The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an...The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the “k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.展开更多
Comprehensive optimization design of serpentine nozzle with trapezoidal outlet was studied to improve its aerodynamic and electromagnetic scattering performance.Serpentine nozzles with different center offsets and dif...Comprehensive optimization design of serpentine nozzle with trapezoidal outlet was studied to improve its aerodynamic and electromagnetic scattering performance.Serpentine nozzles with different center offsets and different ratios of the bases of the trapezoidal outlet were generated based on curvature control regulation.Computational Fluid Dynamics(CFD)simulations have been conducted to obtain the flow field in the nozzle,and Forward-Backward Iterative Physical Optics(FBIPO)method was applied to study the electromagnetic scattering characteristics of the nozzle.Guarantee Convergence Particle Swarm Optimization(GCPSO)algorithm based on Radial Basis Function(RBF)neural network was used to optimize the geometry of the nozzle in consideration of its aerodynamic and electromagnetic scattering characteristics.The results show that the GCPSO method based on RBF can be used to optimize the aerodynamic characteristics of the internal flow and the scattering characteristics of the cavity of the serpentine nozzle with irregular outlet.The optimized model has a higher center offset and a lower ratio of the bases of the trapezoidal outlet after optimization compared to the original model.The optimized model leads to a slight change in aerodynamic performance,with a total pressure recovery coefficient increase of 0.31%and a discharge coefficient increase of 0.41%.In addition,the Radar Cross Section(RCS)decreases also by around 83.33%and the overall performance is significantly improved,with a decrease of the optimized objective function by around 38.74%.展开更多
Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets a...Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets are established.Using computational fluid dynamics and Taguchi method,the influence mechanisms of the Distribution of Area(DA),Distributions of Centerline for the first and second‘S’sections in the Vertical direction(DCV1 and DCV2),and Distribution of Centerline in the Spanwise direction(DCS)are analyzed.The impact of these factors on the total pressure recovery coefficient can be ranked as DA>DCV2>DCS>DCV1,whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2>DCS>DA>DCV1.Considering the statistical significance of these factors,a nozzle in which DA changes rapidly at the exit and DCV1,DCV2,and DCS change rapidly at the entrance gives the best aerodynamic performance.Compared to the worst configuration,the total pressure recovery coefficient,discharge coefficient,and axial thrust coefficient are improved by 1.6%,3.5%and 3.6%,respectively.DA influences the gas flow acceleration in the entire serpentine channel,resulting in different wall shear stress and friction losses.The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constantarea extension section,resulting in different local and friction losses.展开更多
基金supported by the Science Center for Gas Turbine Project,China(Nos.P2022-B-Ⅱ-010-001 and P2022-B-I-002-001)the National Natural Science Foundation of China(Nos.52376032 and 52076180)+2 种基金the Funds for Distinguished Young Scholars of Shaanxi Province,China(No.2021JC-10)the National Science and Technology Major Project,China(No.J2019-Ⅱ-0015-0036)the Fundamental Research Funds for the Central Universities,China(No.501XTCX2023146001).
文摘The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the “k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.
基金the financial support of the Fundamental Research Funds for the Central Universities(No.31020190MS708)。
文摘Comprehensive optimization design of serpentine nozzle with trapezoidal outlet was studied to improve its aerodynamic and electromagnetic scattering performance.Serpentine nozzles with different center offsets and different ratios of the bases of the trapezoidal outlet were generated based on curvature control regulation.Computational Fluid Dynamics(CFD)simulations have been conducted to obtain the flow field in the nozzle,and Forward-Backward Iterative Physical Optics(FBIPO)method was applied to study the electromagnetic scattering characteristics of the nozzle.Guarantee Convergence Particle Swarm Optimization(GCPSO)algorithm based on Radial Basis Function(RBF)neural network was used to optimize the geometry of the nozzle in consideration of its aerodynamic and electromagnetic scattering characteristics.The results show that the GCPSO method based on RBF can be used to optimize the aerodynamic characteristics of the internal flow and the scattering characteristics of the cavity of the serpentine nozzle with irregular outlet.The optimized model has a higher center offset and a lower ratio of the bases of the trapezoidal outlet after optimization compared to the original model.The optimized model leads to a slight change in aerodynamic performance,with a total pressure recovery coefficient increase of 0.31%and a discharge coefficient increase of 0.41%.In addition,the Radar Cross Section(RCS)decreases also by around 83.33%and the overall performance is significantly improved,with a decrease of the optimized objective function by around 38.74%.
基金supported by the National Science and Technology Major Project of China(No.J2019-III-0009-0053).
文摘Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics.Based on the layout characteristics within a confined space,a series of double serpentine nozzles with spanwise offsets are established.Using computational fluid dynamics and Taguchi method,the influence mechanisms of the Distribution of Area(DA),Distributions of Centerline for the first and second‘S’sections in the Vertical direction(DCV1 and DCV2),and Distribution of Centerline in the Spanwise direction(DCS)are analyzed.The impact of these factors on the total pressure recovery coefficient can be ranked as DA>DCV2>DCS>DCV1,whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2>DCS>DA>DCV1.Considering the statistical significance of these factors,a nozzle in which DA changes rapidly at the exit and DCV1,DCV2,and DCS change rapidly at the entrance gives the best aerodynamic performance.Compared to the worst configuration,the total pressure recovery coefficient,discharge coefficient,and axial thrust coefficient are improved by 1.6%,3.5%and 3.6%,respectively.DA influences the gas flow acceleration in the entire serpentine channel,resulting in different wall shear stress and friction losses.The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constantarea extension section,resulting in different local and friction losses.
